Attempting to update to 23.01 DEVEL corrupts my pfSense installation
-
Not any from the interface status page
-
Hmm did we just skip a version?
-
@chickendog did it work?
Says one of the files can't be found, and fails for me. -
@stephenw10
My guess is their was a driver change in freebsd 14? -
@chickendog ignore my previous post. I did have a failure from the cli, but it seems to have resolved.
Now I have this weirdness:23.05-DEVELOPMENT (amd64)
built on Mon Jan 09 06:04:59 UTC 2023
FreeBSD 14.0-CURRENTThe system is on a later version than official release.
Version information updated at Mon Jan 9 8:19:14 EST 2023 -
@mtarbox Yeah I didn't try update, seemed too scary to go from 23.01 Beta to 23.05 Alpha.
Was scared a dev committed the wrong thing accidentally
-
@chickendog 23.01 RC is out now.
Ted Quade
-
Is 20230109-0600 the RC release? My pfsense update page is still showing 23.01.b.20230106.0600 as the latest dev
-
The branch only just happened so at this point 23.05a is almost identical to 23.01. BUT you don't want to be on that branch because downgrading is far more difficult so I would wait until you see 23.01r (RC) offered. Which should be shortly.
(If you are running ZFS of course you can just roll back the BE)
-
@stephenw10 Awesome, thanks Stephen
-
@stephenw10 well of course I jumped on that sword.
Everything seemed fine when I left the house this morning, and I haven't had any angry texts yet today. -
@mtarbox 23.01-RC (amd64)
built on Sun Jan 08 15:18:55 UTC 2023
FreeBSD 14.0-CURRENTUpgrade was uneventful.
Ted Quade
-
@tedquade Nice! just came up for me too. Done without any issue as well.
-
@tedquade rolled it back, THANK GOODNESS FOR ZFS, rebooted to 23.01.b, and voila, there was the RC, all nice and shiny. Gave it the old cli razzle-dazzle, reboot, and after acknowledging things, all was good in my world. Also deleted the 23.05 environment.
-
Successful update to 23.01.r.20230108.1514
-
The dev branch on my pfsense still only shows 23.01.b.20230106.0600 available. No RC
-
If you're running 22.05 that's what it will show. Once you upgrade to that you will see RC available.
-
OK, got it.. Thanks
-
Updated this morning and everything looks to have gone well after a few reboots and reloads to make pfblocker happy.
However, I noticed that I no longer have any selections for Branch
I was also expecting to now see an RC option but do not see that.
-
Most likely your NDI changed from that originally registered. Did you change the hardware?
