-
@bavcon22 said in TL-WN727N as WAN interface:
The M7350 does not offer port forwarding over USB connection.
Does it offer port forwarding at all? I don't imagine it uses a different subnet for the virtual Ethernet port. If it has any sort of forwarding capability I would expect to be able to use it with a USB connected client device.
-
@stephenw10 The device tp-link M7350 has NAT forwarding section and subsections with name:
-
Application Layer Gateway (ALG)
-
Virtual Servers
-
Port Triggering
-
DMZ
-
UPnP
Picture from Virtual Servers:
Telnet is only for representation, I do not use it. I only use this for VPN. -
-
@bavcon22 Virtual servers is port forwarding with NAT (ie, in pure port forwarding ports are the same internal, same external. Here they can be different internal, different external).
-
Yes that. And the DMZ section would almost certainly allow you to pass all traffic to pfSense which is probably what you want here.
-
@stephenw10 My public ip is
at the same time the modem IP is
My question: Is there another NAT or what?
If I'm conected with my phone directly to M7350 LAN with pfSense the VPN works, but in mobile networks does not work at all.On M7350 I tried the DMZ with no luck and forward the port also with no luck.
I think the ISP has another NAT that I can't access it. -
Yes, there could be be CG-NAT at the cell provider. Probably nothing you can do about that unless they offer you a static IP at additional cost.
-
@stephenw10 Just a note, at least in my country (Greece), bitching to ISP tech support can surprise you. I got them to not just remove my account from CG-NAT, but to also remove the MAC ACL for my account AND provide a (CG-NATed) IPv4/32 for the CPE (telephony). I still don't know how to get them to provide a guaranteed static IPv6 prefix...
-
Nice. Never hurts to ask I guess.
-
@nightlyshark Thank you for jour help.
-
@stephenw10 Thank you for your help.
