Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    IPv6 Issues since upgrading

    Scheduled Pinned Locked Moved General pfSense Questions
    59 Posts 6 Posters 10.6k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • gregeehG
      gregeeh @stephenw10
      last edited by

      @stephenw10 said in IPv6 Issues since upgrading:

      Did you also disable router advertisements on the LAN? That needs to be enabled.

      Is this what you mean?

      alt text

      PfSense running on Qotom mini PC
      CPU N3150, 2 GB memory, 32 GB SSD & 2 Realtek Gb Ethernet ports.
      UniFi AC-Lite access point

      1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by

        Yes. Try enabling the dhcpv6 server again though.

        gregeehG P 2 Replies Last reply Reply Quote 0
        • gregeehG
          gregeeh @stephenw10
          last edited by

          @stephenw10 - That has done the trick, many thanks. I never thought about enabling the DHCPv6 Server as my ISP, and others I've seen, said to keep it disabled. Here's an extract from what my ISP says:

          22. Go to Services, DHCPv6 Server & RA

23. Make sure on the first page (DHCPv6 server) the box is unticked – you do not want to enable the DHCPv6 server on the LAN.

24. Select the router advertisements tab on that page.

25. Change router mode to: Assisted – RA Flags [managed, other stateful], Prefix Flags...

26. Router priory set to Normal (it should already be preset to that – if not, change it to normal).

27. Leave everything else on that page blank.

          PfSense running on Qotom mini PC
          CPU N3150, 2 GB memory, 32 GB SSD & 2 Realtek Gb Ethernet ports.
          UniFi AC-Lite access point

          1 Reply Last reply Reply Quote 0
          • P
            poppadum @poppadum
            last edited by poppadum

            @poppadum said in IPv6 Issues since upgrading:

            The gateway IPv6 address shown doesn't seem to be valid for interface pppoe0:

            I'm not sure where it's getting that gateway address from - it's set to dynamic in the web interface.

            After a bit more investigation I've discovered that the default gateway address pfSense is picking up is actually at my ISP's end and is correct.

            My problem seems to be exactly the same as @jordanp123 has: pfSense is not adding a default ipv6 route:

            [2.7.0-RELEASE][admin@pfSense]/root: route -6 get default
route: route has not been found

            My ISP uses PPPoE so I can temporarily fix it with route -6 add default -interface pppoe0
            But if my PPP connection drops it loses the default route again.

            Looking at the output of /etc/rc.newwanipv6 when I rebooted pfSense I'm seeing a few Gateway, NONE AVAILABLE errors:

            Aug  2 10:12:39 pfSense php-fpm[368]: /rc.newwanipv6: rc.newwanipv6: Info: starting on pppoe0.
Aug  2 10:12:39 pfSense php-fpm[368]: /rc.newwanipv6: rc.newwanipv6: on (IP address: 2001:8b0:1111:1111:0:ffff:51bb:1aef) (interface: wan) (real interface: pppoe0).
Aug  2 10:12:39 pfSense php-fpm[368]: /rc.newwanipv6: Removing static route for monitor 2001:8b0:1111:1111:0:ffff:51bb:1aef and adding a new route through dynamic
Aug  2 10:12:39 pfSense check_reload_status[406]: rc.newwanipv6 starting pppoe0
Aug  2 10:12:40 pfSense php-fpm[86171]: /rc.newwanipv6: rc.newwanipv6: Info: starting on pppoe0.
Aug  2 10:12:40 pfSense php-fpm[86171]: /rc.newwanipv6: rc.newwanipv6: on (IP address: 2001:8b0:1111:1111:0:ffff:51bb:1aef) (interface: wan) (real interface: pppoe0).
Aug  2 10:12:40 pfSense php-fpm[86171]: /rc.newwanipv6: Removing static route for monitor 2001:8b0:1111:1111:0:ffff:51bb:1aef and adding a new route through fe80::203:97ff:feba:900%pppoe0
Aug  2 10:12:41 pfSense php-fpm[86171]: /rc.newwanipv6: dpinger: status socket /var/run/dpinger_WAN_DHCP6~c91b75a6~2001:8b0:1111:1111:0:ffff:51bb:1aef.sock not found
Aug  2 10:12:41 pfSense php-fpm[86171]: /rc.newwanipv6: dpinger: status socket /var/run/dpinger_WAN_PPPOE~81.187.xxx.xxx~81.187.81.187.sock not found
Aug  2 10:12:41 pfSense php-fpm[86171]: /rc.newwanipv6: Gateway, none 'available' for inet, use the first one configured. 'WAN_PPPOE'
Aug  2 10:12:41 pfSense php-fpm[86171]: /rc.newwanipv6: Gateway, NONE AVAILABLE
Aug  2 10:12:41 pfSense php-fpm[368]: /rc.newwanipv6: The command '/usr/local/bin/dpinger -S -r 0 -i WAN_DHCP6 -B 2001:8b0:1111:1111:0:ffff:51bb:1aef -p /var/run/dpinger_WAN_DHCP6~c91b75a6~2001:8b0:1111:1111:0:ffff:51bb:1aef.pid -u /var/run/dpinger_WAN_DHCP6~c91b75a6~2001:8b0:1111:1111:0:ffff:51bb:1aef.sock -C "/etc/rc.gateway_alarm" -d 1 -s 500 -l 2000 -t 60000 -A 1000 -D 500 -L 20  2001:8b0:1111:1111:0:ffff:51bb:1aef >/dev/null' returned exit code '1', the output was ''
Aug  2 10:12:41 pfSense php-fpm[368]: /rc.newwanipv6: Error starting gateway monitor for WAN_DHCP6
Aug  2 10:12:42 pfSense php-fpm[368]: /rc.newwanipv6: Gateway, NONE AVAILABLE
Aug  2 10:12:42 pfSense php-fpm[368]: /rc.newwanipv6: Gateway, NONE AVAILABLE
Aug  2 10:12:43 pfSense php-fpm[86171]: /rc.newwanipv6: rc.newwanipv6: Info: starting on pppoe0.
Aug  2 10:12:43 pfSense php-fpm[86171]: /rc.newwanipv6: rc.newwanipv6: on (IP address: 2001:8b0:1111:1111:0:ffff:51bb:1aef) (interface: wan) (real interface: pppoe0).
Aug  2 10:12:43 pfSense php-fpm[86171]: /rc.newwanipv6: Removing static route for monitor 2001:8b0:1111:1111:0:ffff:51bb:1aef and adding a new route through fe80::203:97ff:feba:900%pppoe0
Aug  2 10:12:45 pfSense php-fpm[86171]: /rc.newwanipv6: Gateway, NONE AVAILABLE
Aug  2 10:12:45 pfSense php-fpm[86171]: /rc.newwanipv6: Gateway, NONE AVAILABLE

            Are these likely to be relevant?

            1 Reply Last reply Reply Quote 0
            • P
              poppadum @stephenw10
              last edited by poppadum

              @stephenw10 said in IPv6 Issues since upgrading:

              Try enabling the dhcpv6 server

              That doesn't fix the problem for me unfortunately

              1 Reply Last reply Reply Quote 0
              • stephenw10S
                stephenw10 Netgate Administrator
                last edited by

                Do you have the default v6 gateway set to WAN_DHCP6 in System > Routing?

                P 1 Reply Last reply Reply Quote 0
                • P
                  poppadum @stephenw10
                  last edited by

                  @stephenw10 said in IPv6 Issues since upgrading:

                  Do you have the default v6 gateway set to WAN_DHCP6 in System > Routing?

                  Both ipv4 & ipv6 gateways are set to automatic:

                  5dd1f9a3-8408-4185-b568-91abb85e98e4-image.png

                  1 Reply Last reply Reply Quote 0
                  • stephenw10S
                    stephenw10 Netgate Administrator
                    last edited by

                    Set them both to the specific gateways and retest. See if you still see those gateway log entries.

                    Though since you only have one valid v4 and v6 gateway it should work in automatic.

                    P 1 Reply Last reply Reply Quote 0
                    • P
                      poppadum @stephenw10
                      last edited by

                      @stephenw10 said in IPv6 Issues since upgrading:

                      Set them both to the specific gateways and retest. See if you still see those gateway log entries.

                      Ah yes, initial testing suggests that explicitly setting the ipv6 gateway to WAN_DHCP6 makes a difference. I now have a default route in place and LAN clients can ping the ipv6 internet.

                      There are indeed fewer mentions of the Gateway, NONE AVAILABLE error in the logs:

                      Aug  2 17:46:39 pfSense php-fpm[368]: /rc.newwanipv6: rc.newwanipv6: Info: starting on pppoe0.
Aug  2 17:46:39 pfSense php-fpm[368]: /rc.newwanipv6: rc.newwanipv6: on (IP address: 2001:8b0:1111:1111:0:ffff:51bb:1aef) (interface: wan) (real interface: pppoe0).
Aug  2 17:46:39 pfSense php-fpm[368]: /rc.newwanipv6: Removing static route for monitor 2001:8b0:1111:1111:0:ffff:51bb:1aef and adding a new route through dynamic
Aug  2 17:46:40 pfSense check_reload_status[406]: rc.newwanipv6 starting pppoe0
Aug  2 17:46:41 pfSense php-fpm[81388]: /rc.newwanipv6: rc.newwanipv6: Info: starting on pppoe0.
Aug  2 17:46:41 pfSense php-fpm[81388]: /rc.newwanipv6: rc.newwanipv6: on (IP address: 2001:8b0:1111:1111:0:ffff:51bb:1aef) (interface: wan) (real interface: pppoe0).
Aug  2 17:46:41 pfSense php-fpm[81388]: /rc.newwanipv6: Removing static route for monitor 2001:8b0:1111:1111:0:ffff:51bb:1aef and adding a new route through fe80::203:97ff:feba:900%pppoe0
Aug  2 17:46:41 pfSense php-fpm[368]: /rc.newwanipv6: dpinger: status socket /var/run/dpinger_WAN_DHCP6~c91b75a6~2001:8b0:1111:1111:0:ffff:51bb:1aef.sock not found
Aug  2 17:46:41 pfSense php-fpm[368]: /rc.newwanipv6: dpinger: No dpinger session running for gateway WAN_PPPOE
Aug  2 17:46:41 pfSense php-fpm[368]: /rc.newwanipv6: Gateway, none 'available' for inet, use the first one configured. 'WAN_PPPOE'
Aug  2 17:46:41 pfSense php-fpm[81388]: /rc.newwanipv6: dpinger: status socket /var/run/dpinger_WAN_DHCP6~c91b75a6~2001:8b0:1111:1111:0:ffff:51bb:1aef.sock not found
Aug  2 17:46:41 pfSense php-fpm[81388]: /rc.newwanipv6: dpinger: status socket /var/run/dpinger_WAN_PPPOE~81.187.xxx.xxx~81.187.81.187.sock not found
Aug  2 17:46:41 pfSense php-fpm[81388]: /rc.newwanipv6: Gateway, none 'available' for inet, use the first one configured. 'WAN_PPPOE'
Aug  2 17:46:42 pfSense php-fpm[368]: /rc.newwanipv6: rc.newwanipv6: Info: starting on pppoe0.
Aug  2 17:46:42 pfSense php-fpm[368]: /rc.newwanipv6: rc.newwanipv6: on (IP address: 2001:8b0:1111:1111:0:ffff:51bb:1aef) (interface: wan) (real interface: pppoe0).
Aug  2 17:46:42 pfSense php-fpm[368]: /rc.newwanipv6: Removing static route for monitor 2001:8b0:1111:1111:0:ffff:51bb:1aef and adding a new route through fe80::203:97ff:feba:900%pppoe0
Aug  2 17:46:44 pfSense php-fpm[368]: /rc.newwanipv6: Gateway, NONE AVAILABLE

                      @stephenw10 said in IPv6 Issues since upgrading:

                      Though since you only have one valid v4 and v6 gateway it should work in automatic.

                      Yes, both gateways set to automatic was working in v.2.6

                      1 Reply Last reply Reply Quote 0
                      • stephenw10S
                        stephenw10 Netgate Administrator
                        last edited by

                        Yes, something has changed there. Unclear what though. Still digging.

                        1 Reply Last reply Reply Quote 1
                        • First post
                          Last post
                        Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.