Pfsense doesn't see a specific network
-
Hi community,
I need help with my network.
I am in the AD domain, and I have many networks without VLAN.
Actually, I use pfsense to rotate all traffic on a determinate network to my internal network, but I've got a problem only on a specific subnet.My pfsense won't visualize on this network, but the network sees this IP if I put the same IP on another machine (in a domain or not). I don't understand this problem, I've seen attention to the Rules, and I have a few rules that block the traffic.
DC/DNS = 192.168.1.10 / GW = 192.168.1.1
Network A: 192.168.0.0/27 / GW = 192.168.0.1
Network B: 192.168.0.32/27 / GW = 192.168.0.33Internal Network = 192.168.2.0/24
Pfsense = 192.168.1.2
GW = 192.168.1.1Pfsense -> Internal Network | Internal Network -> Pfsense
Actually, I am on switch core on the same DC network.
On pfsense with this configuration, I see all network and the traffic rotate correctly on the internal network, but my pfsense don't see the IP of Network B or vice versa, while if I disconnect the IP 192.168.1.2 on Pfsense and I put this IP on another machine's (on domain or not), I see the Network B in outbound and inbound, why? Do I have to put specific rules on pfsense? This happens only with Network B.