Routing/INterface/Gateway issues after updating from CE 2.7 -> 2.71
-
@digdug3 said in Routing/INterface/Gateway issues after updating from CE 2.7 -> 2.71:
Missing interface 'opt1' for rule 'LAN to OPT1'nat on $PRIVATEVPN inet from 192.168.14.0/24 to any -> 10.32.x.x/32 port 1024:65535 # VLANVPN to PRIVATEVPN
Aha, looks like a missing
/nsomewhere. Hmmm -
Did you have outbound NAT in manual mode? In hybrid mode the auto rules should still have translated that.
-
Added a bug to track: https://redmine.pfsense.org/issues/15024
-
@stephenw10 I've always had them in "Hybrid Outbound NAT" mode.
-
Hmm, then I would have expected the auto rules to apply that translation even if the manual rule you added was not being applied.
Do you see an equivalent rule in the listed out OBN rules?
-
@stephenw10 Just checked the OBN rules again and the VPN nat rule was added manually (years ago):
No other rules were commented out. -
If it's in hybrid mode though you should also have auto rules added for the VLANVPN subnet on the PrivateVPN interface. They should be shown below the manual rules.
-
@stephenw10 No, they aren't, probably because the VPN client has "Don't pull routes" checked. I also only want these rules for two of my subnets, not all of them.
Next "issue" I found was when deleting an interface the manual created OBN rule wasn't removed (just like the firewall rules). It should be easy to replicate.
And last, the comment in the debug said "missing interface", shouldn't it be "disabled interface" when the interface is disabled?
"missing" is more correct when the interface is deleted but the manual OBN rule is still there. -
The pf process doesn't see any difference between disabled or entirely removed interfaces. It just sees referenced to an interface that isn't defined.
It is interesting that it's not removed like a firewall rule would be though.
-
@stephenw10 At least it's fixed now for me and looks like the missing
/nafter the "missing interface" comment was the culprit.
