Best way to monitor when a device connects and disconnects to network?

heper

@Slyke you could reduce the time devices stay in the arp cache.

in shell you could reduce from 1200seconds to for example 120 seconds...

sysctl net.link.ether.inet.max_age=120

this will not survive a reboot, but should be good for testing.

johnpoz

@Slyke said in Best way to monitor when a device connects and disconnects to network?:

want to monitor when a device connects and disconnects to the network

Just because the arp cache has expired, doesn't mean the device is still not on the network. Just that pfsense has not seen any traffic from it.. I could be busy moving data between it and your nas for example..

if you want to know if something is on the network or not, you prob want to do an actual arp scan every X amount of time you are wanting resolution at, be that 1 minute, 1 hour, etc.

While something might not answer a ping, it would answer a arp.

Slyke

@heper What's the best way to make it permanent? Also, are there any issues with doing this? ARP packets are small, and I can't find any valid reason that decreasing this timeout would cause any issues, except maybe slightly more LAN traffic, which isn't really a problem.

@johnpoz Yeah, not too worried about if some devices aren't detected, like my smart switches or whatever, it's mainly my phone and gf's phone for presence detection, possibly for guests (friends) too. For something like a NAS, I could always ping it, and for smart switches, they reply to http requests (Being Shellys) and pings.

guile

@Slyke Maybe DHCP leases?

JKnott

@guile

You'd need fairly short leases for that to work. A lease is valid until it expires and that has nothing to do with a device leaving the network.

johnpoz

@guile dhcp leases for what? While a device getting a lease for sure could tell you when something joins. There is nothing saying its going to release it when it leaves - especially with wifi devices. They just end up out of range and connect to either cell or another wifi network. Unlike a pc or laptop that might be shutdown and release the dhcp lease as it shutdown, etc..

The best way to monitor close to real time what is on the network and what not on the network is to do a arp scan, and send out notifications for what your interested in.

I use to do using https://www.domotz.com/ which is pretty slick, but the pricing got out of hand for home user - it use to be like 20$ a year or something for a home license - now its like 23 a month.. No thanks.. Fing is the non pro version.. But think its limited to network.

You might be able to do some arp monitoring with zabbix - hmm I think there was a thread around here somewhere were somebody did something with that. Or maybe that was over on reddit? But there is no reason to re-invent the wheel here, sure that is something already done for this.. Be it free as in beer or with some cost.

guile

@johnpoz I use Zabbix, but he said some devices wont reply to ping.. and prob cant install zabbix agent.

johnpoz

@guile any device will answer arp - use arp scan..

Something like this maybe?

https://github.com/rggassner/gassnerZabbixScripts/tree/master/arpMonitoring

Or something like this maybe

https://github.com/pucherot/Pi.Alert

not a lot of reason to re-invent wheels, if you think of doing X, someone has prob already thought of it and created something ;)

Slyke

@johnpoz I agree reinventing the wheel is not a good idea, but I don't need a fully fledged app installed. I really just need to execute a script (really a mqtt or http request) when these events happens.

I tried getting dhcpd to use its execute() function, but since it's chrooted, cURL or wget need to be statically compiled, or all the libraries cURL or wget need, need to be moved into the chrooted environment. Even after statically compiling them, there were errors that were above my paygrade to solve. So I checked pfsense's source code to see how it determined if a host was online or offline and found that it was executing /usr/sbin/arp in one of the files.

I also found arpwatch, but it sends the alerts via email for some reason instead of allowing me to execute a shell script for it to run.

So far the best solution I've found is to setup a cronjob that runs every minute, create lockfile, execute /usr/sbin/arp use cURL to send the results somewhere, wait 5 seconds and do it again, until 55 seconds have passed then delete lockfile, then exit. I don't even need the host running pfsense to even diff the ARP changes, I just need to be able to see what's there and I can diff it elsewhere (Which will be NodeRed).

Pi.Alert does look nice, and I might set it up on my K8s cluster for more advanced monitoring.

Here's the (untested - GPT4 helped write it) script:

#!/bin/bash

LOCKFILE="/tmp/arpmonitor.lock"
OUTPUT_FILE="/tmp/arpmonitor_output.json"
URL="http://w.x.y.z/abc?123=456"
MAX_LOOPS=15
MAX_TIME=55
WAIT_BETWEEN_LOOPS=5

if [ -e "${LOCKFILE}" ]; then
  echo "Lockfile exists, exiting..."
  exit 1
fi

touch "${LOCKFILE}"
START=$(date +%s)
echo "${START}" > "${LOCKFILE}"

LOOP_COUNT=0
while [ $LOOP_COUNT -lt $MAX_LOOPS ] && [ $LOOP_COUNT -ge 0 ]; do
  NOW=$(date +%s)
  DIFF=$(( $NOW - $START ))

  if [ $DIFF -ge $MAX_TIME ]; then
    echo "${MAX_TIME} seconds passed, exiting..."
    rm -f "${LOCKFILE}"
    exit 0
  fi
  OUTPUT=$(/usr/sbin/arp --libxo json -a)

  echo "${OUTPUT}" > "${OUTPUT_FILE}" # for debugging

  curl -X POST -H "Content-Type: application/json" -d "${OUTPUT}" ${URL} --connect-timeout 3

  LOOP_COUNT=$((LOOP_COUNT+1))
  sleep $WAIT_BETWEEN_LOOPS
done

echo "Loop failed to correctly break (Loops: ${LOOP_COUNT}). Exiting..."
exit 2

Slyke

Final reply to this thread for anyone in the future who needs to setup something similar:

I've put the full solution, including the NodeRed flow here: https://gist.github.com/Slyke/7d5b290f1d5695fdd79f5e0a08837c93