Ping not working on CLI or with "default" interface on GUI

stephenw10

Ah, yes, I should have spotted that!

I guess I'd try disabling wireguard as a test. There's not much else it could be....

stephenw10

Hmm, do you have a Wireguard gateway defined?

Is your default IPv4 gateway still set to automatic in System > Routing > Gateways?
If it is try setting it to the WAN gateway.

llavecita

Hello again @stephenw10 . New day, new time to chase this mystery.

I have stopped WireGuard service, but issue still persists.

In regards to IPv4 gateway, it is not automatic - it is statically defined. It is the only Gateway in this system (no WireGuard gateways or anything extra), and it is also set as default. Puzzling.

I have tried to add a NAT outbound rule on top of the list, selecting "any" as source on WAN interface, and translating it to the "interface address", and ping works now when not specifying an interface. But this is a dirty patch, as I assume WAN is still sending the packets with 0.0.0.0 as source, just that we are translating that address locally. On top of that, nslookup still does not work even with that workaround, ie:

$ nslookup dns.google
;; UDP setup with 1.1.1.2#53(1.1.1.2) for dns.google failed: host unreachable.
;; UDP setup with 1.1.1.2#53(1.1.1.2) for dns.google failed: host unreachable.
;; UDP setup with 1.1.1.2#53(1.1.1.2) for dns.google failed: host unreachable.
;; UDP setup with 9.9.9.9#53(9.9.9.9) for dns.google failed: host unreachable.

And pfsense updates also don't work. So I am reverting that NAT outbound rule.

I will continue to chase it for a few hours more and, if no luck, I will try reinstalling the system and observe behaviour when freshly installed and no config.xml restores.

llavecita

Here is some additional info, in case it helps

$ ifconfig -a

igb0: flags=8822<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=4e527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6,NOMAP>
	ether 3c:ec:ef:a7:22:e8
	media: Ethernet autoselect
	status: no carrier
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>

igb1: flags=8822<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=4e527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6,NOMAP>
	ether 3c:ec:ef:a7:22:e9
	media: Ethernet autoselect
	status: no carrier
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>

ix0: flags=8863<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	description: WAN
	options=48138b8<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,NOMAP>
	ether 9c:69:b4:64:96:7a
	inet6 fe80::9e69:b4ff:fe64:967a%ix0 prefixlen 64 scopeid 0x3
	inet 123.123.123.123(redacted) netmask 0xffffff80 broadcast 123.123.123.1(redacted)
	media: Ethernet autoselect (10Gbase-SR <full-duplex,rxpause,txpause>)
	status: active
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>

ix1: flags=8863<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	description: OPT1
	options=48138b8<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,NOMAP>
	ether 9c:69:b4:64:96:7b
	inet6 fe80::9e69:b4ff:fe64:967b%ix1 prefixlen 64 scopeid 0x4
	media: Ethernet autoselect
	status: no carrier
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>

enc0: flags=0<> metric 0 mtu 1536
	groups: enc
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
	inet 127.0.0.1 netmask 0xff000000
	groups: lo
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>

pflog0: flags=100<PROMISC> metric 0 mtu 33152
	groups: pflog

pfsync0: flags=0<> metric 0 mtu 1500
	maxupd: 128 defer: off
	syncok: 1
	groups: pfsync

tun_wg0: flags=80c1<UP,RUNNING,NOARP,MULTICAST> metric 0 mtu 1420
	description: WG_EG
	options=80000<LINKSTATE>
	inet 80.80.80.1(redacted) netmask 0xffffff00
	inet 90.90.90.1(redacted) netmask 0xffffff00
	inet 10.95.32.99 netmask 0xffffff00
	groups: wg WireGuard
	nd6 options=101<PERFORMNUD,NO_DAD>

I also verified that in the uploaded .pcap file, the MAC address of the source matches the one in ix0 interface.

stephenw10

@llavecita said in Ping not working on CLI or with "default" interface on GUI:

inet 123.123.123.123(redacted) netmask 0xffffff80 broadcast 123.123.123.1(redacted)

Is that the other way around? I expect the broadcast address to be .127 on a /25.

llavecita

@stephenw10 I redacted the real values, but you are indeed correct - shown broadcast address in ifconfig for interface ix0 is a .127 (and gateway is a .126)

stephenw10

Hmm, OK. We discussed this internally last night and there's nothing immediately that presents like that.

Can I assume this behaviour survives a reboot?

llavecita

@stephenw10 Correct, the server has been rebooted several times to no avail. I will find some time today to reinstall it from scratch, without dragging any previous config.xml, to see if behaviour persists on a fresh install. I will report back later today.

Thanks again for your time and dedication!

stephenw10

Yeah, I really like to know what's causing that. Must be something very obscure as I see almost zero references to it.

llavecita

@stephenw10 I have just reinstalled the system, and zero-to-ping works well after disabling igb0/igb1, enabling ix0/ix1, and setting static IP and gateway for the relevant WAN interface. This means the problem lies in my restored config.xml, which seems to be breaking things although it comes from another functional system which is in production. The other system is virtualised, and not a dedicated environment, so I only changed "vtnet0" for "ix0" in the ported config.xml, but perhaps additional changes are needed.

I will try to restore a couple of config.xml's to see if results differ, and if it still breaks I will manually configure this system. It would be great to know the exact cause of the issue though!

Thanks again for your assistance and dedication. I will post again if I have additional findings which are relevant.

llavecita

@stephenw10 More wizardry. So, before reinstalling the system, I downloaded the config.xml. Now, after reinstalling it I restored exactly the same config.xml (no changes at all!), and now everything works: ping and nslookup, updates, etc. So I cannot confirm my config.xml was at fault!

The good thing is that everything works now, and no manual configuration is required (phew...). The bad side is that we do not know what was (seriously) wrong. But maybe instead of spending 3 days troubleshooting, next time I could try to reinstall first, and if the same result happens, then troubleshoot. A learning experience :D.

Thanks again!

stephenw10

Hmm, so something dynamic that survives a reboot but is not in the config.