UDP/ICMP is not working after upgrade to 2.6.0

Cool_Corona

@pdschulz I didnt run CP on any interfaces and still no dice on 2.6

On 2.5.2 it works and runs happily

A Former User

I can confirm I had similar problems after upgrading to 2.6.0.
Setup: pfsense 2.6.0 with Unifi AP's and captive portal.

My first indication is that 3 different Mibox devices, running Android TV, came up with "internet connection problems". On the settings page I could see "connection, but no internet".

Most application on the mibox did not work, no amazon prime, no youtube, no vrtnu, ... BUT netflix worked.

Ipad and android phones did work however.
Linux / Windows laptops also seem to work.

On the Unifi Network Management Station I got "STUN" errors on the access points after the upgrade.

Disabling the captive portal and re-connecting the clients fixed the problems.
The STUN errors on Unifi also disappeared.

Gertjan

Read https://forum.netgate.com/topic/170300/new-system-patches-v2-0?_=1646343673426 - Apply patch (Redmine #12834) and case closed.

bepo

Maybe we should move discussion to the ticket only to prevent splitted information:
https://redmine.pfsense.org/issues/12834

I posted an update there. Its maybe still an issue with mac address bypasses.

Update: Its fixed. You have to reboot after applying the patch! Thanks for fixing :-)

stephenw10

Only the mac bypass? How are you applying that? Hosts behind the portal that should be able to connect without logging in?

bepo

@stephenw10 See my update. It was my fault not rebooting after patching. Thanks!

BENROFU

I have a netgate Sg1100 with 22.01 release. I use captive portal, and cannot get wifi-call.
I have changed state timeouts on UDP as suggested in other posts but no diffrence.
Could it be that my pfsense+ 22.01 equals to 2.6.0 you are referring to here?

I tried to upgrade my system firmware yesterday but with no sucess. I see a lot of other with same problem with upgrading.
Still awaiting link to a recover image from netgate. Re-installed and old recoveryfile and back in business, but without wifi calls...

Can someone please shed some light on this issue?

stephenw10

You need to apply the patch for captive portal in 22.01.

Or upgrade. How did it fail?

You will get the recovery image imminently though and installing 23.05.1 clean is probably a good idea if you have access and a backup config.

Steve

BENROFU

@stephenw10 Thanks for reply. I tried upgrade via webgui.

Never booted up again.

Connected serial and rebooted to this.

stephenw10

Ah, Ok. Yes that was a known bug back in 22.01. Easier to reinstall 23.05.1 clean and restore your config from there.

BENROFU

@stephenw10
Yes, but if i do understand correct i cant download firmware updated, i need to open ticket with netgate?

I assume i have to wait and see if i get a reply for the ticket i just opened.

thanks again

stephenw10

Yes. But I can see we replied to your ticket with a link ~30mins ago. (6mins after it was opened)

BENROFU

@stephenw10

Yes thanks! Just trying to install it now!

BENROFU

@BENROFU Perfect, with wifi calling