Gateway Latency Alarms
-
Hi All!
Ive got a Netgate 1541 connected to a ATT Fiber gateway setup in IP passthrough mode.
Im seeing alot of connectivity drops on my network, and see the following entries in the gateway logs within pfsense.
Any help in chasing down this issue would be appreciated.
I currently have Disable Gateway Monitoring Action enabled on all of my gateway routes. Also, there is a Netgate XS505M in between the Netgate appliance WAN port and the ATT Fiber gateway, due to the fact that the ATT gateway will only link at 5gbps max and the netgate box only supports 100/1000/10gig.
Mar 27 11:21:07 dpinger 3828 send_interval 500ms loss_interval 2000ms time_period 60000ms report_interval 0ms data_len 1 alert_interval 1000ms latency_alarm 500ms loss_alarm 20% dest_addr 192.168.1.254 bind_addr 76.226.xxx.142 identifier "WANGW " Mar 27 11:21:07 dpinger 4138 send_interval 500ms loss_interval 2000ms time_period 60000ms report_interval 0ms data_len 1 alert_interval 1000ms latency_alarm 500ms loss_alarm 20% dest_addr fe80::xxxx:xxxx:xxxx:xxxx%ix0 bind_addr fe80::xxxx:xxxx:xxxx:xxxx%ix0 identifier "WAN_DHCP6 " Mar 27 11:23:00 dpinger 4138 exiting on signal 15 Mar 27 11:23:00 dpinger 3828 exiting on signal 15 Mar 27 11:49:26 dpinger 31455 send_interval 500ms loss_interval 2000ms time_period 60000ms report_interval 0ms data_len 1 alert_interval 1000ms latency_alarm 500ms loss_alarm 20% dest_addr 76.226.xxx.1 bind_addr 76.226.xxx.xxx identifier "WAN_DHCP " Mar 27 11:49:26 dpinger 31878 send_interval 500ms loss_interval 2000ms time_period 60000ms report_interval 0ms data_len 1 alert_interval 1000ms latency_alarm 500ms loss_alarm 20% dest_addr fe80::xxxx:xxxx:xxxx:xxxx%ix0 bind_addr fe80::xxxx:xxxx:xxxx:xxxx%ix0 identifier "WAN_DHCP6 " -
@dtnb Simply means the path to your monitor IP or maybe the monitor IP itself is not healthy.
edit: I see the monitor IP is 192.168.1.254 which is your ATT modem in this case. Perhaps a cabling problem? Have you tried swapping the patch cable?