Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    SG-5100 hangs durring reboot.

    Scheduled Pinned Locked Moved Official Netgate® Hardware
    24 Posts 3 Posters 2.3k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • stephenw10S
      stephenw10 Netgate Administrator
      last edited by

      Yes, I think we'll need to see a console log showing exactly where it stops responding.

      You might try entering 'ctl+t' at that point to see if it's waiting on a process.

      1 Reply Last reply Reply Quote 0
      • H
        hirenz
        last edited by stephenw10

         0) Logout (SSH only)                  9) pfTop
         1) Assign Interfaces                 10) Filter Logs
         2) Set interface(s) IP address       11) Restart webConfigurator
         3) Reset webConfigurator password    12) PHP shell + Netgate pfSense Plus tools
         4) Reset to factory defaults         13) Update from console
         5) Reboot system                     14) Disable Secure Shell (sshd)
         6) Halt system                       15) Restore recent configuration
         7) Ping host                         16) Restart PHP-FPM
         8) Shell
        
        Enter an option: 5
        
        
        Netgate pfSense Plus will reboot. This may take a few minutes, depending on your hardware.
        Do you want to proceed?
        
            Y/y: Reboot normally
            R/r: Reroot (Stop processes, remount disks, re-run startup sequence)
            S: Reboot into Single User Mode (requires console access!)
            Enter: Abort
        
        Enter an option: y
        
        Netgate pfSense Plus is rebooting now.
         Stopping package nut...done.
         Stopping package suricata...done.
         Stopping package Avahi...done.
         Stopping package squid3...done.
         Stopping package Telegraf...done.
         Stopping /usr/local/etc/rc.d/haproxy.sh...done.
         Stopping /usr/local/etc/rc.d/pfb_dnsbl.sh...done.
         Stopping /usr/local/etc/rc.d/pfb_filter.sh...done.
         Stopping /usr/local/etc/rc.d/shutdown.nut.sh...done.
         Stopping /usr/local/etc/rc.d/sqp_monitor.sh...done.
         Stopping /usr/local/etc/rc.d/vnstatd.sh...done.
        pflog0: promiscuous mode disabled
        ovpns1: link state changed to DOWN
        Waiting (max 60 seconds) for system process `vnlru' to stop... done
        Waiting (max 60 seconds) for system process `syncer' to stop...
        Syncing disks, vnodes remaining... 0 0 0 0 0 done
        All buffers synced.
        Uptime: 4d0h9m40s
        Khelp module "ertt" can't unload until its refcount drops from 26 to 0.
        ix1: link state changed to DOWN
        ix0: link state changed to DOWN
        lagg0: link state changed to DOWN
        lagg0.50: link state changed to DOWN
        lagg0.2: link state changed to DOWN
        lagg0.70: link state changed to DOWN
        lagg0.101: link state changed to DOWN
        lagg0.20: link state changed to DOWN
        lagg0.201: link state changed to DOWN
        lagg0.301: link state changed to DOWN
        uhub0: detached
        
        H 1 Reply Last reply Reply Quote 0
        • H
          hirenz @hirenz
          last edited by

          I didnt do ctrl-t, c, or d this time. The console over usb goes non responsive.
          I have tried to hard reboot using the power switch on the back of the device and it just turns off and will not power back on until the power has been disconnected.

          1 Reply Last reply Reply Quote 0
          • stephenw10S
            stephenw10 Netgate Administrator
            last edited by

            Ok, so ctl+t shows nothing when entered there?

            H 1 Reply Last reply Reply Quote 0
            • H
              hirenz @stephenw10
              last edited by

              @stephenw10 Correct, It just sits.

              1 Reply Last reply Reply Quote 0
              • stephenw10S
                stephenw10 Netgate Administrator
                last edited by

                Do you have any USB devices attached to it?
                We have seen one other case where here was a USB device that prevented it rebooting.

                1 Reply Last reply Reply Quote 0
                • H
                  hirenz
                  last edited by

                  The only usb devices that are connected would be the UPS (never had an issue with it before) and the mini-usb for console. I have tried with the the UPS instead unplugged.

                  Does the sata m.2 port use pcie or usb to connect?

                  1 Reply Last reply Reply Quote 0
                  • stephenw10S
                    stephenw10 Netgate Administrator
                    last edited by

                    It uses SATA. It's not a PCIe or USB device.

                    Try booting verbose to see if you get any more info. At the boot loader menu hit esc to reach the prompt then enter boot -v.

                    Steve

                    H 1 Reply Last reply Reply Quote 0
                    • H
                      hirenz @stephenw10
                      last edited by

                      =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2023.02.22 17:53:44 =~=~=~=~=~=~=~=~=~=~=~=
                      
                      
                      
                      Netgate pfSense Plus will reboot. This may take a few minutes, depending on your hardware.
                      Do you want to proceed?
                      
                          Y/y: Reboot normally
                          R/r: Reroot (Stop processes, remount disks, re-run startup sequence)
                          S: Reboot into Single User Mode (requires console access!)
                          Enter: Abort
                      
                      Enter an option: y
                      
                      Netgate pfSense Plus is rebooting now.
                       Stopping package nut...done.
                       Stopping package suricata...done.
                       Stopping package Avahi...done.
                       Stopping package squid3...done.
                       Stopping package Telegraf...done.
                       Stopping /usr/local/etc/rc.d/haproxy.sh...done.
                       Stopping /usr/local/etc/rc.d/pfb_dnsbl.sh...done.
                       Stopping /usr/local/etc/rc.d/pfb_filter.sh...done.
                       Stopping /usr/local/etc/rc.d/shutdown.nut.sh...done.
                       Stopping /usr/local/etc/rc.d/sqp_monitor.sh...done.
                       Stopping /usr/local/etc/rc.d/vnstatd.sh...done.
                      pflog0: promiscuous mode disabled
                      ovpns1: link state changed to DOWN
                      Waiting (max 60 seconds) for system process `vnlru' to stop... done
                      Waiting (max 60 seconds) for system process `syncer' to stop... 
                      Syncing disks, vnodes remaining... 0 0 0 0 0 done
                      All buffers synced.
                      Swap device ada0p2 removed.
                      Uptime: 3m56s
                      (ada0:ahcich0:0:0:0): spin-down
                      Khelp module "ertt" can't unload until its refcount drops from 37 to 0.
                      ix1: Link is Down
                      ix1: link state changed to DOWN
                      ix0: Link is Down
                      ix0: link state changed to DOWN
                      lagg0: link state changed to DOWN
                      lagg0.50: link state changed to DOWN
                      lagg0.2: link state changed to DOWN
                      lagg0.70: link state changed to DOWN
                      lagg0.101: link state changed to DOWN
                      lagg0.20: link state changed to DOWN
                      lagg0.201: link state changed to DOWN
                      lagg0.301: link state changed to DOWN
                      uhub0: detached
                      unknown: wake_prep disabled wake for \_SB_.PCI0.PEX0 (S5)
                      unknown: wake_prep disabled wake for \_SB_.PCI0.PEX1 (S5)
                      unknown: wake_prep disabled wake for \_SB_.PCI0.PEX2 (S5)
                      unknown: wake_prep disabled wake for \_SB_.PCI0.PEX3 (S5)
                      pcib2: wake_prep disabled wake for \_SB_.PCI0.PEX4 (S5)
                      pcib3: wake_prep disabled wake for \_SB_.PCI0.PEX5 (S5)
                      pcib4: wake_prep disabled wake for \_SB_.PCI0.PEX6 (S5)
                      pcib5: wake_prep disabled wake for \_SB_.PCI0.PEX7 (S5)
                      xhci0: wake_prep disabled wake for \_SB_.PCI0.XHC1 (S5)
                      ix0: wake_prep disabled wake for \_SB_.PCI0.VRP0.LAN0 (S5)
                      ix1: wake_prep disabled wake for \_SB_.PCI0.VRP0.LAN1 (S5)
                      ix2: wake_prep disabled wake for \_SB_.PCI0.VRP1.LAN2 (S5)
                      ix3: wake_prep disabled wake for \_SB_.PCI0.VRP1.LAN3 (S5)
                      

                      It looks like its not related to the uhub0 as I originally though. I let it sit at this point for about 10 minutes
                      Pressing ctrl-t did nothing as well.

                      1 Reply Last reply Reply Quote 0
                      • stephenw10S
                        stephenw10 Netgate Administrator
                        last edited by

                        Hmm, that looks like it might be Wake-on-LAN related.

                        Have you configured anything differently in the BIOS?

                        1 Reply Last reply Reply Quote 0
                        • H
                          hirenz
                          last edited by

                          I have not, in fact I had never been in the bios until I was trying to troubleshoot this. I don’t think I changed anything but I can set it back to defaults and ensure WoL is disabled.

                          1 Reply Last reply Reply Quote 0
                          • stephenw10S
                            stephenw10 Netgate Administrator
                            last edited by

                            Seems unrelated in fact. My test 5100 also shows that in verbose mode but reboots as expected.

                            Hard to imagine it could be anything but a BIOS setting or actual hardware at that point.

                            H 1 Reply Last reply Reply Quote 0
                            • H
                              hirenz @stephenw10
                              last edited by

                              When I have time for a longer downtime I’ll get the latest factory image, reset the bios and reflash the os. Maybe even get a new boot disk. I vaguely remember this one being a cheaper one I got for a project that fell through and got tossed in a drawer.

                              1 Reply Last reply Reply Quote 0
                              • stephenw10S
                                stephenw10 Netgate Administrator
                                last edited by

                                It's a possibility but it's hard to see what might have changed in 23.01 that could cause it.

                                The 5100 can be installed UEFI or legacy (BIOS). Try running: sysctl machdep.bootmethod to find out. My test box is currently BIOS.

                                Steve

                                1 Reply Last reply Reply Quote 0
                                • H
                                  hirenz
                                  last edited by hirenz

                                  Mine is currently in BIOS mode as well. However I’m not sure it’s related to 23.01.

                                  1 Reply Last reply Reply Quote 0
                                  • stephenw10S
                                    stephenw10 Netgate Administrator
                                    last edited by

                                    Ah, you think it may have also been hanging there in 22.05?

                                    1 Reply Last reply Reply Quote 0
                                    • H
                                      hirenz
                                      last edited by

                                      It was. I’m trying to remember when the last time I actually had to reboot was. I feel the rolling blackouts in December were fine but those also caused full power loss. But I vaguely remember having to pull the power for a reboot before then.

                                      It started after replacing the drive but not immediately.

                                      But it was most noticeable when I tried to install the 23.01 rc. Since it hung rebooting while still in 22.05.

                                      After performing a nfs snapshot restore to 22.05 I had the same issue rebooting.

                                      1 Reply Last reply Reply Quote 0
                                      • stephenw10S
                                        stephenw10 Netgate Administrator
                                        last edited by

                                        Ah, OK. That does start to seem like it might be the drive then.

                                        I have experienced pretty much the same thing with a rogue drive in an MBT-4220. Not seen it in a 5100 but it could be possible.

                                        1 Reply Last reply Reply Quote 0
                                        • H
                                          hirenz
                                          last edited by

                                          Do you have any drives you would suggest or recommend?

                                          1 Reply Last reply Reply Quote 0
                                          • stephenw10S
                                            stephenw10 Netgate Administrator
                                            last edited by

                                            I have the drive we fitted to various devices which unhelpfully shown as 'NT-32'.

                                            There are a few threads here with other users reporting the drives they used in 5100s. I don't really have anything I can recommend personally.

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.