SG-1100 Enter full pathname of shell or RETURN for /bin/sh:
-
I upgraded to test my SG-1100 and I am unable to boot after the upgrade. I have rolled back to the 23.05.1 boot environment so I am good on the device.
The serial log is below of the upgrade process.
System is going to be upgraded. Rebooting in 10 seconds. ovpnc1: link state changed to DOWN ath0: stuck beacon; resetting (bmiss count 64) Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 0 0 0 0 0 done All buffers synced. Uptime: 43m58s Khelp module "ertt" can't unload until its refcount▒TIM-1.0 WTMI-devel-18.12.1-1a13f2f WTMI: system early-init SVC REV: 5, CPU VDD voltage: 1.260V NOTICE: Booting Trusted Firmware NOTICE: BL1: v1.5(release):1f8ca7e-dirty (Marvell-devel-18.12.2) NOTICE: BL1: Built : 18:22:47, Oct 7 2021 NOTICE: BL1: Booting BL2 NOTICE: BL2: v1.5(release):1f8ca7e-dirty (Marvell-devel-18.12.2) NOTICE: BL2: Built : 18:22:52, Oct 7 2021 NOTICE: BL1: Booting BL31 NOTICE: BL31: v1.5(release):1f8ca7e-dirty (Marvell-devel-18.12.2) NOTICE: BL31: Built : 18 U-Boot 2018.03-devel-18.12.3-gc9aa92c-dirty (Oct 07 2021 - 18:20:55 -0300) Model: Netgate 1100 CPU 1200 [MHz] L2 800 [MHz] TClock 200 [MHz] DDR 750 [MHz] DRAM: 1 GiB Comphy chip #0: Comphy-0: USB3 5 Gbps Comphy-1: PEX0 2.5 Gbps Comphy-2: SATA0 6 Gbps SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode flags: ncq led only pmp fbss pio slum part sxs PCIE-0: Link up console comconsole failed to initialize Consoles: EFI console m SPI Flash... SF: Detected mx25u3235f with page size 256 Reading loader env vars from /efi/freebsd/loader.env Setting currdev to disk0p2: FreeBSD/arm64 EFI loader, Revision 1.1 /Fri Feb 10 20:26:39 UTC 2023 root@freebsd) Hit any key to stop autoboot: 0 Command line arguments: loader.efit! Image base: 0x7000000netgate-1100.dtb EFI version: 2.70720-sg1100.dtb EFI Firmware: Das U-Boot (rev 0.00)tb Console: efi,comconsole (0).dtb Load Path: /\armada-3720-sg1100.dtb Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(1)/eMMC(0)/HD(2,0x01,0,0x64001,0x1117c) Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(1)/eMMC(0)/HD(2,0x01,0,0x64001,0x1117c) ms (1.9 MiB/s) Setting currdev to disk0p2: at 07000000 ... Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(1)/eMMC(0)/HD(1,0x01,0,0x1,0x64000) sdhci@d0000.blk... Setting currdev to disk0p1:ady Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(1)/eMMC(0)/HD(3,0x01,0,0x7517d,0xe1ae83) Loading /boot/defaults/loader.confT/auto-default-20231023130019: Loading /boot/defaults/loader.conf Loading /boot/device.hints Loading /boot/loader.conf Loading /boot/loader.conf.local \ _ __ / _|___ ___ _ __ ___ ___ _ | '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \ _| |_ | |_) | _\__ \ __/ | | \__ \ __/ |_ _| | .__/|_| |___/\___|_| |_|___/\___| |_| |_| +---- Welcome to Netgate pfSense Plus ----+ __________________________ | | / ___\ | 1. Boot Multi user [Enter] | | /` | 2. Boot Single user | | / :-| | 3. Escape to loader prompt | | _________ ___/ /_ | | 4. Reboot | | /` ____ / /__ ___/ | | 5. Cons: Serial | | / / / / / / | | | | / /___/ / / / | | Options: | | / ______/ / / _ | | 6. Kernel: default/kernel (1 of 2) | |/ / / / _| |_ | | 7. Boot Options | / /___/ |_ _| | | 8. Boot Environments | / |_| | | | /_________________________/ +-----------------------------------------+ \ Autoboot in 0 seconds. [Space] to pause Loading kernel... /boot/kernel/kernel text=0x2a8 text=0xc20ed0 text=0x14574e4 data=0x171e58 data=0x0+0x2d2000 0x8+0x18c420+0x8+0x1a0634 Loading configured modules... can't find '/etc/hostid' /boot/kernel/zfs.ko text=0xaedb0 text=0x211820 data=0x2c7a0+0xaab6c 0x8+0x34b78+0x8+0x2de8e can't find '/boot/entropy' /boot/kernel/opensolaris.ko text=0x18d3 text=0x9fc data=0x4a0+0x1a030 0x8+0xfc0+0x8+0x88b Using DTB provided by EFI at 0x8000000. EFI framebuffer information: addr, size 0x0, 0x0 dimensions 0 x 0 stride 0 masks 0x00000000, 0x00000000, 0x00000000, 0x00000000 GDB: current port: uart KDB: debugger backends: ddb gdb KDB: current backend: ddb Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.0-CURRENT aarch64 1400094 #0 plus-RELENG_23_09-n256160-b373d8da4a4: Fri Oct 27 02:21:52 UTC 2023 root@freebsd:/var/jenkins/workspace/pfSense-Plus-snapshots-23_09-main/obj/aarch64/UgG4xxDl/var/jenkins/workspace/pfSense-Plus-snapshots-23_09-main/sources/FreeBSD-src-plus-RELENG_23_09/arm64.aarch64/sys/pfSense arm64 FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152) VT: init without driver. module scmi already present! real memory = 1073680384 (1023 MB) avail memory = 978403328 (933 MB) Starting CPU 1 (1) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. random: entropy device external interface ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xffff000000251810, 0) error 1 ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffff0000002518bc, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffff000000251968, 0) error 1 iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_bss_fw, 0xffff000000251a14, 0) error 1 iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffff000000251ac0, 0) error 1 wlan: mac acl policy registered iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffff000000251b6c, 0) error 1 kbd0 at kbdmux0 ofwbus0: <Open Firmware Device Tree> simplebus0: <Flattened device tree simple bus> on ofwbus0 simplebus1: <Flattened device tree simple bus> on simplebus0 ofw_firmware0: <OFW Firmware Group> on ofwbus0 simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0x13800-0x138ff,0x13c00-0x13c1f on simplebus1 simple_mfd1: <Simple MFD (Multi-Functions Device)> mem 0x18800-0x188ff,0x18c00-0x18c1f on simplebus1 psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 netgate0: <Netgate 1100> gic0: <ARM Generic Interrupt Controller v3.0> mem 0x1d00000-0x1d0ffff,0x1d40000-0x1d7ffff,0x1d80000-0x1d81fff,0x1d90000-0x1d91fff,0x1da0000-0x1dbffff irq 28 on simplebus1 gpio0: <Armada 37x0 North Bridge GPIO Controller> mem 0x13800-0x138ff,0x13c00-0x13c1f irq 29,30,31,32,33,34,35,36,37,38,39,40 on simple_mfd0 gpiobus0: <OFW GPIO bus> on gpio0 gpio1: <Armada 37x0 South Bridge GPIO Controller> mem 0x18800-0x188ff,0x18c00-0x18c1f irq 41,42,43,44,45 on simple_mfd1 gpiobus1: <OFW GPIO bus> on gpio1 gpioregulator0: <GPIO controlled regulator> on ofwbus0 a37x0-xtal0: <Marvell Armada 3700 Oscillator> mem 0x13800-0x138ff,0x13c00-0x13c1f on simple_mfd0 generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0 Timecounter "ARM MPCore Timecounter" frequency 12500000 Hz quality 1000 Event timer "ARM MPCore Eventtimer" frequency 12500000 Hz quality 1000 a37x0_tbg0: <Marvell Armada 3700 time base generators> mem 0x13200-0x132ff on simplebus1 a37x0_nb_periph_driver0: <marvell,armada-3700-nb-periph-clock> mem 0x13000-0x130ff on simplebus1 a37x0_sb_periph_driver0: <marvell,armada-3700-sb-periph-clock> mem 0x18000-0x180ff on simplebus1 cpulist0: <Open Firmware CPU Group> on ofwbus0 cpu0: <Open Firmware CPU> on cpulist0 pmu0: <Performance Monitoring Unit> irq 4 on ofwbus0 spi0: <Armada 37x0 SPI controller> mem 0x10600-0x10fff irq 6 on simplebus1 iichb0: <Marvell Armada 37x0 IIC controller> mem 0x11000-0x11023 irq 7 on simplebus1 iicbus0: <OFW I2C bus> on iichb0 iic0: <I2C generic I/O> on iicbus0 uart0: <Marvell Armada 3700 UART> mem 0x12000-0x12017 irq 9,10,11 on simplebus1 uart0: console (115200,n,8,1) gpioc0: <GPIO controller> on gpio0 gpioc1: <GPIO controller> on gpio1 mvneta0: <NETA controller> mem 0x30000-0x33fff irq 14 on simplebus1 mvneta0: version is 10 mdio0: <MDIO> on mvneta0 mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0 e6000sw0: <Marvell 88E6341> on mdio0 e6000sw0: multi-chip addressing mode (0x1) e6000sw0: CPU port at 0 e6000sw0: fixed port at 0 e6000sw0: PHY at port 1 miibus0: <MII bus> on e6000sw0 e1000phy0: <Marvell 88E1000 Gigabit PHY> PHY 17 on miibus0 e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto e6000sw0: PHY at port 2 miibus1: <MII bus> on e6000sw0 e1000phy1: <Marvell 88E1000 Gigabit PHY> PHY 18 on miibus1 e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto e6000sw0: PHY at port 3 miibus2: <MII bus> on e6000sw0 e1000phy2: <Marvell 88E1000 Gigabit PHY> PHY 19 on miibus2 e1000phy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto e6000sw0: switch is ready. etherswitch0: <Switch controller> on e6000sw0 mvneta0: Ethernet address: f0:ad:4e:08:6d:cc xhci0: <Generic USB 3.0 controller> mem 0x58000-0x5bfff irq 16 on simplebus1 xhci0: 32 bytes context size, 32-bit DMA usbus0 on xhci0 ehci0: <Marvell Integrated USB 2.0 controller> mem 0x5e000-0x5efff irq 17 on simplebus1 usbus1: EHCI version 1.0 usbus1 on ehci0 sdhci_xenon0: <Armada Xenon SDHCI controller> mem 0xd0000-0xd02ff,0x1e808-0x1e80b irq 25 on simplebus1 sdhci_xenon1: <Armada Xenon SDHCI controller> mem 0xd8000-0xd82ff,0x17808-0x1780b irq 26 on simplebus1 mmc0: <MMC/SD bus> on sdhci_xenon1 ahci0: <AHCI SATA controller> mem 0xe0000-0xe0177 irq 27 on simplebus1 ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with FBS ahcich0: <AHCI channel> at channel 0 on ahci0 device_attach: ahcich0 attach returned 6 pcib0: <Marvell Armada 3700 PCIe Bus Controller> mem 0xd0070000-0xd008ffff irq 5 on simplebus0 pcib0: link up pci0: <OFW PCI bus> on pcib0 ath0: <Atheros 9280> at device 0.0 on pci0 [ath] enabling AN_TOP2_FIXUP ath0: [HT] enabling HT modes ath0: [HT] 1 stream STBC receive enabled ath0: [HT] 1 stream STBC transmit enabled ath0: [HT] 2 RX streams; 2 TX streams ath0: AR9280 mac 128.2 RF5133 phy 13.0 ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 gpioled0: <GPIO LEDs> on ofwbus0 armv8crypto0: <AES-CBC,AES-XTS,AES-GCM> Timecounters tick every 1.000 msec mvneta0: link state changed to UP ZFS filesystem version: 5 ZFS storage pool version: features support (5000) usbus0: 5.0Gbps Super Speed USB v3.0 usbus1: 480Mbps High Speed USB v2.0 ugen1.1: <Marvell EHCI root HUB> at usbus1 uhub0 on usbus1 uhub0: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ugen0.1: <Generic XHCI root HUB> at usbus0 uhub1 on usbus0 uhub1: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 spibus0: <OFW SPI bus> on spi0 mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0 mx25l0: device type mx25u3235f, size 4096K in 64 sectors of 64K, erase size 4K mmc0: Failed to set VCCQ for card at relative address 2 mmcsd0: 8GB <MMCHC SEM08G 3.10 SN B1CB28BE MFG 04/2017 by 69 0x0000> at mmc0 50.0MHz/8bit/65535-block mmcsd0boot0: 2MB partition 1 at mmcsd0 mmcsd0boot1: 2MB partition 2 at mmcsd0 mmcsd0rpmb: 2MB partition 3 at mmcsd0 CPU 0: ARM Cortex-A53 r0p4 affinity: 0 Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL> Instruction Set Attributes 1 = <> Instruction Set Attributes 2 = <> Processor Features 0 = <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32> Processor Features 1 = <> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> Memory Model Features 1 = <8bit VMID> Memory Model Features 2 = <32bit CCIDX,48bit VA> Debug Features 0 = <DoubleLock,2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8> Debug Features 1 = <> Auxiliary Features 0 = <> Auxiliary Features 1 = <> AArch32 Instruction Set Attributes 5 = <CRC32,SHA2,SHA1,AES+VMULL,SEVL> AArch32 Media and VFP Features 0 = <FPRound,FPSqrt,FPDivide,DP VFPv3+v4,SP VFPv3+v4,AdvSIMD> AArch32 Media and VFP Features 1 = <SIMDFMAC,FPHP DP Conv,SIMDHP SP Conv,SIMDSP,SIMDInt,SIMDLS,FPDNaN,FPFtZ> CPU 1: ARM Cortex-A53 r0p4 affinity: 1 Release APs...Trying to mount root from zfs:pfSense/ROOT/auto-default-20231023130019 []... done TCP_ratelimit: Is now initialized e6000sw0port1: link state changed to DOWN e6000sw0port2: link state changed to UP e6000sw0port3: link state changed to UP uhub1: 2 ports with 2 removable, self powered uhub0: 1 port with 1 removable, self powered Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Warning: no time-of-day clock registered, system time will not be set accurately Configuring crash dumps... No suitable dump device was found. Filesystems are clean, continuing... Mounting filesystems... random: unblocking device. Mounting ZFS boot environment... done. Current time is older than key file time, using file time instead. __ _ __ / _|___ ___ _ __ ___ ___ _ | '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \ _| |_ | |_) | _\__ \ __/ | | \__ \ __/ |_ _| | .__/|_| |___/\___|_| |_|___/\___| |_| |_| Welcome to Netgate pfSense Plus 23.05.1-RELEASE... ...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/lib/engines /usr/local/lib/compat/pkg /usr/local/lib/ipsec /usr/local/lib/perl5/5.32/mach/CORE done. >>> Removing vital flag from php82... done. >>> Locking package pfSense-pkg-FTP_Client_Proxy... done. >>> Locking package pfSense-pkg-nmap... done. Removing pfSense-rc Checking integrity... done (0 conflicting) Deinstallation has been requested for the following 1 packages (of 0 packages in the universe): Installed packages to be REMOVED: pfSense-rc: 23.05.1 Number of packages to be removed: 1 [1/1] Deinstalling pfSense-rc-23.05.1... [1/1] Deleting files for pfSense-rc-23.05.1: 100% >>> Upgrading necessary core packages... Checking for upgrades (1 candidates): . done Processing candidates (1 candidates): . done Checking integrity... done (0 conflicting) The following 1 package(s) will be affected (of 0 checked): Installed packages to be UPGRADED: pfSense-base: 23.05.1 -> 23.09.r.20231027.0151 [pfSense-core] Number of packages to be upgraded: 1 The process will require 5 MiB more space. [1/1] Upgrading pfSense-base from 23.05.1 to 23.09.r.20231027.0151... [1/1] Extracting pfSense-base-23.09.r.20231027.0151: ... done ===> Keeping a copy of current version mtree ===> Removing schg flag from base files ===> Extracting new base tarball ===> Removing static obsoleted files >>> Updating ldconfig... done. >>> Upgrading necessary packages... Checking for upgrades (78 candidates): .......... done Processing candidates (78 candidates): .......... done Checking integrity... done (0 conflicting) The following 88 package(s) will be affected (of 0 checked): New packages to be INSTALLED: boost-libs: 1.82.0_1 [pfSense] dhcpcd: 10.0.2 [pfSense] dhcpleases6: 0.1_3 [pfSense] gmp: 6.3.0 [pfSense] kea: 2.4.0 [pfSense] log4cplus: 2.1.0 [pfSense] pfSense-composer-deps: 0.1 [pfSense] php82-gmp: 8.2.11 [pfSense] py311-libzfs: 1.1.2023020700 [pfSense] py311-setuptools: 63.1.0_1 [pfSense] Installed packages to be UPGRADED: bind-tools: 9.18.13 -> 9.18.16 [pfSense] ca_root_nss: 3.89 -> 3.92 [pfSense] curl: 8.0.1 -> 8.4.0 [pfSense] cyrus-sasl: 2.1.28 -> 2.1.28_1 [pfSense] filterlog: 0.1_9 -> 0.1_10 [pfSense] gettext-runtime: 0.21.1 -> 0.22_1 [pfSense] glib: 2.76.1,2 -> 2.76.4,2 [pfSense] icu: 72.1,1 -> 73.2,1 [pfSense] igmpproxy: 0.3_1,1 -> 0.4,1 [pfSense] isc-dhcp44-relay: 4.4.3P1 -> 4.4.3P1_3 [pfSense] isc-dhcp44-server: 4.4.3P1 -> 4.4.3P1_3 [pfSense] libgcrypt: 1.9.4_1 -> 1.10.2 [pfSense] libgpg-error: 1.46 -> 1.47 [pfSense] libnghttp2: 1.52.0 -> 1.55.1_1 [pfSense] libpsl: 0.21.2_2 -> 0.21.2_3 [pfSense] libssh2: 1.10.0_1,3 -> 1.11.0_1,3 [pfSense] libuv: 1.44.2 -> 1.46.0 [pfSense] libxml2: 2.10.3_1 -> 2.10.4 [pfSense] links: 2.28,1 -> 2.29_1,1 [pfSense] lua-resty-core: 0.1.24 -> 0.1.27 [pfSense] luajit-openresty: 2.1.20230119 -> 2.1.20230410 [pfSense] miniupnpd: 2.2.1_1,1 -> 2.3.3_1,1 [pfSense] mobile-broadband-provider-info: 20221107 -> 20230416 [pfSense] mpd5: 5.9_14 -> 5.9_16 [pfSense] nginx: 1.22.1_5,3 -> 1.24.0_11,3 [pfSense] nmap: 7.93 -> 7.94 [pfSense] ntp: 4.2.8p15_5 -> 4.2.8p17_1 [pfSense] openldap26-client: 2.6.4 -> 2.6.6 [pfSense] openvpn: 2.6.2 -> 2.6.5 [pfSense] pcsc-lite: 1.9.9,2 -> 2.0.0,2 [pfSense] perl5: 5.32.1_3 -> 5.34.1_3 [pfSense] pfSense: 23.05.1 -> 23.09.r.20231027.0151 [pfSense] pfSense-default-config-serial: 23.05.1 -> 23.09.r.20231027.0151 [pfSense] pfSense-repo: 23.05.1 -> 23.09.r.20231027.0151 [pfSense] pftop: 0.8_2 -> 0.8_4 [pfSense] php82: 8.2.4 -> 8.2.11 [pfSense] php82-bcmath: 8.2.4 -> 8.2.11 [pfSense] php82-bz2: 8.2.4 -> 8.2.11 [pfSense] php82-ctype: 8.2.4 -> 8.2.11 [pfSense] php82-curl: 8.2.4 -> 8.2.11 [pfSense] php82-dom: 8.2.4 -> 8.2.11 [pfSense] php82-filter: 8.2.4 -> 8.2.11 [pfSense] php82-gettext: 8.2.4 -> 8.2.11 [pfSense] php82-intl: 8.2.4_1 -> 8.2.11 [pfSense] php82-ldap: 8.2.4 -> 8.2.11 [pfSense] php82-mbstring: 8.2.4 -> 8.2.11 [pfSense] php82-opcache: 8.2.4 -> 8.2.11 [pfSense] php82-openssl_x509_crl: 1.3_2 -> 1.3_3 [pfSense] php82-pcntl: 8.2.4 -> 8.2.11 [pfSense] php82-pdo: 8.2.4 -> 8.2.11 [pfSense] php82-pdo_sqlite: 8.2.4 -> 8.2.11 [pfSense] php82-pear-Mail: 1.4.1,1 -> 1.5.0,1 [pfSense] php82-posix: 8.2.4 -> 8.2.11 [pfSense] php82-readline: 8.2.4 -> 8.2.11 [pfSense] php82-session: 8.2.4 -> 8.2.11 [pfSense] php82-shmop: 8.2.4 -> 8.2.11 [pfSense] php82-simplexml: 8.2.4 -> 8.2.11 [pfSense] php82-sockets: 8.2.4 -> 8.2.11 [pfSense] php82-sqlite3: 8.2.4 -> 8.2.11 [pfSense] php82-sysvmsg: 8.2.4 -> 8.2.11 [pfSense] php82-sysvsem: 8.2.4 -> 8.2.11 [pfSense] php82-sysvshm: 8.2.4 -> 8.2.11 [pfSense] php82-tokenizer: 8.2.4 -> 8.2.11 [pfSense] php82-xml: 8.2.4 -> 8.2.11 [pfSense] php82-xmlreader: 8.2.4 -> 8.2.11 [pfSense] php82-xmlwriter: 8.2.4 -> 8.2.11 [pfSense] php82-zlib: 8.2.4 -> 8.2.11 [pfSense] py39-setuptools: 63.1.0 -> 63.1.0_1 [pfSense] python311: 3.11.2_2 -> 3.11.4 [pfSense] python39: 3.9.16_2 -> 3.9.17 [pfSense] smartmontools: 7.3 -> 7.4 [pfSense] sqlite3: 3.41.0_1,1 -> 3.42.0,1 [pfSense] strongswan: 5.9.10_2 -> 5.9.11_1 [pfSense] uclcmd: 0.1_3 -> 0.2.20211204 [pfSense] unbound: 1.17.1_3 -> 1.18.0 [pfSense] voucher: 0.1_2 -> 0.1_3 [pfSense] zstd: 1.5.4_1 -> 1.5.5 [pfSense] Installed packages to be REINSTALLED: rrdtool-1.8.0_2 [pfSense] (direct dependency changed: perl5) Number of packages to be installed: 10 Number of packages to be upgraded: 77 Number of packages to be reinstalled: 1 The process will require 388 MiB more space. [1/88] Upgrading libxml2 from 2.10.3_1 to 2.10.4... [1/88] Extracting libxml2-2.10.4: .......... done [2/88] Upgrading php82 from 8.2.4 to 8.2.11... [2/88] Extracting php82-8.2.11: .......... done [3/88] Upgrading gettext-runtime from 0.21.1 to 0.22_1... [3/88] Extracting gettext-runtime-0.22_1: .......... done [4/88] Upgrading php82-zlib from 8.2.4 to 8.2.11... [4/88] Extracting php82-zlib-8.2.11: ........ done [5/88] Upgrading python39 from 3.9.16_2 to 3.9.17... [5/88] Extracting python39-3.9.17: .......... done [6/88] Upgrading python311 from 3.11.2_2 to 3.11.4... [6/88] Extracting python311-3.11.4: ..pid 530 (pkg-static), jid 0, uid 0, was killed: failed to reclaim memory Child process pid=530 terminated abnormally: Killed >>> Unlocking package pfSense-pkg-FTP_Client_Proxy... done. >>> Unlocking package pfSense-pkg-nmap... done. External config loader 1.0 is now starting... mmcsd0s1 mmcsd0s2 mmcsd0s3 mmcsd0s3a Launching the init system... done. Initializing.................. done. Starting device manager (devd)...done. Loading configuration....done. Updating configuration...2023-10-31T12:39:34.125757-05:00 - php-fpm 622 - - /rc.linkup: Ignoring link event during boot sequence. 2023-10-31T12:39:34.135021-05:00 - php-fpm 621 - - /rc.linkup: Ignoring link event during boot sequence. 2023-10-31T12:39:34.156343-05:00 - php-fpm 622 - - /rc.linkup: Ignoring link event during boot sequence. 2023-10-31T12:39:34.179513-05:00 - php-fpm 947 - - /rc.linkup: Ignoring link event during boot sequence. done. Checking config backups consistency.................................done. Loading cryptographic accelerator drivers...safexcel0: <SafeXcel EIP-97 crypto accelerator> mem 0x90000-0xaffff irq 18,19,20,21,22,23 on simplebus1 done. Setting up extended sysctls...done. Executing early shell commands...done. Setting timezone...done. Configuring loopback interface...lo0: link state changed to UP done. Starting syslog...done. Configuring switch...done. Setting up interfaces microcode...done. Configuring loopback interface...done. Creating wireless clone interfaces...done. Configuring VLAN interfaces...done. Configuring WAN interface...done. Configuring LAN interface...done. Configuring LAN2 interface...done. Configuring WIRELESS interface...done. Configuring BRIDGE interface...done. Configuring CARP settings...done. Syncing OpenVPN settings...done. Configuring firewall......done. Starting PFLOG...done. Setting up gateway monitors...done. Setting up static routes...[fib_algo] inet.0 (bsearch4#36) rebuild_fd_flm: switching algo to radix4_lockless done. Setting up DNSs... Starting DNS Resolver...done. Synchronizing user settings...done. Configuring CRON...done. Bootstrapping clock...done. Starting NTP Server...done. Starting webConfigurator...done. Starting DHCP service...done. Configuring firewall......done. Generating RRD graphs...done. Starting syslog...done. Starting CRON... done. Starting package nmap...done. Starting package FTP Client Proxy...done. .: cannot open /etc/rc.be_functions.sh: No such file or directory Enter full pathname of shell or RETURN for /bin/sh: -
@LostInIgnorance said in SG-1100 Enter full pathname of shell or RETURN for /bin/sh::
[6/88] Extracting python311-3.11.4: ..pid 530 (pkg-static), jid 0, uid 0, was killed: failed to reclaim memory
Child process pid=530 terminated abnormally: KilledHmm, that's not good.
Ok first check the available space on the drive. If it's close to full try removing any old ZFS snapshots and try again.
Steve
-
@stephenw10 Nope, plenty of space and was able to replicate the issue twice now with the exact same results
-
Does it fail at the same step each time?
-
@stephenw10 Yep, this is from the 27th snapshot log
The process will require 388 MiB more space. [1/88] Upgrading libxml2 from 2.10.3_1 to 2.10.4... [1/88] Extracting libxml2-2.10.4: .......... done [2/88] Upgrading php82 from 8.2.4 to 8.2.11... [2/88] Extracting php82-8.2.11: .......... done [3/88] Upgrading gettext-runtime from 0.21.1 to 0.22_1... [3/88] Extracting gettext-runtime-0.22_1: .......... done [4/88] Upgrading php82-zlib from 8.2.4 to 8.2.11... [4/88] Extracting php82-zlib-8.2.11: ........ done [5/88] Upgrading python39 from 3.9.16_2 to 3.9.17... [5/88] Extracting python39-3.9.17: .......... done [6/88] Upgrading python311 from 3.11.2_2 to 3.11.4... [6/88] Extracting python311-3.11.4: ..pid 530 (pkg-static), jid 0, uid 0, was killed: failed to reclaim memory Child process pid=530 terminated abnormally: Killed -
Hmm, I can't replicate that:
The process will require 398 MiB more space. [1/88] Upgrading libxml2 from 2.10.3_1 to 2.10.4... [1/88] Extracting libxml2-2.10.4: .......... done [2/88] Upgrading php82 from 8.2.4 to 8.2.11... [2/88] Extracting php82-8.2.11: .......... done [3/88] Upgrading gettext-runtime from 0.21.1 to 0.22_1... [3/88] Extracting gettext-runtime-0.22_1: .......... done [4/88] Upgrading php82-zlib from 8.2.4 to 8.2.11... [4/88] Extracting php82-zlib-8.2.11: ........ done [5/88] Upgrading python39 from 3.9.16_2 to 3.9.17... [5/88] Extracting python39-3.9.17: .......... done [6/88] Upgrading python311 from 3.11.2_2 to 3.11.4... [6/88] Extracting python311-3.11.4: .......... done [7/88] Upgrading php82-xml from 8.2.4 to 8.2.11... [7/88] Extracting php82-xml-8.2.11: ......... doneWhat packages do you have installed?
-
@stephenw10 Just FTP proxy and nmap
-
I'm still unable to replicate it.
Are you able to try reinstalling and upgrading from a clean 23.05.1 install? -
@stephenw10 I can try this later today and let you know of the outcome, though I was on 23.05.1 before the upgrade.
-
@stephenw10 I reloaded the SG-1100 with the latest factory image and proceeded to do the upgrade with no error this time.
-
Hmm, OK. Odd. I haven't seen any other reports of that. Let us know if you see it again.
Steve
-
The first SG-1100 seemed to upgrade just fine.
On the second SG-1100, I ran an upgrade from 23.01 to 23.05.1 that seemed uneventful. Then I tried to upgrade to 23.09, and ended up with this:
Starting CRON... done.
Starting package AWS VPC Wizard...done.
Starting package IPsec Profile Wizard...done.
.: cannot open /etc/rc.be_functions.sh: No such file or directory
Enter full pathname of shell or RETURN for /bin/sh:As far as I can tell, this SG-1100 was re-imaged with pfSense-plus-compat-recovery-23.01-RELEASE-aarch64.img.gz after a failed attempted upgrade to 23.01 and hasn't been touched since. (At this point, I basically used the SG-1100's to test the water before updating the production SG-3100.)
FYI.
Regards,
Ken
-
Do you have an upgrade log from that?
Is it running an packages? We have seen some upgrades fail due to ram exhaustion that present as you see after rebooting.
Steve
