Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Supermicro AOC-STGN-I2S - 1Gbps support?

    Scheduled Pinned Locked Moved Hardware
    17 Posts 2 Posters 1.3k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • stephenw10S
      stephenw10 Netgate Administrator
      last edited by

      Does it see the module correctly in the verbose ifconfig output.

      M 1 Reply Last reply Reply Quote 0
      • M
        moosport @stephenw10
        last edited by

        @stephenw10 ```
        Here is the results of ifconfig. It only shows the 2 active interface. WAN and LAN.

        [2.6.0-RELEASE][pfSense.local]/root: ifconfig
ix0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=e138bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,RXCSUM_IPV6,TXCSUM_IPV6>
	ether 0c:c4:7a:1f:81:66
	inet6 fe80::ec4:7aff:fe1f:8166%ix0 prefixlen 64 scopeid 0x1
	inet6 fe80::1:1%ix0 prefixlen 64 scopeid 0x1
	inet6 2603:8001:9301:d13e:ec4:7aff:fe1f:8166 prefixlen 64
	inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
	media: Ethernet autoselect (10Gbase-Twinax <full-duplex,rxpause,txpause>)
	status: active
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
ix1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	description: OPT1
	options=e138bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,RXCSUM_IPV6,TXCSUM_IPV6>
	ether 0c:c4:7a:1f:81:67
	inet6 fe80::ec4:7aff:fe1f:8167%ix1 prefixlen 64 scopeid 0x2
	inet 192.168.20.1 netmask 0xffffff00 broadcast 192.168.20.255
	media: Ethernet autoselect
	status: no carrier
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=81009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,VLAN_HWFILTER>
	ether f8:75:a4:88:a7:b3
	inet6 fe80::fa75:a4ff:fe88:a7b3%em0 prefixlen 64 scopeid 0x3
	inet6 2605:e000:7fc0:71:a0a1:eb1d:67ad:b073 prefixlen 128
	inet 76.91.240.192 netmask 0xfffff000 broadcast 255.255.255.255
	media: Ethernet autoselect (1000baseT <full-duplex>)
	status: active
	nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
enc0: flags=0<> metric 0 mtu 1536
	groups: enc
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
	inet 127.0.0.1 netmask 0xff000000
	groups: lo
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
pflog0: flags=100<PROMISC> metric 0 mtu 33160
	groups: pflog
pfsync0: flags=0<> metric 0 mtu 1500
	groups: pfsync

        Output of each 10Gbps interface.

        [2.6.0-RELEASE][pfSense.local]/root:ifconfig ix0
        ix0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=e138bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,RXCSUM_IPV6,TXCSUM_IPV6>
        ether 0c:c4:7a:1f:81:66
        inet6 fe80::ec4:7aff:fe1f:8166%ix0 prefixlen 64 scopeid 0x1
        inet6 fe80::1:1%ix0 prefixlen 64 scopeid 0x1
        inet6 2603:8001:9301:d13e:ec4:7aff:fe1f:8166 prefixlen 64
        inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
        media: Ethernet autoselect (10Gbase-Twinax <full-duplex,rxpause,txpause>)
        status: active
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        [2.6.0-RELEASE][pfSense.local]/root: ifconfig ix1
        ix1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: OPT1
        options=e138bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,RXCSUM_IPV6,TXCSUM_IPV6>
        ether 0c:c4:7a:1f:81:67
        inet6 fe80::ec4:7aff:fe1f:8167%ix1 prefixlen 64 scopeid 0x2
        inet 192.168.20.1 netmask 0xffffff00 broadcast 192.168.20.255
        media: Ethernet autoselect
        status: no carrier
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>

        1 Reply Last reply Reply Quote 0
        • stephenw10S
          stephenw10 Netgate Administrator
          last edited by

          Sorry, we need the verbose output ifconfig -vvv to see the module info really.

          What we can see there looks as expected though.

          M 1 Reply Last reply Reply Quote 0
          • M
            moosport @stephenw10
            last edited by

            @stephenw10
            Here is the verbose output.

            ifconfig -vvv
ix0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=e138bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,RXCSUM_IPV6,TXCSUM_IPV6>
	ether 0c:c4:7a:1f:81:66
	inet6 fe80::ec4:7aff:fe1f:8166%ix0 prefixlen 64 scopeid 0x1
	inet6 fe80::1:1%ix0 prefixlen 64 scopeid 0x1
	inet6 2603:8001:9301:d13e:ec4:7aff:fe1f:8166 prefixlen 64
	inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
	media: Ethernet autoselect (10Gbase-Twinax <full-duplex,rxpause,txpause>)
	status: active
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	plugged: SFP/SFP+/SFP28 Unknown (Copper pigtail)
	vendor: OEM PN: SFP-H10GB-CU1M SN: CSC200902630153 DATE: 2020-09-23

	SFF8472 DUMP (0xA0 0..127 range):
	03 04 21 00 00 00 00 00 04 00 00 00 67 00 00 00 
	00 00 01 00 4F 45 4D 20 20 20 20 20 20 20 20 20 
	20 20 20 20 00 00 40 20 53 46 50 2D 48 31 30 47 
	42 2D 43 55 31 4D 20 20 52 20 20 20 01 00 00 F3 
	00 00 00 00 43 53 43 32 30 30 39 30 32 36 33 30 
	31 35 33 20 32 30 30 39 32 33 20 20 00 00 00 C8 
	80 00 11 C6 7E 6C 05 70 09 C4 18 34 1E E2 F0 8B 
	82 4A 8E 00 00 00 00 00 00 00 00 00 15 84 F5 72 
ix1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	description: OPT1
	options=e138bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,RXCSUM_IPV6,TXCSUM_IPV6>
	ether 0c:c4:7a:1f:81:67
	inet6 fe80::ec4:7aff:fe1f:8167%ix1 prefixlen 64 scopeid 0x2
	inet 192.168.20.1 netmask 0xffffff00 broadcast 192.168.20.255
	media: Ethernet autoselect
	status: no carrier
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	plugged: SFP/SFP+/SFP28 10G Base-SR (LC)
	vendor: UBNT PN: UF-MM-1G SN: FT19110214937 DATE: 2019-11-02
	module temperature: 27.18 C Voltage: 3.23 Volts
	RX: 0.37 mW (-4.27 dBm) TX: 0.29 mW (-5.34 dBm)

	SFF8472 DUMP (0xA0 0..127 range):
	03 04 07 10 00 00 00 40 40 0C 55 06 67 00 00 00 
	37 37 00 00 55 42 4E 54 20 20 20 20 20 20 20 20 
	20 20 20 20 00 00 00 00 55 46 2D 4D 4D 2D 31 47 
	20 20 20 20 20 20 20 20 20 20 20 20 03 52 00 6F 
	00 0A 00 00 46 54 31 39 31 31 30 32 31 34 39 33 
	37 20 20 20 31 39 31 31 30 32 00 00 68 90 01 61 
	20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 
	20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=81009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,VLAN_HWFILTER>
	ether f8:75:a4:88:a7:b3
	inet6 fe80::fa75:a4ff:fe88:a7b3%em0 prefixlen 64 scopeid 0x3
	inet6 2605:e000:7fc0:71:a0a1:eb1d:67ad:b073 prefixlen 128
	inet 76.91.240.192 netmask 0xfffff000 broadcast 255.255.255.255
	media: Ethernet autoselect (1000baseT <full-duplex>)
	status: active
	nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
enc0: flags=0<> metric 0 mtu 1536
	groups: enc
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
	inet 127.0.0.1 netmask 0xff000000
	groups: lo
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
pflog0: flags=100<PROMISC> metric 0 mtu 33160
	groups: pflog
pfsync0: flags=0<> metric 0 mtu 1500
	groups: pfsync
            1 Reply Last reply Reply Quote 0
            • stephenw10S
              stephenw10 Netgate Administrator
              last edited by

              Hmm, and that doesn't offer a 1G fixed mode if you run ifconfig -vvvm ix1 ?

              M 1 Reply Last reply Reply Quote 0
              • M
                moosport @stephenw10
                last edited by

                @stephenw10
                Here is the output. I have a spare Mellanox ConnectX-3 which I test if this card do not support it.

                [2.6.0-RELEASE][pfSense.local]/root: ifconfig -vvm ix1
ix1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	description: OPT1
	options=e138bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,RXCSUM_IPV6,TXCSUM_IPV6>
	capabilities=f53fbb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,NETMAP,RXCSUM_IPV6,TXCSUM_IPV6>
	ether 0c:c4:7a:1f:81:67
	inet6 fe80::ec4:7aff:fe1f:8167%ix1 prefixlen 64 scopeid 0x2
	inet 192.168.20.1 netmask 0xffffff00 broadcast 192.168.20.255
	media: Ethernet autoselect
	status: no carrier
	supported media:
		media autoselect
		media 10Gbase-SR
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	plugged: SFP/SFP+/SFP28 10G Base-SR (LC)
	vendor: UBNT PN: UF-MM-1G SN: FT19110214937 DATE: 2019-11-02
	module temperature: 27.18 C Voltage: 3.23 Volts
	RX: 0.37 mW (-4.27 dBm) TX: 0.28 mW (-5.41 dBm)
                1 Reply Last reply Reply Quote 0
                • stephenw10S
                  stephenw10 Netgate Administrator
                  last edited by

                  Hmm, yeah something weird happening there. That's not a 10G module, it shouldn't be offering 10Gbase-SR as a link type.

                  M 1 Reply Last reply Reply Quote 0
                  • M
                    moosport @stephenw10
                    last edited by

                    @stephenw10
                    This is the modules installed. It worked fine for SFP ports.

                    [Unifi 1Gbps modules ](Ubiquiti U Fiber Multi-Mode SFP... https://www.amazon.com/dp/B01MY5498F?ref=ppx_pop_mob_ap_share)

                    1 Reply Last reply Reply Quote 0
                    • stephenw10S
                      stephenw10 Netgate Administrator
                      last edited by

                      Right, it's a 1G module but the NIC sees it as 10G and tries to use it as such for some reason.

                      I haven't seen that before, I'm not sure what could be done there.

                      Try it i the Mellanox NIC and see what it reports there. Though I will say those ConnectX-3 NICs have always behaved oddly for me.

                      Steve

                      M 1 Reply Last reply Reply Quote 0
                      • M
                        moosport @stephenw10
                        last edited by

                        @stephenw10

                        Tested using Ubuntu Live ISO. Initially both DAC and Unifi module did not work.

                        So I swap out the Unifi module of the router with a spare and it works immediately.

                        1 Reply Last reply Reply Quote 0
                        • stephenw10S
                          stephenw10 Netgate Administrator
                          last edited by

                          But still not in pfSense?

                          M 1 Reply Last reply Reply Quote 0
                          • M
                            moosport @stephenw10
                            last edited by

                            @stephenw10
                            Pfsense sees it now. Sorry I forget to mentioned it.

                            Now I’m trying to figure out how to make wireless devices see the printer, unifi cloud key and HomeKit hub from the other subnet.

                            1 Reply Last reply Reply Quote 0
                            • stephenw10S
                              stephenw10 Netgate Administrator
                              last edited by

                              The best way to do that is to just use the IP directly. However I imagine you might have some devices that need to 'discover' those resources and have no option to enter an IP directly. If that's the case you might need something to proxy that discovery traffic like Avahi.

                              Steve

                              M 1 Reply Last reply Reply Quote 0
                              • M
                                moosport @stephenw10
                                last edited by

                                @stephenw10
                                Will give it a try when I get some time. For now, first step of moving pfsense to bare metal is done.

                                Thanks Stephen!

                                1 Reply Last reply Reply Quote 1
                                • First post
                                  Last post
                                Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.