How to create static routing in Mikrotik for PfSense server?
-
Hello, how are you guys?
I need a little help, I recently started working with Router board, firewall, proxy in my company... And I had a demand to create a Proxy service authenticated with PfSense.
I created it using Squid Proxy Server, I made the basic configurations and it's working, so far... I also created a WPAD script and put it on the DHCP server (Mikrotik) to do an automatic configuration on the machines that are on the network and it's working normally...But my problem is that, when a user disables the automatic proxy option in the operating system, he bypasses the proxy server and browses normally without the proxy, and I'm trying to solve this problem, but in my company's scenario I'm having difficult, because as I said, I'm new to this software and I'm not getting it.
The current scenario is as follows... We have an RB (Mikrotik), where we receive the network from the internet provider (Port 1 (WAN) Mikrotik), there is a DHCP configuration, where it goes out through (Port 4 (LAN) Mikrotik) to a switch and after this switch there is this Pfsense server configured.
The PfSense server has only one network card, which is (LAN). I briefly read some forums to see if I could find something similar to my scenario, but I was unsuccessful, but I found some places with similar scenarios that indicated that I would have to do static routing in Mikrotik, but I don't know how can I do this correctly.
I would be very grateful if you could help me in this situation.
Thank you in advance for your attention, thank you very much!
-
@Raul-Teles
This might be the wrong place for asking this question.
You're probably looking for this in the RouterOS docs: Manual:IP/Proxy -
This post is deleted! -
@viragomann Thanks, I'll check the link.