Negate 1100 booting into SOC Boot loader menu.

dco

Re: netgate sg1100 not booting after power outage

I'm seeing the same SOC Boot Loader menu as described in the thread above. Is there instructions for loading an image anywhere? Otherwise, my Negate 1100 is bricked.

h/? - print this help screen 
r yyyyyyyy - read register/memory at address yyyyyyyy in hex 
w yyyyyyyy zzzzzzzz - write zzzzzzzz to address yyyyyyyy in hex 
j yyyyyyyy - jump to address yyyyyyyy in hex 
x y - change the boot mode, where y is in hex 
a - UART control passed to AP CPU ROM 
c - UART control passed to CM3 CPU ROM
>

Thanks for any help.

rcoleman-netgate

@dco said in Negate 1100 booting into SOC Boot loader menu.:

Thanks for any help.

Did you read the last post on the thread?
https://forum.netgate.com/topic/175625/netgate-sg1100-not-booting-after-power-outage/7?_=1690926793509

dco

@rcoleman-netgate said in Negate 1100 booting into SOC Boot loader menu.:

https://forum.netgate.com/topic/175625/netgate-sg1100-not-booting-after-power-outage/7?_=1690926793509

Thanks for the fast response. Yes, I read that message:

To give you an idea of what's involved the procedure for the standard Espressobin is shown here:
http://wiki.espressobin.net/tiki-index.php?page=Bootloader+recovery+via+UART

It wasn't clear if this was the instructions to follow to solve the issue or just an example of the sort of process that needs to be followed. It would be nice if there were instructions like this to recover the NetGate 1100. I'm capable of following those instructions, but want to be sure it is correct for the device I have.

stephenw10

We have some instructions for doing it. Open a ticket with us: https://www.netgate.com/tac-support-request

Steve

dco

@stephenw10 said in Negate 1100 booting into SOC Boot loader menu.:

Steve

Thanks a ticket has been submitted