realtek-re-kmod missing in pfSense 2.6 repository?

goovich

@bepa888 any updates?

bepa888

@goovich Ever since I installed the realtek-re-kmod driver version 197.00 25 days ago, there has been no flapping on either the LAN or WAN Realtek ports. Yay!

goovich

@bepa888 thank you for the update! Hope my Zbox CI323 nano will stop locking/hanging.

HaskyCrawford

@xenium1024 i'm same erro in 196 197 and 198 repo!

stephenw10

In 2.6? Do this: https://forum.netgate.com/post/1100295

HaskyCrawford

@stephenw10 Hello Good morning from Brazil!
Thanks, but after this configuration my pfsense broken :\

image url)

I access to pfsense and its see you crash report, but i don't now how add here my log .tar

HaskyCrawford

@stephenw10 i post in gist.github

https://gist.github.com/haskycrawford/f69722c7cdb9a02c2c87e1798d665307

stephenw10

Hmm, not a crash I'm familiar with. It did load the driver correctly though.

Is that part of an HA pair? The crash is in pfSync:

db:0:kdb.enter.default>  bt
Tracing pid 12 tid 100115 td 0xfffff800058a0740
kdb_enter() at kdb_enter+0x37/frame 0xfffffe008702c5f0
vpanic() at vpanic+0x197/frame 0xfffffe008702c640
panic() at panic+0x43/frame 0xfffffe008702c6a0
trap_fatal() at trap_fatal+0x391/frame 0xfffffe008702c700
trap_pfault() at trap_pfault+0x4f/frame 0xfffffe008702c750
trap() at trap+0x286/frame 0xfffffe008702c860
calltrap() at calltrap+0x8/frame 0xfffffe008702c860
--- trap 0xc, rip = 0xffffffff8109a0c6, rsp = 0xfffffe008702c930, rbp = 0xfffffe008702c950 ---
pfsync_state_export() at pfsync_state_export+0x26/frame 0xfffffe008702c950
pfsync_sendout() at pfsync_sendout+0x280/frame 0xfffffe008702ca00
pfsyncintr() at pfsyncintr+0xd1/frame 0xfffffe008702ca50
ithread_loop() at ithread_loop+0x23c/frame 0xfffffe008702cab0
fork_exit() at fork_exit+0x7e/frame 0xfffffe008702caf0
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008702caf0
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---

Dobby_

@haskycrawford

Here it begins....

<118>Setting up gateway monitors...


Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address	= 0x0
fault code		= supervisor read data, page not present
instruction pointer	= 0x20:0xffffffff8109a0c6
stack pointer	        = 0x28:0xfffffe008702c930
frame pointer	        = 0x28:0xfffffe008702c950
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 12 (swi1: pfsync)
trap number		= 12
panic: page fault
cpuid = 0
time = 1682586946
KDB: enter: panic

And that may be the point were it struggles about.

fault virtual address	= 0x0
fault code		= supervisor read data, page not present

HaskyCrawford

@stephenw10 i don't have a HA pfsense, i have 3 network cards 2 WAN and 1 LAN all Realtek 8111.

stephenw10

Hmm, OK. Since you have a screenshot does that mean it did boot correctly after that? Or did you roll back the driver to get that?