Can't access web-UI after upgrade from 2.7 to Plus 23.01
-
Maybe just bad timing on my part but I got me a VPS the other day and am installing pfSense 2.7 on it. After doing the upgrade to plus, I can't access the web-ui anymore. The VPS only has one NIC.
Can I force an upgrade to the latest RC of 23.05 via ssh?
-
When I am trying going from 2.6 to 23.01 on that VPS, I get an "unable to check for updates" just for the upgrade, all other updates are available. Maybe I used an already used token?
Maybe @stephenw10 has an idea.
Also I can't install any packages.
-
The VPS only has one NIC.
Make this NIC being the LAN interface and set up the
WebGui to it.Can I force an upgrade to the latest RC of 23.05 via ssh?
You can try out that but if you have a physical contact to
that server you may try out serial console also. -
@dobby_ said in Can't access web-UI after upgrade from 2.7 to Plus 23.01:
Make this NIC being the LAN interface and set up the
WebGui to it.That is all done but as a WAN-interface, wireguard is the LAN.
Still there are problems with doing the upgrade.
-
from 2.6 to 23.01
If you have done this to often wait a while and try it again
the cert. lease time is gone! So if you try it again
later it should be running.from 2.7 to 23.01
There is a PHP version mismatch due to different PHP
versions in the both installations.I am running 2.7 Devel and can update and upgrade
but only for 2.7 and so I wait until the both versions
will be coming with the same PHP version in it.From 2.6 to 23.01 and then to 23.05 was running only
nice with a fresh install of 2.6 and then upgrade and upgrade once more again, and then installing all packets!But as today this might be the best option for me.
-
@bob-dig said in Can't access web-UI after upgrade from 2.7 to Plus 23.01:
Maybe just bad timing on my part but I got me a VPS the other day and am installing pfSense 2.7 on it. After doing the upgrade to plus, I can't access the web-ui anymore. The VPS only has one NIC.
Can I force an upgrade to the latest RC of 23.05 via ssh?
@stephenw10 said in HELP! pfSense is dead after upgrade to plus:
Like you went from CE 2.7 to Plus 23.01?
That's not valid unless it was a 2.7 snapshot from Feb 15th or earlier because of the php change. You should be able to recover by running a full forced pkg reinstall if that is what you did.
https://docs.netgate.com/pfsense/en/latest/troubleshooting/upgrades.html#forced-pkg-reinstall -
J jimp moved this topic from Problems Installing or Upgrading pfSense Software on
