after recent update
-
I updated yesterday, and when i tried to log into the GUI it gave me a gateway error. I connected to the COM and it just shows me this and doesnt ever show the selections to reset.
GDB: current port: uart KDB: debugger backends: ddb gdb KDB: current backend: ddb WARNING: DTB version is 6.4 while kernel expects 5.13, please update the DTB in the ESP Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.0-CURRENT #1 plus-RELENG_23_05_1-n256108-459fc493a87: Wed Jun 28 04:25:15 UTC 2023 root@freebsd:/var/jenkins/workspace/pfSense-Plus-snapshots-23_05_1-main/obj/aarch64/0P4W6joa/var/jenkins/workspace/pfSense-Plus-snapshots-23_05_1-main/sources/FreeBSD-src-plus-RELENG_23_05_1/arm64.aarch64/sys/pfSense arm64 FreeBSD clang version 15.0.7 (https://github.com/llvm/llvm-project.git llvmorg-15.0.7-0-g8dfdcc7b7bf6) VT: init without driver. module scmi already present! module firmware already present! real memory = 1073680384 (1023 MB) avail memory = 978268160 (932 MB) random: unblocking device. random: entropy device external interface ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xffff000000252de4, 0) error 1 ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffff000000252e90, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffff000000252f3c, 0) error 1 iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_bss_fw, 0xffff000000252fe8, 0) error 1 wlan: mac acl policy registered iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffff000000253094, 0) error 1 iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffff000000253140, 0) error 1 MAP 8000000 mode 2 pages 6 MAP 3e61f000 mode 2 pages 1 MAP 3ffc6000 mode 2 pages 1 kbd0 at kbdmux0 ofwbus0: <Open Firmware Device Tree> simplebus0: <Flattened device tree simple bus> on ofwbus0 simplebus1: <Flattened device tree simple bus> on simplebus0 simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0x13800-0x138ff,0x13c00-0x13c1f on simplebus1 simple_mfd1: <Simple MFD (Multi-Functions Device)> mem 0x18800-0x188ff,0x18c00-0x18c1f on simplebus1 psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 netgate0: <Netgate 1100> gic0: <ARM Generic Interrupt Controller v3.0> mem 0x1d00000-0x1d0ffff,0x1d40000-0x1d7ffff,0x1d80000-0x1d81fff,0x1d90000-0x1d91fff,0x1da0000-0x1dbffff irq 28 on simplebus1 gpio0: <Armada 37x0 North Bridge GPIO Controller> mem 0x13800-0x138ff,0x13c00-0x13c1f irq 29,30,31,32,33,34,35,36,37,38,39,40 on simple_mfd0 gpiobus0: <OFW GPIO bus> on gpio0 gpio1: <Armada 37x0 South Bridge GPIO Controller> mem 0x18800-0x188ff,0x18c00-0x18c1f irq 41,42,43,44,45 on simple_mfd1 gpiobus1: <OFW GPIO bus> on gpio1 gpioregulator0: <GPIO controlled regulator> on ofwbus0 a37x0-xtal0: <Marvell Armada 3700 Oscillator> mem 0x13800-0x138ff,0x13c00-0x13c1f on simple_mfd0 generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0 Timecounter "ARM MPCore Timecounter" frequency 12500000 Hz quality 1000 Event timer "ARM MPCore Eventtimer" frequency 12500000 Hz quality 1000 a37x0_tbg0: <Marvell Armada 3700 time base generators> mem 0x13200-0x132ff on simplebus1 a37x0_nb_periph_driver0: <marvell,armada-3700-nb-periph-clock> mem 0x13000-0x130ff on simplebus1 a37x0_sb_periph_driver0: <marvell,armada-3700-sb-periph-clock> mem 0x18000-0x180ff on simplebus1 cpulist0: <Open Firmware CPU Group> on ofwbus0 cpu0: <Open Firmware CPU> on cpulist0 cpu1: <Open Firmware CPU> on cpulist0 pmu0: <Performance Monitoring Unit> irq 4 on ofwbus0 spi0: <Armada 37x0 SPI controller> mem 0x10600-0x10fff irq 6 on simplebus1 iichb0: <Marvell Armada 37x0 IIC controller> mem 0x11000-0x11023 irq 7 on simplebus1 iicbus0: <OFW I2C bus> on iichb0 iic0: <I2C generic I/O> on iicbus0 uart0: <Marvell Armada 3700 UART> mem 0x12000-0x12017 irq 9,10,11 on simplebus1 uart0: console (115200,n,8,1) gpioc0: <GPIO controller> on gpio0 gpioc1: <GPIO controller> on gpio1 mvneta0: <NETA controller> mem 0x30000-0x33fff irq 14 on simplebus1 mvneta0: version is 10 mdio0: <MDIO> on mvneta0 mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0 e6000sw0: <Marvell 88E6341> on mdio0 e6000sw0: multi-chip addressing mode (0x1) e6000sw0: CPU port at 0 e6000sw0: fixed port at 0 e6000sw0: PHY at port 1 miibus0: <MII bus> on e6000sw0 e1000phy0: <Marvell 88E1000 Gigabit PHY> PHY 17 on miibus0 e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto e6000sw0: PHY at port 2 miibus1: <MII bus> on e6000sw0 e1000phy1: <Marvell 88E1000 Gigabit PHY> PHY 18 on miibus1 e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto e6000sw0: PHY at port 3 miibus2: <MII bus> on e6000sw0 e1000phy2: <Marvell 88E1000 Gigabit PHY> PHY 19 on miibus2 e1000phy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto e6000sw0: switch is ready. etherswitch0: <Switch controller> on e6000sw0 mvneta0: Ethernet address: f0:ad:4e:20:77:62 xhci0: <Generic USB 3.0 controller> mem 0x58000-0x5bfff irq 16 on simplebus1 xhci0: 32 bytes context size, 32-bit DMA usbus0 on xhci0 ehci0: <Marvell Integrated USB 2.0 controller> mem 0x5e000-0x5efff irq 17 on simplebus1 usbus1: EHCI version 1.0 usbus1 on ehci0 sdhci_xenon0: <Armada Xenon SDHCI controller> mem 0xd0000-0xd02ff,0x1e808-0x1e80b irq 25 on simplebus1 sdhci_xenon1: <Armada Xenon SDHCI controller> mem 0xd8000-0xd82ff,0x17808-0x1780b irq 26 on simplebus1 mmc0: <MMC/SD bus> on sdhci_xenon1 ahci0: <AHCI SATA controller> mem 0xe0000-0xe0177 irq 27 on simplebus1 ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with FBS ahcich0: <AHCI channel> at channel 0 on ahci0 device_attach: ahcich0 attach returned 6 pcib0: <Marvell Armada 3700 PCIe Bus Controller> mem 0xd0070000-0xd008ffff irq 5 on simplebus0 pcib0: link never came up pci0: <OFW PCI bus> on pcib0 gpioled0: <GPIO LEDs> on ofwbus0 armv8crypto0: <AES-CBC,AES-XTS,AES-GCM> Timecounters tick every 1.000 msec mvneta0: link state changed to UP ZFS filesystem version: 5 ZFS storage pool version: features support (5000) [nl_generic_kpi] genl_register_family: Registered family nlctrl id 16 [nl_generic_kpi] genl_register_cmds: Adding cmd GETFAMILY(3) to family nlctrl usbus0: 5.0Gbps Super Speed USB v3.0 usbus1: 480Mbps High Speed USB v2.0 [nl_generic_kpi] genl_register_family: Registered family carp id 17 [nl_generic_kpi] genl_register_cmds: Adding cmd SIOCGVH(1) to family carp [nl_generic_kpi] genl_register_cmds: Adding cmd SIOCSVH(2) to family carp ugen0.1: <Generic XHCI root HUB> at usbus0 uhub0 on usbus0 uhub0: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ugen1.1: <Marvell EHCI root HUB> at usbus1 uhub1 on usbus1 uhub1: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 spibus0: <OFW SPI bus> on spi0 mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0 mx25l0: device type mx25u3235f, size 4096K in 64 sectors of 64K, erase size 4K mmc0: Failed to set VCCQ for card at relative address 2 mmcsd0: 8GB <MMCHC DG4008 0.1 SN 17F71F05 MFG 04/2018 by 69 0x0000> at mmc0 50.0MHz/8bit/65535-block mmcsd0boot0: 4MB partition 1 at mmcsd0 mmcsd0boot1: 4MB partition 2 at mmcsd0 mmcsd0rpmb: 4MB partition 3 at mmcsd0 CPU 0: ARM Cortex-A53 r0p4 affinity: 0 Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL> Instruction Set Attributes 1 = <> Instruction Set Attributes 2 = <> Processor Features 0 = <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32> Processor Features 1 = <> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> Memory Model Features 1 = <8bit VMID> Memory Model Features 2 = <32bit CCIDX,48bit VA> Debug Features 0 = <DoubleLock,2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8> Debug Features 1 = <> Auxiliary Features 0 = <> Auxiliary Features 1 = <> AArch32 Instruction Set Attributes 5 = <CRC32,SHA2,SHA1,AES+VMULL,SEVL> AArch32 Media and VFP Features 0 = <FPRound,FPSqrt,FPDivide,DP VFPv3+v4,SP VFPv3+v4,AdvSIMD> AArch32 Media and VFP Features 1 = <SIMDFMAC,FPHP DP Conv,SIMDHP SP Conv,SIMDSP,SIMDInt,SIMDLS,FPDNaN,FPFtZ> TCP_ratelimit: Is now initialized Trying to mount root from zfs:pfSense/ROOT/default []... uhub0: 2 ports with 2 removable, self powered e6000sw0port1: link state changed to DOWN e6000sw0port2: link state changed to DOWN e6000sw0port3: link state changed to DOWN uhub1: 1 port with 1 removable, self powered Root mount waiting for: CAM Root mount waiting for: CAM e6000sw0port2: link state changed to UP Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Warning: no time-of-day clock registered, system time will not be set accurately No suitable dump device was found. Setting hostuuid: 11bfe1eb-65b4-4f54-bfdc-71849cb992c0. Setting hostid: 0x6a1c9448. Starting file system checks: Generating host.conf. Mounting local filesystems:. Generating MFS /var partition /etc/rc.d/varmfs: bsdlabel: not found Generating MFS /etc partition /etc/rc.d/etcmfs: bsdlabel: not found Local package initialization:ERROR: Config file not found ERROR: Config file not found . /etc/rc: WARNING: $hostname is not set -- see rc.conf(5). Setting up harvesting: [CALLOUT],[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED Feeding entropy: . lo0: link state changed to UP Starting Network: lo0 mvneta0 enc0. lo0: flags=1008049<UP,LOOPBACK,RUNNING,MULTICAST,LOWER_UP> metric 0 mtu 16384 lladdr inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7 groups: lo nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> mvneta0: flags=1008a02<BROADCAST,ALLMULTI,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500 ether f0:ad:4e:20:77:62 media: Ethernet 1000baseT <full-duplex> status: active nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> enc0: flags=0 metric 0 mtu 1536 lladdr groups: enc nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> add host 127.0.0.1: gateway lo0 add host ::1: gateway lo0 fib 0: route already in table add net fe80::: gateway ::1 add net ff02::: gateway ::1 add net ::ffff:0.0.0.0: gateway ::1 add net ::0.0.0.0: gateway ::1 ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/lib/engines /usr/local/lib/compat/pkg /usr/local/lib/ipsec /usr/local/lib/perl5/5.32/mach/CORE 32-bit compatibility ldconfig path: Starting devd. Starting Network: mvneta0. mvneta0: flags=1008a02<BROADCAST,ALLMULTI,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500 ether f0:ad:4e:20:77:62 media: Ethernet 1000baseT <full-duplex> status: active nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> Starting Network: enc0. enc0: flags=0 metric 0 mtu 1536 lladdr groups: enc nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> Creating and/or trimming log files. Updating /var/run/os-release done. Updating motd:. Clearing /tmp (X related). Starting syslogd. /etc/rc: WARNING: $timed_enable is not set properly - see rc.conf(5). Mounting late filesystems:. /etc/rc: WARNING: $sshguard_enable is not set properly - see rc.conf(5). /etc/rc: WARNING: $scponlyc_enable is not set properly - see rc.conf(5). Starting cron. Starting background file system checks in 60 seconds. Wed Dec 31 18:00:26 CST 1969 FreeBSD/arm64 (Amnesiac) (ttyu0) -sh: /etc/rc.initial: not found FreeBSD/arm64 (Amnesiac) (ttyu0) -sh: /etc/rc.initial: not found FreeBSD/arm64 (Amnesiac) (ttyu0) -sh: /etc/rc.initial: not found FreeBSD/arm64 (Amnesiac) (ttyu0) -sh: /etc/rc.initial: not found FreeBSD/arm64 (Amnesiac) (ttyu0) -sh: /etc/rc.initial: not found FreeBSD/arm64 (Amnesiac) (ttyu0) -sh: /etc/rc.initial: not found FreeBSD/arm64 (Amnesiac) (ttyu0) -sh: /etc/rc.initial: not found FreeBSD/arm64 (Amnesiac) (ttyu0) -sh: /etc/rc.initial: not found FreeBSD/arm64 (Amnesiac) (ttyu0) -sh: /etc/rc.initial: not foundThanks for any help,
Luis M.
-
@lmoure said in after recent update:
plus-RELENG_23_05_1
Doesn't seem like it updated. Your fastest way back is probably to reinstall and restore your config file from backup. Is that a 3100?
https://docs.netgate.com/pfsense/en/latest/solutions/sg-3100/reinstall-pfsense.html
(free ticket for image)
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.