problem with tracking id log. It never changes

charneval

My version is :
2.6.0-RELEASE (amd64)
built on Mon Jan 31 19:57:53 UTC 2022
FreeBSD 12.3-STABLE

But I've had this problem for about 1 month and the firmware version has been around for about 5 months.

johnpoz

@gertjan said in problem with tracking id log. It never changes:

there was an issue with "firewall & track IDs".

Wasn't there an issue with copy of firewall rules not creating new IDs - I don't recall an issue with non-existing IDs being logged..

viragomann

@johnpoz
Anyway never seen such a high rule ID number. So if it was not generated by a certain package, I suspect, there must be something went pretty wrong at the rule generation.

To resolve, I would try to export the config, search for this rule ID in it. If it isn't there, reinstall pfSense and import the config again and hope, that the issue doesn't come back.

charneval

I exported the configuration and inside I can't find any id with number: 4294967295, now I'll try to restore the configuration on a different hardware and see if I'm carrying the log problem.

Thanks

bmeeks

@charneval said in problem with tracking id log. It never changes:

I can't find any id with number: 4294967295

That particular number is special. It is the decimal representation of the largest unsigned integer that will fit within a 32-bit word (when expressed in binary). See here: https://en.wikipedia.org/wiki/4,294,967,295. So, my guess is an integer variable is corrupted or overflowed. I don't have a guess as to why, though.

charneval

Hi.
For a test I force a reinstall of all packages using pkg upgrade -fy
but after the reboot I can't open the web consolle.
In ssh the firewall responds and works properly.

How can I restore access via web page?

viragomann

@charneval
Troubleshooting Access when Locked Out of the Firewall

Disable the filter, then login in and check the rules.

charneval

@viragomann
I'm connecting remotely to the firewall via ssh and I don't want this operation to give me later problems so I prefer to do it on site.
The firewall has many rules and many client at the moment connected.
Currently I don't know if reconfiguring the packages solved my logging problem but I will try to check as soon as possible.

stephenw10

That. And also try restating php then the webgui from the menu.

charneval

I solved the problem by reinstalling the firewall with version 2.6.0 and reloading an old backup.
But I realized that the package reinstall solution ( pkg upgrade -fy ) solved the log problem but blocked me from accessing the web page.
Thanks.