Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    CE 2.7.1 Make Chelsio T540-CR unusable

    General pfSense Questions
    3
    15
    869
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • J
      Jarhead
      last edited by Jarhead

      Anyone have any idea what changed between the 2.7.1 and 2.7.0 that would cause a trouble with a Chelsio card?
      2.7.0 I had no problems at all. Did the upgrade remotely and the system wouldn't come back up.
      After getting physical access I saw the link lights on the t540 turning on and off constantly. Not blinking as in showing activity, they were shutting off.
      Got everything back up by going back to onboard copper ports and tried to switch one network back to the fiber ports to test with.
      I did manage to keep that one network up for over 5 minutes by hard coding to 1000full but as soon as I unplugged it and plugged it back in, it went back to the problem again.
      Seems like it's a negotiation problem but I would think that hard coding would make it work even after I unplugged it.

      I did notice the chelsio firmware was updated with the 2.7.1 upgrade. Wondering if that's the actual problem I'm having. Does anyone know if downgrading is possible?

      1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by

        Do you see anything logged at boot? Any errors? Or in the system log when it's flapping like that?

        J 2 Replies Last reply Reply Quote 0
        • T
          tman222
          last edited by

          So far no issues to report on pfSense Plus 23.09 with Chelsio T540-SO-CR. Could this issue be isolated to non SO cards? Have you tried shutting down the system completely, unplugging the power, and then restarting to see if it makes any difference? Maybe the firmware update didn't fully finish? Hope this helps.

          J 1 Reply Last reply Reply Quote 0
          • J
            Jarhead @stephenw10
            last edited by

            @stephenw10 said in CE 2.7.1 Make Chelsio T540-CR unusable:

            Do you see anything logged at boot? Any errors? Or in the system log when it's flapping like that?

            No errors on boot. I'll have to check when the ports are in use.
            Not sure when I'll get a chance to check that.

            I'm assuming the firmware upgrade came from the updating of FreeBSD in 2.7.1. Apparently it's working in FreeBSD from what I can find, is there something in pfSense itself that was changed that would cause this?

            1 Reply Last reply Reply Quote 0
            • J
              Jarhead @tman222
              last edited by

              @tman222 said in CE 2.7.1 Make Chelsio T540-CR unusable:

              So far no issues to report on pfSense Plus 23.09 with Chelsio T540-SO-CR. Could this issue be isolated to non SO cards? Have you tried shutting down the system completely, unplugging the power, and then restarting to see if it makes any difference? Maybe the firmware update didn't fully finish? Hope this helps.

              I actually did try that, that's when it did the firmware upgrade.
              I'll have to check but do you know if 23.09 included the same FreeBSD update as 2.7.1?
              Did you notice if your firmware updated?
              Can you check which version you're running?
              sysctl dev.t5nex.0.firmware_version

              dev.t5nex.0.firmware_version: 1.27.4.0

              T 1 Reply Last reply Reply Quote 0
              • J
                Jarhead @stephenw10
                last edited by

                @stephenw10 said in CE 2.7.1 Make Chelsio T540-CR unusable:

                Do you see anything logged at boot? Any errors? Or in the system log when it's flapping like that?

                I have one network that isn't being used tonight so I swapped that to the Chelsio, here's the logs:

                Nov 19 16:33:47	kernel		cxl1: link state changed to DOWN
Nov 19 16:33:47	check_reload_status	438	Linkup starting cxl1
Nov 19 16:33:46	kernel		cxl1: link state changed to UP
Nov 19 16:33:46	check_reload_status	438	Linkup starting cxl1
Nov 19 16:33:44	php-fpm	48558	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:33:44	php-fpm	48558	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:33:44	kernel		cxl1: link state changed to DOWN
Nov 19 16:33:44	check_reload_status	438	Linkup starting cxl1
Nov 19 16:33:43	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:33:43	php-fpm	398	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:33:42	kernel		cxl1: link state changed to UP
Nov 19 16:33:42	check_reload_status	438	Linkup starting cxl1
Nov 19 16:33:42	kernel		cxl1: link state changed to DOWN
Nov 19 16:33:42	check_reload_status	438	Linkup starting cxl1
Nov 19 16:33:42	php-fpm	67994	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:33:42	php-fpm	67994	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:33:41	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:33:41	php-fpm	98956	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:33:40	kernel		cxl1: link state changed to UP
Nov 19 16:33:40	check_reload_status	438	Linkup starting cxl1
Nov 19 16:33:39	php-fpm	67994	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:33:39	php-fpm	67994	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:33:39	avahi-daemon	51827	Registering new address record for 10.12.8.129 on cxl1.IPv4.
Nov 19 16:33:39	avahi-daemon	51827	New relevant interface cxl1.IPv4 for mDNS.
Nov 19 16:33:39	avahi-daemon	51827	Joining mDNS multicast group on interface cxl1.IPv4 with address 10.12.8.129.
Nov 19 16:33:38	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:33:38	php-fpm	98956	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:33:37	kernel		cxl1: link state changed to DOWN
Nov 19 16:33:37	check_reload_status	438	Linkup starting cxl1
Nov 19 16:33:37	kernel		cxl1: link state changed to UP
Nov 19 16:33:37	check_reload_status	438	Linkup starting cxl1
Nov 19 16:33:35	php-fpm	48558	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:33:35	php-fpm	48558	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:33:35	kernel		cxl1: link state changed to DOWN
Nov 19 16:33:35	check_reload_status	438	Linkup starting cxl1
Nov 19 16:33:34	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:33:34	php-fpm	48558	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:33:33	kernel		cxl1: link state changed to UP
Nov 19 16:33:33	check_reload_status	438	Linkup starting cxl1
Nov 19 16:33:33	kernel		cxl1: link state changed to DOWN
Nov 19 16:33:33	check_reload_status	438	Linkup starting cxl1
Nov 19 16:33:32	php-fpm	81516	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:33:32	php-fpm	81516	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:33:31	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:33:31	php-fpm	399	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:33:31	avahi-daemon	57932	Leaving mDNS multicast group on interface cxl1.IPv4 with address 10.12.8.129.
Nov 19 16:33:30	kernel		cxl1: link state changed to UP
Nov 19 16:33:30	check_reload_status	438	Linkup starting cxl1
Nov 19 16:33:29	php-fpm	67994	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:33:29	php-fpm	67994	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:33:28	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:33:28	php-fpm	67994	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:33:27	kernel		cxl1: link state changed to DOWN
Nov 19 16:33:27	check_reload_status	438	Linkup starting cxl1
Nov 19 16:33:27	kernel		cxl1: link state changed to UP
Nov 19 16:33:27	check_reload_status	438	Linkup starting cxl1
Nov 19 16:33:25	php-fpm	81516	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:33:25	php-fpm	81516	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:33:25	kernel		cxl1: link state changed to DOWN
Nov 19 16:33:25	check_reload_status	438	Linkup starting cxl1
Nov 19 16:33:24	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:33:24	php-fpm	399	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:33:23	kernel		cxl1: link state changed to UP
Nov 19 16:33:23	check_reload_status	438	Linkup starting cxl1
Nov 19 16:33:23	kernel		cxl1: link state changed to DOWN
Nov 19 16:33:23	check_reload_status	438	Linkup starting cxl1
Nov 19 16:33:23	php-fpm	48558	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:33:23	php-fpm	48558	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:33:22	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:33:22	php-fpm	81516	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:33:21	kernel		cxl1: link state changed to UP
Nov 19 16:33:21	check_reload_status	438	Linkup starting cxl1
Nov 19 16:33:20	php-fpm	67994	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:33:20	php-fpm	67994	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:33:19	avahi-daemon	57932	Registering new address record for 10.12.8.129 on cxl1.IPv4.
Nov 19 16:33:19	avahi-daemon	57932	New relevant interface cxl1.IPv4 for mDNS.
Nov 19 16:33:19	avahi-daemon	57932	Joining mDNS multicast group on interface cxl1.IPv4 with address 10.12.8.129.
Nov 19 16:33:19	avahi-daemon	5663	Leaving mDNS multicast group on interface cxl1.IPv4 with address 10.12.8.129.
Nov 19 16:33:19	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:33:19	php-fpm	399	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:33:18	kernel		cxl1: link state changed to DOWN
Nov 19 16:33:18	check_reload_status	438	Linkup starting cxl1
Nov 19 16:33:18	kernel		cxl1: link state changed to UP
Nov 19 16:33:18	check_reload_status	438	Linkup starting cxl1
Nov 19 16:33:16	php-fpm	48558	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:33:16	php-fpm	48558	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:33:16	kernel		cxl1: link state changed to DOWN
Nov 19 16:33:16	check_reload_status	438	Linkup starting cxl1
Nov 19 16:33:15	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:33:15	php-fpm	399	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:33:14	kernel		cxl1: link state changed to UP
Nov 19 16:33:14	check_reload_status	438	Linkup starting cxl1
Nov 19 16:33:14	kernel		cxl1: link state changed to DOWN
Nov 19 16:33:14	check_reload_status	438	Linkup starting cxl1
Nov 19 16:33:13	php-fpm	98956	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:33:13	php-fpm	98956	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:33:12	avahi-daemon	5663	Registering new address record for 10.12.8.129 on cxl1.IPv4.
Nov 19 16:33:12	avahi-daemon	5663	New relevant interface cxl1.IPv4 for mDNS.
Nov 19 16:33:12	avahi-daemon	5663	Joining mDNS multicast group on interface cxl1.IPv4 with address 10.12.8.129.
Nov 19 16:33:12	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:33:12	php-fpm	398	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:33:11	kernel		cxl1: link state changed to UP
Nov 19 16:33:11	check_reload_status	438	Linkup starting cxl1
Nov 19 16:33:10	php-fpm	67994	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:33:10	php-fpm	67994	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:33:09	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:33:09	php-fpm	48558	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:33:08	kernel		cxl1: link state changed to DOWN
Nov 19 16:33:08	check_reload_status	438	Linkup starting cxl1
Nov 19 16:33:08	kernel		cxl1: link state changed to UP
Nov 19 16:33:08	check_reload_status	438	Linkup starting cxl1
Nov 19 16:33:06	php-fpm	398	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:33:06	php-fpm	398	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:33:06	kernel		cxl1: link state changed to DOWN
Nov 19 16:33:06	check_reload_status	438	Linkup starting cxl1
Nov 19 16:33:05	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:33:05	php-fpm	398	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:33:04	kernel		cxl1: link state changed to UP
Nov 19 16:33:04	check_reload_status	438	Linkup starting cxl1
Nov 19 16:33:04	kernel		cxl1: link state changed to DOWN
Nov 19 16:33:04	check_reload_status	438	Linkup starting cxl1
Nov 19 16:33:03	php-fpm	67994	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:33:03	php-fpm	67994	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:33:02	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:33:02	php-fpm	398	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:33:02	avahi-daemon	34063	Leaving mDNS multicast group on interface cxl1.IPv4 with address 10.12.8.129.
Nov 19 16:33:01	kernel		cxl1: link state changed to UP
Nov 19 16:33:01	check_reload_status	438	Linkup starting cxl1
Nov 19 16:33:01	php-fpm	98956	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:33:01	php-fpm	98956	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:33:00	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:33:00	php-fpm	81516	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:32:59	kernel		cxl1: link state changed to DOWN
Nov 19 16:32:59	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:59	kernel		cxl1: link state changed to UP
Nov 19 16:32:59	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:57	php-fpm	48558	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:32:57	php-fpm	48558	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:32:57	kernel		cxl1: link state changed to DOWN
Nov 19 16:32:57	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:56	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:32:56	php-fpm	398	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:32:55	kernel		cxl1: link state changed to UP
Nov 19 16:32:55	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:54	kernel		cxl1: link state changed to DOWN
Nov 19 16:32:54	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:54	php-fpm	98956	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:32:54	php-fpm	98956	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:32:53	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:32:53	php-fpm	398	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:32:52	kernel		cxl1: link state changed to UP
Nov 19 16:32:52	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:51	php-fpm	81516	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:32:51	php-fpm	81516	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:32:50	avahi-daemon	34063	Registering new address record for 10.12.8.129 on cxl1.IPv4.
Nov 19 16:32:50	avahi-daemon	34063	New relevant interface cxl1.IPv4 for mDNS.
Nov 19 16:32:50	avahi-daemon	34063	Joining mDNS multicast group on interface cxl1.IPv4 with address 10.12.8.129.
Nov 19 16:32:50	avahi-daemon	79147	Leaving mDNS multicast group on interface cxl1.IPv4 with address 10.12.8.129.
Nov 19 16:32:50	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:32:50	php-fpm	98956	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:32:49	kernel		cxl1: link state changed to DOWN
Nov 19 16:32:49	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:49	kernel		cxl1: link state changed to UP
Nov 19 16:32:49	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:47	php-fpm	398	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:32:47	php-fpm	398	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:32:47	kernel		cxl1: link state changed to DOWN
Nov 19 16:32:47	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:46	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:32:46	php-fpm	98956	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:32:45	kernel		cxl1: link state changed to UP
Nov 19 16:32:45	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:45	kernel		cxl1: link state changed to DOWN
Nov 19 16:32:45	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:44	php-fpm	67994	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:32:44	php-fpm	67994	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:32:44	avahi-daemon	79147	Registering new address record for 10.12.8.129 on cxl1.IPv4.
Nov 19 16:32:44	avahi-daemon	79147	New relevant interface cxl1.IPv4 for mDNS.
Nov 19 16:32:44	avahi-daemon	79147	Joining mDNS multicast group on interface cxl1.IPv4 with address 10.12.8.129.
Nov 19 16:32:43	avahi-daemon	77220	Leaving mDNS multicast group on interface cxl1.IPv4 with address 10.12.8.129.
Nov 19 16:32:43	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:32:43	php-fpm	398	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:32:42	kernel		cxl1: link state changed to UP
Nov 19 16:32:42	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:42	php-fpm	48558	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:32:42	php-fpm	48558	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:32:41	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:32:41	php-fpm	67994	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:32:40	kernel		cxl1: link state changed to DOWN
Nov 19 16:32:40	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:40	kernel		cxl1: link state changed to UP
Nov 19 16:32:40	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:38	php-fpm	399	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:32:38	php-fpm	399	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:32:38	kernel		cxl1: link state changed to DOWN
Nov 19 16:32:38	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:37	avahi-daemon	77220	Registering new address record for 10.12.8.129 on cxl1.IPv4.
Nov 19 16:32:37	avahi-daemon	77220	New relevant interface cxl1.IPv4 for mDNS.
Nov 19 16:32:37	avahi-daemon	77220	Joining mDNS multicast group on interface cxl1.IPv4 with address 10.12.8.129.
Nov 19 16:32:37	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:32:37	php-fpm	399	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:32:36	kernel		cxl1: link state changed to UP
Nov 19 16:32:36	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:35	kernel		cxl1: link state changed to DOWN
Nov 19 16:32:35	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:35	php-fpm	67994	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:32:35	php-fpm	67994	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:32:34	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:32:34	php-fpm	81516	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:32:33	kernel		cxl1: link state changed to UP
Nov 19 16:32:33	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:32	php-fpm	398	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:32:32	php-fpm	398	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:32:31	avahi-daemon	6392	Leaving mDNS multicast group on interface cxl1.IPv4 with address 10.12.8.129.
Nov 19 16:32:31	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:32:31	php-fpm	98956	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:32:30	kernel		cxl1: link state changed to DOWN
Nov 19 16:32:30	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:30	kernel		cxl1: link state changed to UP
Nov 19 16:32:30	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:28	kernel		cxl1: link state changed to DOWN
Nov 19 16:32:28	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:25	php-fpm	399	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:32:25	php-fpm	399	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:32:25	avahi-daemon	6392	Registering new address record for 10.12.8.129 on cxl1.IPv4.
Nov 19 16:32:25	avahi-daemon	6392	New relevant interface cxl1.IPv4 for mDNS.
Nov 19 16:32:25	avahi-daemon	6392	Joining mDNS multicast group on interface cxl1.IPv4 with address 10.12.8.129.
Nov 19 16:32:25	avahi-daemon	18125	Leaving mDNS multicast group on interface cxl1.IPv4 with address 10.12.8.129.
Nov 19 16:32:24	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:32:24	php-fpm	98956	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:32:23	kernel		cxl1: link state changed to UP
Nov 19 16:32:23	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:22	php-fpm	81516	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:32:22	php-fpm	81516	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:32:21	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:32:21	php-fpm	399	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:32:21	kernel		cxl1: link state changed to DOWN
Nov 19 16:32:21	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:20	kernel		cxl1: link state changed to UP
Nov 19 16:32:20	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:20	avahi-daemon	18125	Registering new address record for 10.12.8.129 on cxl1.IPv4.
Nov 19 16:32:20	avahi-daemon	18125	New relevant interface cxl1.IPv4 for mDNS.
Nov 19 16:32:20	avahi-daemon	18125	Joining mDNS multicast group on interface cxl1.IPv4 with address 10.12.8.129.
Nov 19 16:32:19	php-fpm	98956	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:32:19	php-fpm	98956	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:32:18	kernel		cxl1: link state changed to DOWN
Nov 19 16:32:18	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:18	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:32:18	php-fpm	398	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:32:17	kernel		cxl1: link state changed to UP
Nov 19 16:32:17	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:16	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:16	kernel		cxl1: link state changed to DOWN
Nov 19 16:32:16	php-fpm	48558	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:32:16	php-fpm	48558	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:32:15	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:32:15	php-fpm	48558	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:32:14	kernel		cxl1: link state changed to UP
Nov 19 16:32:14	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:13	php-fpm	399	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:32:13	php-fpm	399	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:32:12	avahi-daemon	46740	Leaving mDNS multicast group on interface cxl1.IPv4 with address 10.12.8.129.
Nov 19 16:32:12	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:32:12	php-fpm	81516	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:32:11	kernel		cxl1: link state changed to DOWN
Nov 19 16:32:11	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:11	kernel		cxl1: link state changed to UP
Nov 19 16:32:11	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:09	php-fpm	98956	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:32:09	php-fpm	98956	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:32:09	kernel		cxl1: link state changed to DOWN
Nov 19 16:32:09	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:08	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:32:08	php-fpm	98956	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:32:07	kernel		cxl1: link state changed to UP
Nov 19 16:32:07	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:07	kernel		cxl1: link state changed to DOWN
Nov 19 16:32:07	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:06	php-fpm	399	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:32:06	php-fpm	399	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:32:05	avahi-daemon	46740	Registering new address record for 10.12.8.129 on cxl1.IPv4.
Nov 19 16:32:05	avahi-daemon	46740	New relevant interface cxl1.IPv4 for mDNS.
Nov 19 16:32:05	avahi-daemon	46740	Joining mDNS multicast group on interface cxl1.IPv4 with address 10.12.8.129.
Nov 19 16:32:05	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:32:05	php-fpm	399	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:32:05	avahi-daemon	42057	Leaving mDNS multicast group on interface cxl1.IPv4 with address 10.12.8.129.
Nov 19 16:32:04	kernel		cxl1: link state changed to UP
Nov 19 16:32:04	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:03	php-fpm	81516	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:32:03	php-fpm	81516	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:32:02	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:32:02	php-fpm	81516	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:32:02	kernel		cxl1: link state changed to DOWN
Nov 19 16:32:02	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:01	kernel		cxl1: link state changed to UP
Nov 19 16:32:01	check_reload_status	438	Linkup starting cxl1
Nov 19 16:32:00	avahi-daemon	42057	Registering new address record for 10.12.8.129 on cxl1.IPv4.
Nov 19 16:32:00	avahi-daemon	42057	New relevant interface cxl1.IPv4 for mDNS.
Nov 19 16:32:00	avahi-daemon	42057	Joining mDNS multicast group on interface cxl1.IPv4 with address 10.12.8.129.
Nov 19 16:32:00	avahi-daemon	73324	Leaving mDNS multicast group on interface cxl1.IPv4 with address 10.12.8.129.
Nov 19 16:32:00	php-fpm	399	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:32:00	php-fpm	399	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:31:59	kernel		cxl1: link state changed to DOWN
Nov 19 16:31:59	check_reload_status	438	Linkup starting cxl1
Nov 19 16:31:59	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:31:59	php-fpm	399	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:31:58	kernel		cxl1: link state changed to UP
Nov 19 16:31:58	check_reload_status	438	Linkup starting cxl1
Nov 19 16:31:57	check_reload_status	438	Linkup starting cxl1
Nov 19 16:31:57	kernel		cxl1: link state changed to DOWN
Nov 19 16:31:57	php-fpm	81516	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:31:57	php-fpm	81516	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:31:56	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:31:56	php-fpm	398	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:31:55	kernel		cxl1: link state changed to UP
Nov 19 16:31:55	check_reload_status	438	Linkup starting cxl1
Nov 19 16:31:54	php-fpm	399	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:31:54	php-fpm	399	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:31:54	avahi-daemon	73324	Registering new address record for 10.12.8.129 on cxl1.IPv4.
Nov 19 16:31:54	avahi-daemon	73324	New relevant interface cxl1.IPv4 for mDNS.
Nov 19 16:31:54	avahi-daemon	73324	Joining mDNS multicast group on interface cxl1.IPv4 with address 10.12.8.129.
Nov 19 16:31:53	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:31:53	php-fpm	81516	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:31:52	kernel		cxl1: link state changed to DOWN
Nov 19 16:31:52	check_reload_status	438	Linkup starting cxl1
Nov 19 16:31:52	kernel		cxl1: link state changed to UP
Nov 19 16:31:52	check_reload_status	438	Linkup starting cxl1
Nov 19 16:31:50	php-fpm	98956	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:31:50	php-fpm	98956	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:31:50	kernel		cxl1: link state changed to DOWN
Nov 19 16:31:50	check_reload_status	438	Linkup starting cxl1
Nov 19 16:31:49	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:31:49	php-fpm	399	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:31:48	kernel		cxl1: link state changed to UP
Nov 19 16:31:48	check_reload_status	438	Linkup starting cxl1
Nov 19 16:31:48	kernel		cxl1: link state changed to DOWN
Nov 19 16:31:48	check_reload_status	438	Linkup starting cxl1
Nov 19 16:31:47	php-fpm	81516	/rc.newwanip: rc.newwanip: on (IP address: 10.12.8.129) (interface: IOTNET[opt2]) (real interface: cxl1).
Nov 19 16:31:47	php-fpm	81516	/rc.newwanip: rc.newwanip: Info: starting on cxl1.
Nov 19 16:31:46	check_reload_status	438	rc.newwanip starting cxl1
Nov 19 16:31:46	php-fpm	81516	/rc.linkup: HOTPLUG: Triggering address refresh on opt2 (cxl1)
Nov 19 16:31:45	kernel		cxl1: link state changed to UP
Nov 19 16:31:45	check_reload_status	438	Linkup starting cxl1
Nov 19 16:31:06	kernel		cxl1: nrxq (16) != kernel RSS buckets (32);performance will be impacted.
Nov 19 16:31:06	avahi-daemon	65081	Withdrawing workstation service for cxl1.
Nov 19 16:31:06	kernel		cxl1: tso6 disabled due to -txcsum6.
Nov 19 16:31:06	kernel		cxl1: tso4 disabled due to -txcsum.
                J 1 Reply Last reply Reply Quote 0
                • J
                  Jarhead @Jarhead
                  last edited by

                  @Jarhead Just an update, about 10 minutes after plugging it in it finally linked solid and has been up since.
                  Not sure what's causing the negotiation delay though.

                  1 Reply Last reply Reply Quote 0
                  • T
                    tman222 @Jarhead
                    last edited by

                    @Jarhead said in CE 2.7.1 Make Chelsio T540-CR unusable:

                    @tman222 said in CE 2.7.1 Make Chelsio T540-CR unusable:

                    So far no issues to report on pfSense Plus 23.09 with Chelsio T540-SO-CR. Could this issue be isolated to non SO cards? Have you tried shutting down the system completely, unplugging the power, and then restarting to see if it makes any difference? Maybe the firmware update didn't fully finish? Hope this helps.

                    I actually did try that, that's when it did the firmware upgrade.
                    I'll have to check but do you know if 23.09 included the same FreeBSD update as 2.7.1?
                    Did you notice if your firmware updated?
                    Can you check which version you're running?
                    sysctl dev.t5nex.0.firmware_version

                    dev.t5nex.0.firmware_version: 1.27.4.0

                    Hi @Jarhead - I just checked and my T540-SO-CR is also on firmware 1.27.4.0 as of pfSense Plus 23.09. Do you have any other tunables / customizations set for the card?

                    J 1 Reply Last reply Reply Quote 0
                    • J
                      Jarhead @tman222
                      last edited by

                      @tman222 I have all the pfSense suggested tunables.
                      Here's my loader.conf.local file:

                      hw.cxgbe.niccaps_allowed="1"
hw.cxgbe.toecaps_allowed="0"
hw.cxgbe.rdmacaps_allowed="0"
hw.cxgbe.iscsicaps_allowed="0"
hw.cxgbe.fcoecaps_allowed="0"
hw.cxgbe.pause_settings="0"
hw.cxgbe.fw_install="2"

                      The last line I just added after this trouble and hasn't been used yet.
                      I'm thinking of trying to go back to 2.7.0, with that last line used.
                      Apparently it will allow the card to be downgraded.
                      Then, set the last line to "0", which will prevent it from being upgraded, and go back to 2.7.1.
                      But since you're at the latest firmware and no problems, I have to find out if 23.09 included the latest FreeBSD.
                      @stephenw10 Would you know the answer to that?

                      1 Reply Last reply Reply Quote 0
                      • stephenw10S
                        stephenw10 Netgate Administrator
                        last edited by

                        Yup, 23.09 and 2.7.1 are built on very close FreeBSD versions I would expect the drivers to be identical.

                        Do you see anything logged on whatever it's connected to? Hard to imagine why it's losing link like that and then stabilising.

                        J 2 Replies Last reply Reply Quote 0
                        • J
                          Jarhead @stephenw10
                          last edited by

                          @stephenw10 Did the downgrade by going back to 2.7.0 with the tunable set to allow firmware downgrade. It installed 1.27.0.0.
                          Has the same problem.
                          Went back to 2.7.1 with 1.27.4.0 again. Same problem.
                          Looking like a hardware problem at this point.
                          Gonna try to get a chance to test the card in a windows pc.
                          I'll update this thread with results.

                          1 Reply Last reply Reply Quote 1
                          • J
                            Jarhead @stephenw10
                            last edited by

                            @stephenw10
                            Getting more weird now.
                            Took the router to work today, plugged into 3 networks there and saw the same problem.
                            Installed Windows, plugged into the same networks and all worked perfectly. Instant links.
                            Went back to pfSense, saw that the Windows install downgraded the firmware and pfSense updated it back to the latest, plugged into the same networks and it worked perfectly. Was gonna chalk it up to a bad firmware upgrade but as soon as I got it installed at home again, back to the problem.
                            Also, got this:
                            info.0
                            textdump.tar.0

                            Can you take a look at that?

                            I'm starting to wonder if the old problem with Chelsio and Wireguard is back.
                            @tman222 are you running Wireguard with any active tunnels?

                            I'm gonna build a couple OpenVPN tunnels and disable the Wireguard to see if that corrects this.

                            T 1 Reply Last reply Reply Quote 0
                            • stephenw10S
                              stephenw10 Netgate Administrator
                              last edited by

                              Backtrace:

                              db:0:kdb.enter.default>  bt
Tracing pid 7113 tid 100670 td 0xfffffe017e863720
kdb_enter() at kdb_enter+0x32/frame 0xfffffe017eb1c820
vpanic() at vpanic+0x163/frame 0xfffffe017eb1c950
panic() at panic+0x43/frame 0xfffffe017eb1c9b0
trap_fatal() at trap_fatal+0x40c/frame 0xfffffe017eb1ca10
trap_pfault() at trap_pfault+0x4f/frame 0xfffffe017eb1ca70
calltrap() at calltrap+0x8/frame 0xfffffe017eb1ca70
--- trap 0xc, rip = 0xffffffff80ef1f6a, rsp = 0xfffffe017eb1cb40, rbp = 0xfffffe017eb1cb70 ---
X_ip_mrouter_done() at X_ip_mrouter_done+0x32a/frame 0xfffffe017eb1cb70
rip_detach() at rip_detach+0x3f/frame 0xfffffe017eb1cba0
sorele_locked() at sorele_locked+0x89/frame 0xfffffe017eb1cbc0
soclose() at soclose+0x14a/frame 0xfffffe017eb1cc20
_fdrop() at _fdrop+0x11/frame 0xfffffe017eb1cc40
closef() at closef+0x24a/frame 0xfffffe017eb1ccd0
fdescfree() at fdescfree+0x4c6/frame 0xfffffe017eb1cd90
exit1() at exit1+0x49e/frame 0xfffffe017eb1cdf0
sys_exit() at sys_exit+0xd/frame 0xfffffe017eb1ce00
amd64_syscall() at amd64_syscall+0x109/frame 0xfffffe017eb1cf30
fast_syscall_common() at fast_syscall_common+0xf8/frame 0xfffffe017eb1cf30
--- syscall (1, FreeBSD ELF64, exit), rip = 0x821d6840a, rsp = 0x8209799e8, rbp = 0x820979a00 ---

                              Panic:

                              Fatal trap 12: page fault while in kernel mode
cpuid = 3; apic id = 03
fault virtual address	= 0x0
fault code		= supervisor read data, page not present
instruction pointer	= 0x20:0xffffffff80ef1f6a
stack pointer	        = 0x28:0xfffffe017eb1cb40
frame pointer	        = 0x28:0xfffffe017eb1cb70
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 7113 (pimd)
rdi: fffffe00353e1f38 rsi: 0000000000000004 rdx: 0000000000000001
rcx: 0000000000000000  r8: 0000000000000000  r9: fffff80009169000
rax: 0000000000000100 rbx: fffffe017e863720 rbp: fffffe017eb1cb70
r10: 0000000000000000 r11: fffffe00381db970 r12: 0000000000000000
r13: 0000000000000000 r14: fffff8040b29c700 r15: 0000000000000000
trap number		= 12
panic: page fault
cpuid = 3
time = 1700569939
KDB: enter: panic

                              That's this: https://redmine.pfsense.org/issues/14917

                              So likely related because the Chelsio NIC keeps losing link which is when that bug is triggered.

                              Steve

                              1 Reply Last reply Reply Quote 0
                              • T
                                tman222 @Jarhead
                                last edited by

                                @Jarhead said in CE 2.7.1 Make Chelsio T540-CR unusable:

                                @stephenw10
                                Getting more weird now.
                                Took the router to work today, plugged into 3 networks there and saw the same problem.
                                Installed Windows, plugged into the same networks and all worked perfectly. Instant links.
                                Went back to pfSense, saw that the Windows install downgraded the firmware and pfSense updated it back to the latest, plugged into the same networks and it worked perfectly. Was gonna chalk it up to a bad firmware upgrade but as soon as I got it installed at home again, back to the problem.
                                Also, got this:
                                info.0
                                textdump.tar.0

                                Can you take a look at that?

                                I'm starting to wonder if the old problem with Chelsio and Wireguard is back.
                                @tman222 are you running Wireguard with any active tunnels?

                                I'm gonna build a couple OpenVPN tunnels and disable the Wireguard to see if that corrects this.

                                Hi @Jarhead - I am using Wireguard, but it's not going through the Chelsio card on the WAN side. I'm curious, did you also end up trying a different SFP/SFP+ transceiver to see if that might make a difference?

                                J 1 Reply Last reply Reply Quote 0
                                • J
                                  Jarhead @tman222
                                  last edited by

                                  @tman222
                                  I did. Actually went to copper SFP's and still had the same issues.
                                  I thought of Wireguard because there was a known problem with Wireguard and Chelsio but I thought that was fixed with either 2.6 or 2.7, can't remember which. But when I did the upgrade to 2.7.1 I also lost 2 of my 3 Wireguard tunnels.
                                  Haven't had a chance to go any further into this and probably won't for a while. I have four gig ports that I am using now instead of the Chelsio.

                                  1 Reply Last reply Reply Quote 0
                                  • First post
                                    Last post
                                  Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.