Enabling Multiple Subnets to Communicate
-
First off apologies if this is not the right place to ask this and secondly if it has already been covered in a past forum post. However I am unable to find a definitive answer to a issue I am trying to resolve.
My scenario thus far, I have my computer running on a hardwired subnet of 192.168.55.0/24, I have my APs running on a subnet of 10.0.20.0/24. The problem I am running into is in order for me to communicate with anything on the 10.0.20.0 subnet I have to enable the wireless on my PC before being able to communicate with anything on that subnet. How would I go about allowing the traffic to pass through both subnets?
As I am new to the PFsense platform I apologize about such a benign and rookie question, any and all help in this would be very greatly appreciated. Any detailed steps would be a tremendous help. Thank you again. -
@s3v3nd34dly51ns the LAN interface by default has an allow all rule. Other interfaces do not do default to deny all. What rules are on 192.168.55.0/24? Does the wireless device to which you’re trying to connect allow 192.168.55.0/24 in its firewall?