23.01 -> 23.05 upgrade failed

[pete]

Backed up my PFSense 23.01 version fine. Updated and it failed. Rebooted box and it wouldn't boot in to PFSense.

Installed new PFSense CE on the box. Got a new token for PFSense + and see this

Thank you for choosing Netgate pfSense. Your device does not require registration, we recognize it already. You may have already registered, or it may be a pre-registered Netgate appliance.

when I try registration

I should have read the forum before upgrading.

I am using PFSense now with CE release 2.6.0-RELEASE (amd64) and restored backup from PFSense 23.01. (which is wrong and seeing this on boot up)

So this morning installing PFSense CE on backup router and hopefully updating it with PFSense + and then restoring configuration.

Never had an issue like this.

[SteveITS]

@pete I don’t have a solution but I’ve seen other posts like that. I believe that means Netgate recognizes the calculated NDI and therefore you don’t need a new token. Maybe you can find a thread with the solution…

[pete]

@SteveITS

Thank you @SteveITS.

Plugged Backup PFSense CE to currently working LAN (on kitchen table - very low on the WAF).

Updated it to PFSense +. It is updating now to 23.01 and leaving it there and restoring backup from other machine.

On reboot it gets all sorts of PHP errors and stays at the login prompt. Rebooted a couple of times and it is the same on reboot. I am screwed right now.

It seemed to stall at the squid prompts. Removed squid package and it booted. Reset the box via command prompt. Restored old build. On reboot dbended on kernel load.

Will start again from scratch on back up box.

Once I get this one going then taking primary off line and redoing it hopefully to work fine.

I am retired and this is a hobby and while I have backup boxes here many folks do not.

Need to step away now and readdress issues this afternoon.

[Dobby_]

@pete

You could try out installing 2.6 (zfs) and then upgrading to 23.01 and once more to 23.05
and if you will be install also back the config
then it would be the best option in my eyes.
You will need perhaps 30 minutes and all is
fine again. For the spare box I would try out
the 2.7 Development, if it is only a spare box
and for home usage and on top a hobby you
will be fine with it.

[pete]

Thank-you @dobby.

I did that and it worked and I did not update but when I restored my PFSense + old configuration it debended.

The second time I did it it said it was registered and wouldn't update to PFSense +.

So now booting in Ubuntu and reformatting drive and trying installation again.

This is on a Qotom. I also have two Jetways which I like much better than Qotom which I may try on.

In my retirement now hoarding firewalls ;).

I am still running on the redone Qotom PFSense + box to PFSense CE with the PFSense + backup restored to it. My VPN servers are running fine.

Just that I am occupying the kitchen table with a monitor and another server which is very low on the WAF.

[mark_lab_user]

@Dobby_ I just finished that exact procedure. All the way back to fresh 2.6 and then the 2 steps to upgrade.

I had to do it because "Available packages" was showing as empty and I was getting an error is syslog relating to the package manager.

And then I also had to update the RTL Ethernet driver to get my 2.5 Gbit card working.

But...

php-fpm[396]: /pkg_mgr_installed.php: The command '/usr/local/sbin/pfSense-repo-setup' returned exit code '1', the output was 'pfSense-repoc-static: invalid signature failed to read the repo data. failed to update the repository settings!!!'

Has returned as of a few minutes ago.

Hmmm.

[mark_lab_user]

@mark_lab_user Oh, silly me, I forget to Register using my existing Token.

Now things are looking up.

Guess that explains the 'invalid signature'?

[Dobby_]

@pete said in 23.01 -> 23.05 upgrade failed:

In my retirement now hoarding firewalls ;).

1 pfSense+
1 pfSense Devel
1 OpenWRT (comes later)
1 RouterOS (On the way)

[tman222]

@mark_lab_user said in 23.01 -> 23.05 upgrade failed:

@mark_lab_user Oh, silly me, I forget to Register using my existing Token.

Now things are looking up.

Guess that explains the 'invalid signature'?

@mark_lab_user - I have been seeing the same error but was already registered for pfSense Plus when I saw it.

https://forum.netgate.com/topic/180382/unable-to-install-or-upgrade-packages

Are you saying that the invalid signature error went away as soon as you registered your pfSense Plus activation token?

[mark_lab_user]

@tman222 YES.

[pete]

Formatting the drive did not fix the registration error.

I see this on the registration page where I put the token in for PFSense+

Thank you for choosing Netgate pfSense

Your device does not require registration, we recognize it already. You may have already registered, or it may be a pre-registered Netgate appliance.

Well then I read this:

*@jarhead ***There was a discussion a month or two ago that touched on it... I seem to recall pfSense generates a hardware ID and if the hardware changes it is seen as different/new. So without changing something, you probably would need to contact Netgate as mentioned.

Yeah, there's no automated process to do that currently. So open a ticket if for any reason you need to.****

That is why I could not re-install PFSense + on original machine and now second test machine. So now trying new Jetway computer. So will open up a TAC request for machines that were registered with PFSense.

Yes here have been using a micro travel router (2" X 1"" running OpenWRT and a MQTT broker inside my alarm panel (OmniPro 2). Another one is running MeteoHub with a MeteoStick for my Davis Weather station. Well and another one is a wireless TOR box.
Well also running Kodi in my automobiles and using Openwrt to LTE modems. Really like KODI CoreElec which talks to the bus on the car. It shows up as a menu item.

So installed PFSense then PFSense + on the new Jetway (6 Gb ports / com port / vga). Next steps are to recover my backup. This is where when I tried last time to do this the computer failed to boot.

Netgate pfSense Plus - Netgate Device ID: 3

*** Welcome to Netgate pfSense Plus 23.01-RELEASE (amd64) on pfSense ***

 WAN (wan)       -> igb0       -> v4/DHCP4: 192.168.244.251/25
                                  v6/DHCP6: xxx/64
 LAN (lan)       -> igb1       -> v4: 192.168.1.1/24

 0) Logout (SSH only)                  9) pfTop
 1) Assign Interfaces                 10) Filter Logs
 2) Set interface(s) IP address       11) Restart webConfigurator
 3) Reset webConfigurator password    12) PHP shell + Netgate pfSense Plus tools
 4) Reset to factory defaults         13) Update from console
 5) Reboot system                     14) Disable Secure Shell (sshd)
 6) Halt system                       15) Restore recent configuration
 7) Ping host                         16) Restart PHP-FPM
 8) Shell

Enter an option:

[driise]

@driise @jimp

I went through the process of promoting my secondary firewall to the master, then formatted the physical server (Dell R210 II), reinstalled pfSense 2.6 CE -> upgraded to pfSense+ (23.01), attempted the 23.05 upgraded again, and have the exact same issue. No packages installed or configuration beyond WAN and LAN IPs done on fresh install

It would seem that either my license/token has an issue (since it auto-discovered it after install, I wasn't able to use a new token) or there's just something wrong with the upgrade packages that get downloaded.

[23.01-RELEASE][admin@pfsense-a.home.arpa]/conf: pfSense-upgrade -d
>>> Updating repositories metadata...
Updating pfSense-core repository catalogue...
Fetching meta.conf: . done
Fetching packagesite.pkg: . done
Processing entries: .. done
pfSense-core repository update completed. 15 packages processed.
Updating pfSense repository catalogue...
Fetching meta.conf: . done
Fetching packagesite.pkg: .......... done
Processing entries:
Processing entries............. done
pfSense repository update completed. 549 packages processed.
All repositories are up to date.
>>> Upgrading pfSense-upgrade...
Updating pfSense-core repository catalogue...
pfSense-core repository is up to date.
Updating pfSense repository catalogue...
pfSense repository is up to date.
All repositories are up to date.
The following 1 package(s) will be affected (of 0 checked):

Installed packages to be UPGRADED:
	pfSense-upgrade: 1.0_61 -> 1.0_66 [pfSense]

Number of packages to be upgraded: 1

20 KiB to be downloaded.
[1/1] Fetching pfSense-upgrade-1.0_66.pkg: ... done
Checking integrity... done (0 conflicting)
[1/1] Upgrading pfSense-upgrade from 1.0_61 to 1.0_66...
[1/1] Extracting pfSense-upgrade-1.0_66: ...... done
pkg-static: No package(s) matching pfSense-pkg-*
pfSense-repoc-static: si_get_packages: failed to run the pkg info command: /usr/local/sbin/pkg-static info -R --raw-format json-compact pfSense-pkg-\*
pfSense-repoc-static: no pfSense packages installed
pfSense-repoc-static: invalid signature
failed to read the repo data.
failed to update the repository settings!!!
failed to update the repository settings!!!

[driise]

@driise

List of packages:

[23.01-RELEASE][admin@pfsense-a.home.arpa]/root: /usr/local/sbin/pkg-static info -a

[23.01-RELEASE][admin@pfsense-a.home.arpa]/root: /usr/local/sbin/pkg-static info -a
beep-1.0_1                     Beeps a certain duration and pitch out of the PC Speaker
bind-tools-9.18.8              Command line tools from BIND: delv, dig, host, nslookup...
bsnmp-regex-0.6_2              bsnmpd module allowing creation of counters from log files
bsnmp-ucd-0.4.5                bsnmpd module that implements parts of UCD-SNMP-MIB
bwi-firmware-kmod-3.130.20     Broadcom AirForce IEEE 802.11 Firmware Kernel Module
ca_root_nss-3.83               Root certificate bundle from the Mozilla Project
ccid-1.5.0                     Generic driver for USB CCID and ICCD
check_reload_status-0.0.14     run various pfSense scripts on event.
choparp-20150613               Simple proxy arp daemon
cpdup-1.22                     Comprehensive filesystem mirroring and backup program
cpustats-0.1_1                 cpustats
curl-7.85.0                    Command line tool and library for transferring data with URLs
cyrus-sasl-2.1.28              RFC 2222 SASL (Simple Authentication and Security Layer)
dbus-1.14.4,1                  Message bus system for inter-application communication
devcpu-data-20221002           AMD and Intel CPUs microcode updates
devcpu-data-amd-20221002       AMD CPUs microcode updates
devcpu-data-intel-20220809     Intel CPU microcode updates
dhcp6-20080615.2_4             KAME DHCP6 client, server, and relay
dhcpleases-0.5_1               read dhpcd.lease file and add it to hosts file
dhcpleases6-0.1_3              read dhpcd6.leases file and trigger command on modification
dmidecode-3.4_2                Tool for dumping DMI (SMBIOS) contents in human-readable format
dnsmasq-2.87,1                 Lightweight DNS forwarder, DHCP, and TFTP server
dpinger-3.2                    IP device monitoring tool
expat-2.4.9                    XML 1.0 parser written in C
expiretable-0.6_2              Utility to remove entries from the pf(4) table based on their age
filterdns-2.2                  filterdns
filterlog-0.1_9                filterlog
gettext-runtime-0.21           GNU gettext runtime libraries and programs
glib-2.74.0,2                  Some useful routines of C programming (current stable version)
hostapd-2.10_5                 IEEE 802.11 AP, IEEE 802.1X/WPA/WPA2/EAP/RADIUS Authenticator
icu-72.1,1                     International Components for Unicode (from IBM)
iftop-1.0.p4                   Display bandwidth usage on an interface by host
igmpproxy-0.3_1,1              Multicast forwarding IGMP proxy
indexinfo-0.3.1                Utility to regenerate the GNU info page index
ipmitool-1.8.18_3              CLI to manage IPMI systems
isc-dhcp44-client-4.4.3P1      The ISC Dynamic Host Configuration Protocol client
isc-dhcp44-relay-4.4.3P1       The ISC Dynamic Host Configuration Protocol relay
isc-dhcp44-server-4.4.3P1      ISC Dynamic Host Configuration Protocol server
json-c-0.16                    JSON (JavaScript Object Notation) implementation in C
ldns-1.8.3                     Library for programs conforming to DNS RFCs and drafts
libargon2-20190702             Memory hard password hashing program and library
libedit-3.1.20210910,1         Command line editor library
libevent-2.1.12                API for executing callback functions on events or timeouts
libffi-3.4.3                   Foreign Function Interface
libgcrypt-1.9.4_1              General purpose cryptographic library based on the code from GnuPG
libgpg-error-1.45              Common error values for all GnuPG components
libiconv-1.17                  Character set conversion library
libidn2-2.3.3_1                Implementation of IDNA2008 internationalized domain names
libinotify-20211018            Kevent based inotify compatible library
libltdl-2.4.7                  System independent dlopen wrapper
liblz4-1.9.4,1                 LZ4 compression library, lossless and very fast
libmcrypt-2.5.8_3              Multi-cipher cryptographic library (used in PHP)
libnghttp2-1.48.0              HTTP/2.0 C Library
libpsl-0.21.1_6                C library to handle the Public Suffix List
libsodium-1.0.18               Library to build higher-level cryptographic tools
libssh2-1.10.0,3               Library implementing the SSH2 protocol
libucl-0.8.1                   Universal configuration library parser
libunistring-1.1               Unicode string library
libuv-1.44.2                   Multi-platform support library with a focus on asynchronous I/O
libxml2-2.10.3_1               XML parser library for GNOME
libxslt-1.1.37                 XML stylesheet transformation library
links-2.28,1                   Lynx-like text WWW browser
lua-resty-core-0.1.23          New FFI-based Lua API for OpenResty NGINX Lua modules
lua-resty-lrucache-0.13        Lua-land LRU cache based on the LuaJIT FFI
luajit-openresty-2.1.20220915  Just-In-Time Compiler for Lua (OpenResty branch)
lzo2-2.10_1                    Portable speedy, lossless data compression library
minicron-0.0.2                 very small cron
miniupnpd-2.2.1_1,1            UPnP IGD implementation which uses pf/ipf
mobile-broadband-provider-info-20220725 Service mobile broadband provider database
mpd5-5.9_12                    Multi-link PPP daemon based on netgraph(4)
mpdecimal-2.5.1                C/C++ arbitrary precision decimal floating point libraries
nginx-1.22.0_9,3               Robust and small WWW server
nss_ldap-1.265_14              RFC 2307 NSS module
ntp-4.2.8p15_5                 The Network Time Protocol Distribution
oniguruma-6.9.8_1              Regular expressions library compatible with POSIX/GNU/Perl
openldap26-client-2.6.3        Open source LDAP client implementation
opensc-0.22.0                  Libraries and utilities to access smart cards
openvpn-2.6.0_13               Secure IP/Ethernet tunnel daemon
openvpn-auth-script-1.0.0.3    Generic script-based deferred auth plugin for OpenVPN
pam_ldap-186_1                 PAM module for authenticating with LDAP
pam_mkhomedir-0.2              Create HOME with a PAM module on demand
pcre-8.45_2                    Perl Compatible Regular Expressions library
pcre2-10.40                    Perl Compatible Regular Expressions library, version 2
pcsc-lite-1.9.5,2              Middleware library to access a smart card using SCard API (PC/SC)
perl5-5.32.1_3                 Practical Extraction and Report Language
pfSense-23.01                  Meta package to install pfSense required ports
pfSense-Status_Monitoring-1.8  pfSense Status Monitoring
pfSense-base-23.01             pfSense core files
pfSense-boot-23.01             pfSense boot files
pfSense-default-config-23.01   pfSense default config
pfSense-kernel-pfSense-23.01   pfSense kernel (pfSense)
pfSense-rc-23.01               pfSense rc script and rc.initial shell
pfSense-repo-23.01             Setup pfSense pkg(8) repositories
pfSense-repoc-20230523         pfSense dynamic repository client
pfSense-upgrade-1.0_66         pfSense upgrade script
pftop-0.8                      Utility for real-time display of statistics for pf
php81-8.1.11                   PHP Scripting Language (8.1.X branch)
php81-bcmath-8.1.11            The bcmath shared extension for php
php81-bz2-8.1.11               The bz2 shared extension for php
php81-ctype-8.1.11             The ctype shared extension for php
php81-curl-8.1.11              The curl shared extension for php
php81-dom-8.1.11               The dom shared extension for php
php81-filter-8.1.11            The filter shared extension for php
php81-gettext-8.1.11           The gettext shared extension for php
php81-intl-8.1.11_1            The intl shared extension for php
php81-ldap-8.1.11              The ldap shared extension for php
php81-libbe-0.1.4.1            FreeBSD libbe(3) library glue extension for PHP
php81-mbstring-8.1.11          The mbstring shared extension for php
php81-opcache-8.1.11           The opcache shared extension for php
php81-openssl_x509_crl-1.3_1   PHP Class to create openssl Certificate Revocation List (CRL)
php81-pcntl-8.1.11             The pcntl shared extension for php
php81-pdo-8.1.11               The pdo shared extension for php
php81-pdo_sqlite-8.1.11        The pdo_sqlite shared extension for php
php81-pear-1.10.13             PEAR framework for PHP
php81-pear-Auth_RADIUS-1.1.0_4 PEAR wrapper classes for the RADIUS PECL
php81-pear-Cache_Lite-1.8.3,1  Fast and Safe little cache system
php81-pear-Crypt_CHAP-1.5.0_2  PEAR class for generating CHAP packets
php81-pear-HTTP_Request2-2.5.1,1 PEAR classes providing an easy way to perform HTTP requests
php81-pear-Mail-1.4.1,1        PEAR class that provides multiple interfaces for sending emails
php81-pear-Net_IPv6-1.3.0.b4_2 Check and validate IPv6 addresses
php81-pear-Net_SMTP-1.10.1     PEAR class that provides an implementation of the SMTP protocol
php81-pear-Net_Socket-1.2.2    PEAR Network Socket Interface
php81-pear-Net_URL2-2.2.1      PEAR Class for parsing and handling URL
php81-pear-XML_RPC2-1.1.5      XML-RPC client/server library
php81-pecl-mcrypt-1.0.5        PHP extension for mcrypt, removed in PHP 7.2
php81-pecl-radius-1.4.0b1_2    Radius client library for PHP
php81-pecl-rrd-2.0.3           PHP bindings to rrd tool system
php81-pfSense-module-0.91      Library for getting useful info
php81-phpseclib-2.0.17         PHP arbitrary-precision integer arithmetic library
php81-posix-8.1.11             The posix shared extension for php
php81-readline-8.1.11          The readline shared extension for php
php81-session-8.1.11           The session shared extension for php
php81-shmop-8.1.11             The shmop shared extension for php
php81-simplexml-8.1.11         The simplexml shared extension for php
php81-sockets-8.1.11           The sockets shared extension for php
php81-sqlite3-8.1.11           The sqlite3 shared extension for php
php81-sysvmsg-8.1.11           The sysvmsg shared extension for php
php81-sysvsem-8.1.11           The sysvsem shared extension for php
php81-sysvshm-8.1.11           The sysvshm shared extension for php
php81-tokenizer-8.1.11         The tokenizer shared extension for php
php81-xml-8.1.11               The xml shared extension for php
php81-xmlreader-8.1.11         The xmlreader shared extension for php
php81-xmlwriter-8.1.11         The xmlwriter shared extension for php
php81-zlib-8.1.11              The zlib shared extension for php
pkg-1.19.1_1                   Package manager
py39-libzfs-1.1.2022081600     Python libzfs bindings
py39-setuptools-63.1.0         Python packages installer
python311-3.11.1_1             Interpreted object-oriented programming language
python39-3.9.16                Interpreted object-oriented programming language
qstats-0.2                     read dhpcd.lease file and add it to hosts file
radvd-2.19_2                   Linux/BSD IPv6 router advertisement daemon
rate-0.9_2                     Traffic analysis command-line utility
readline-8.1.2                 Library for editing command lines as they are typed
rrdtool-1.8.0_1                Round Robin Database Tools
scponly-4.8.20110526_5         Tiny shell that only permits scp and sftp
smartmontools-7.3              S.M.A.R.T. disk monitoring tools
sqlite3-3.39.3_1,1             SQL database engine in a C library
ssh_tunnel_shell-0.2_1         SSH tunnel shell
sshguard-2.4.2_2,1             Protect hosts from brute-force attacks against SSH and other services
strongswan-5.9.8               Open Source IKEv2 IPsec-based VPN solution
uclcmd-0.1_3                   Command line tool for working with UCL config files
unbound-1.17.1_2               Validating, recursive, and caching DNS resolver
voucher-0.1_2                  Voucher support
vstr-1.0.15_1                  General purpose string library for C
whois-5.5.7                    Marco d'Itri whois client
wol-0.7.1_4                    Tool to wake up Wake-On-LAN compliant computers
wpa_supplicant-2.10_6          Supplicant (client) for WPA/802.1x protocols
wrapalixresetbutton-0.0.13     Utility to detect platform reset button state for use in scripting
xinetd-2.3.15_2                Replacement for inetd with better control and logging
zstd-1.5.2_1                   Fast real-time compression algorithm

[driise]

@driise said in 23.01 -> 23.05 upgrade failed:

pfSense-upgrade-1.0_66

more info:

GUI set to 23.01 branch

[23.01-RELEASE][admin@pfSense.home.arpa]/usr/local/etc: pkg info -l pfSense-upgrade
pfSense-upgrade-1.0_61:
	/usr/local/libexec/pfSense-upgrade
	/usr/local/pfSense/include/Netgate/repos/pfSense-update-repos.inc.php
	/usr/local/sbin/pfSense-update-repos.php
	/usr/local/sbin/pfSense-upgrade
	/usr/local/share/licenses/pfSense-upgrade-1.0_61/APACHE20
	/usr/local/share/licenses/pfSense-upgrade-1.0_61/LICENSE
	/usr/local/share/licenses/pfSense-upgrade-1.0_61/catalog.mk
[23.01-RELEASE][admin@pfSense.home.arpa]/usr/local/etc:

GUI set to 23.05 branch

[23.01-RELEASE][admin@pfSense.home.arpa]/usr/local/etc: pkg info -l pfSense-upgrade
ld-elf.so.1: /usr/local/sbin/pkg: Undefined symbol "__libc_start1@FBSD_1.7"
[23.01-RELEASE][admin@pfSense.home.arpa]/usr/local/etc:

/usr/local/sbin/pkg* files from 23.05
(note different file sizes from the _61 files which are from 23.01

[23.01-RELEASE][admin@pfSense.home.arpa]/usr/local/etc: ls -al /usr/local/sbin/pkg*
-rwxr-xr-x  1 root  wheel   2917568 May 23 12:56 /usr/local/sbin/pkg
-rwxr-xr-x  1 root  wheel  28860304 May 23 12:56 /usr/local/sbin/pkg-static
-rwxr-xr-x  1 root  wheel  29087192 Jan  7 13:49 /usr/local/sbin/pkg-static.pkgsave
-rwxr-xr-x  1 root  wheel  29127216 May 28 10:08 /usr/local/sbin/pkg-static_61
-rwxr-xr-x  1 root  wheel   2912880 May 28 10:05 /usr/local/sbin/pkg_61

[pete]

A recap and what I see this morning on master PFSense box.

1 - PFSense 23.01 was running fine last week. On notification of update to 23.05 backed it up.
2 - updated box and update failed.
3 - box did not reboot - debend.
4 - Installed 2.6.0-RELEASE on box and used back up from PFSense 23.01. It worked with errors and currently running.
5 - Tried to register box with new token to update box to PFSense 23.01 and got a message that box is already registered.
6 - This morning Mon, May 29, 23 got a new message to update.

2.6.0-RELEASE (amd64)
built on Mon Jan 31 19:57:53 UTC 2022
FreeBSD 12.3-STABLE
Version 23.01 is available. 
Version information updated at Mon May 29 6:09:08 CDT 2023

So should I back up and try to update?

Should I try to update via command line console?
or
Via update GUI?

[driise]

@pete

Think this means that it's old activation token was detected (same thing mine did when I re-installed). It will upgrade to 23.01 just fine. I'll bet a donut you'll have the same upgrade failure going to 23.05. It's odd, 23.05 worked on my VM (failed first time, worked second), but not my physical regardless what I try to do on it.

[pete]

@driise

Thank you. This is the original master PFSense box.

I am dependent on this box right now and the backup box is running fine but I have not restored the old configuration on it yet.

[Gertjan]

@pete said in 23.01 -> 23.05 upgrade failed:

This is the original master PFSense box

Next time :
Get the "soon to be previous firmware" (23.01 in this case) from Netgate using the TAC service.
If something goes wrong, no need to go all the way back to 2.6.0 .... As importing a future 23.01 config into an older 2.6.0 version is far from ideal.

This will kick in inverse Murphy's law : "if you have an easy way back, you won't need it"

Also : If you had 23.01,didn't you have ZFS ?

If the 23.05 isn't playing well for me, I can get back to 23.01 with one click :

Btw : to get ZFS, you need to re install ones from USB and select the ZFS partition scheme.

[pete]

@Gertjan

Get the "soon to be previous firmware" (23.01 in this case) from Netgate using the TAC service.
If something goes wrong, no need to go all the way back to 2.6.0 .... As importing a future 23.01 config into an older 2.6.0 version is far from ideal.

Thank you. I did not know I could get 23.01 from the TAC service. I did get a few errors relating to my 23.01 configuration restoral to the 2.6.0 build. It is still runing fine today though. I did build a new box a couple of days ago and upgraded it to 23.01 but I have not restored the old 23.01 back up to it yet. I did move the WAN connection on the new box from the LAN to a T-Mobile modem to give it a try.....bit slower.

If you had 23.01,didn't you have ZFS ?

Yes ZFS on the 23.01 build. Wondering if that was the issue when upgrading the first time to 23.05.

[Dobby_]

@pete said in 23.01 -> 23.05 upgrade failed:

5 - Tried to register box with new token to update box to PFSense 23.01 and got a message that box is already registered.

If no hardware changes were done, you
could use the old one again. I was
registering two PC Engines APU and
could use that token even again.

So should I back up and try to update?

I woudl try it, but in another way or order!

• 2.6 zfs fresh install
  no pkgs, config backup and system backup
• upgrade to 23.01 zfs
  no pkgs, config backup and system backup
• upgrade to 23.05 zfs

If all went fine for you, please create now a
new boot environment "2305fine install" or
what ever and then reboot. Now you install
the pkgs (but now latest version!) and then
you can begine to play in each one after
another one (backup). But if now something
goes wrong, you boot from the 2305failsafe
next time and get rid of all new installs! That
is saving your much time. If you have a config Backup, done step-by-step let us say for the
entire system, then all the rules then for all
you packages, you can play them back step
by step and will easily able to find out if a
failures occours what it was and when it
was occouring.

Should I try to update via command line console?

Definitely YES, each of mine were upgraded
and updated only via console, sorry I was not mentioned it before. (Above thread)

Via update GUI?

No! Please, don´t get me wrong here but
I personally would not do that!