23.01 install results in no internet
-
@puneet1984 said in 23.01 install results in no internet:
what commands to put in for MSR and cpuctl?
I don't know, it's not something I've ever had to try. Those links you posted above seem to list the registers used by the throttling though.
-
thanks for the help...
i am a not technical guy and trying to setup a home lab for my self as a hobby...
hope some one in the forum will know the know-how and might help..Also regarding the WAN disconnection from the remote side do you have any idea why this is happening or what i can do more to diagnose the problem.
because the WAN is not working, i am unable to upgrade to 23.01 and thus i am not able to install any packages in 22.05...
i am really in a fix...dont know what to do next.
i am afraid that if i do a fresh clean install of 2.6 CE and then upgrade it to 23.01 the issue might persist and i will be wasting a whole lot of hours and gaining nothing.
i think netgate should not discontinue older versions and their package support atleast for like 3-4 months after releasing a new version, so that guys like me can alteast enjoy using the pfsense on older versions when newer versions do have unexplainable bugs.also my IP still banned from the community...please ask the IT incharge to look into it.. netgate should not ban legitimate ISP ip range.
-
That IP range is in a subnet that's blocked because it's a source of mostly spam. I'm not sure we can exclude individual IPs within that.
You can continue to use 22.05 for some time. The pkg repos will remain available.
Steve
-
I'm having a similar issue with PPPOE after updating to 23.01, the link comes up and then mpd5 dies... The log seems to show that a second instance of mpd5 is being started, which sends a kill signal to the previous one and take over from it. This process then repeats indefinitely.
Mar 28 22:32:18 FW1 ppp[7408]: [opt5] IPCP: LayerUp Mar 28 22:32:18 FW1 ppp[7408]: [opt5] XXX -> XXX Mar 28 22:32:20 FW1 ppp[66496]: Multi-link PPP daemon for FreeBSD Mar 28 22:32:20 FW1 ppp[66496]: Mar 28 22:32:20 FW1 ppp[66496]: process 66496 started, version 5.9 Mar 28 22:32:20 FW1 ppp[66496]: waiting for process 7408 to die... Mar 28 22:32:20 FW1 ppp[7408]: caught fatal signal TERM Mar 28 22:32:20 FW1 ppp[7408]: [opt5] IFACE: Close event Mar 28 22:32:20 FW1 ppp[7408]: [opt5] IPCP: Close event``` -
@puneet1984 Use IPv6 on Jio, less likely to be recycled address space or shared CGNAT space, so less likely to be on existing blacklists.
-
Is there anything in the main system log starting that?
It's not quite the same issue. OP's log here shows the terminate received via LCP and yours doesn't?
-
@stephenw10 Not that i've seen, i had to revert to 22.05 to get back online.. Is it possible to mount the alternative bootenv to retrieve the logs?
-
Not dircetly that I'm aware of, you'd need to boot into it.
-
@stephenw10 what am i thinking.. i have a syslog server.
It seems to spawn rc.newwanip for pppoe0, then 2 seconds later a new instance of mpd5 is spawned which kills the old one:Mar 28 22:32:55 FW1 charon[26243]: 11[KNL] x.x.x.x appeared on pppoe0 Mar 28 22:32:55 FW1 check_reload_status[388]: rc.newwanip starting pppoe0 Mar 28 22:32:56 FW1 dpinger[37838]: exiting on signal 15 Mar 28 22:32:56 FW1 dpinger[37566]: exiting on signal 15 Mar 28 22:32:56 FW1 check_reload_status[388]: Configuring interface opt5 Mar 28 22:32:57 FW1 dpinger[38249]: exiting on signal 15 Mar 28 22:32:57 FW1 dpinger[36458]: exiting on signal 15 Mar 28 22:32:57 FW1 dpinger[35464]: exiting on signal 15 Mar 28 22:32:57 FW1 dpinger[12865]: send_interval 500ms loss_interval 2000ms time_period 60000ms report_interval 0ms data_len 1 alert_interval 1000ms latency_alarm 500ms loss_alarm 20% dest_addr fe80::a66c:2aff:fe77:3300%pppoe0 bind_addr fe80::ec4:7aff:fe19:898c%pppoe0 identifier "WAND_DHCP6 " Mar 28 22:32:57 FW1 dpinger[13165]: send_interval 500ms loss_interval 2000ms time_period 60000ms report_interval 0ms data_len 1 alert_interval 1000ms latency_alarm 500ms loss_alarm 20% dest_addr 2001:XXX::73 bind_addr 2001:XXX::240 identifier "RTFW " Mar 28 22:32:57 FW1 dpinger[13674]: send_interval 500ms loss_interval 2000ms time_period 60000ms report_interval 0ms data_len 1 alert_interval 1000ms latency_alarm 500ms loss_alarm 20% dest_addr 2001:XXX::6464 bind_addr 2001:XXX::240 identifier "Jool " Mar 28 22:32:57 FW1 dpinger[14103]: send_interval 500ms loss_interval 2000ms time_period 60000ms report_interval 0ms data_len 1 alert_interval 1000ms latency_alarm 500ms loss_alarm 20% dest_addr 2001:XXX::777 bind_addr 2001:XXX::240 identifier "CISCO_3750 " Mar 28 22:32:57 FW1 dpinger[14579]: send_interval 500ms loss_interval 2000ms time_period 60000ms report_interval 0ms data_len 1 alert_interval 1000ms latency_alarm 500ms loss_alarm 20% dest_addr 2001:XXX::100 bind_addr 2001:4d48:ad57:40a::240 identifier "LIABFW " Mar 28 22:32:57 FW1 dhcp6c[40213]: Sending Information Request Mar 28 22:32:57 FW1 dhcp6c[40213]: set client ID (len 10) Mar 28 22:32:57 FW1 dhcp6c[40213]: set elapsed time (len 2) Mar 28 22:32:57 FW1 dhcp6c[40213]: send information request to ff02::1:2%pppoe0 Mar 28 22:32:57 FW1 dhcp6c[40213]: reset a timer on pppoe0, state=INFOREQ, timeo=2, retrans=3617 Mar 28 22:32:57 FW1 charon[26243]: 16[KNL] XXX disappeared from pppoe0 Mar 28 22:32:57 FW1 ppp[20529]: Multi-link PPP daemon for FreeBSD Mar 28 22:32:57 FW1 ppp[20529]: Mar 28 22:32:57 FW1 ppp[20529]: process 20529 started, version 5.9 Mar 28 22:32:57 FW1 ppp[20529]: waiting for process 50355 to die...``` -
Seems like a race condition. What's opt5? How is it configured?
-
@stephenw10 opt5 is the pppoe interface, config is a little convoluted...
There is a wan interface (igb2) which is connected to a switch, there is a tagged vlan interface (igb2 vlan 80), then there is a carp vip on that interface with the ppp session bound to it for failover.
Taking the backup firewall offline and binding pppoe directly to igb2.80 made no difference.ppp configuration is mostly default - username, password, null service name, mtu set to 1500 to use baby jumbo frames.
Interface configured legacy ip using pppoe, and then dhcpv6 for ipv6 with a /56 prefix delegation set to "information only" as it's static and i don't need to dynamically apply it to other interfaces.
-
Hmm, that should be OK. Though technically PPPoE is not supported in HA.
How is igb2 configured? In that sort of setup I would want to see it only static or no IP.
-
@stephenw10 no ip on igb2..
The HA with PPPoE works well with 22.05 and earlier versions. -
Hmm, is igb2 assigned/enabled?
-
@stephenw10 yeah igb2 is assigned and active.
The same config works with 22.05, performing an upgrade to 23.01 with no config changes triggers the problem.
The logs show the PPP session coming up, and then a second instance of mpd5 is spawned which causes the first one to terminate.
It seems mpd5 is always started with the -k option:
-k, --kill Kill running mpd process before start
just trying to work out why a second instance is getting spawned... -
Yes, something is causing that and my hunch is that it's because igb2 is assigned such that the vlan and pppoe subinterfaces are being restarted.
Is there any reason igb2 is assigned? Can you unassign it as a test? -
@stephenw10 It's just assigned as WAN with no IP configuration...
I will give it another try tonight, i'm working from home and this device controls the connection so can't take it down during the day. -
Right but it doesn't need to be assigned. And by having it assigned will mean that a bunch more scripts get triggered when the VLAN or PPPoE link on the VLAN get bounced.
-
@stephenw10 unassigning the parent interface made no difference, still the endless loop of connecting and killing mpd5..
-
Hmm, and this happens at the first time it tries to connect? Or at the first reconnect?
