OpenVPN does not work on bridged PFsense router
-
pfSense should be the server, I think tunnelblick is being used as a server and that is causing the issues, as this is the device you are connecting to and that is the issue
-
Not at all, I am not using Tunnelblick as a server, also, I followed that exact blog/video you shared to set up my VPN.
I downloaded the config from the VPN exporter and installed it correctly on both tunnelblick and viscosity, both output the same error.
-
@george1116 Can you connect to just the firewall without using Tunnelblick?
Can you use just OpenVPN software
Using
openvpn.net/client/ -
@JonathanLee said in OpenVPN does not work on bridged PFsense router:
openvpn.net/client/
Same thing here.
-
@george1116 Just to confirm are you using the user profile you created in pfsense to log on?
-
Yes, I am. I am sure this issue has nothing to do with the credentials because it already works, I can verify it on another network.
-
@george1116 interesting, does the equipment in front of pfSense have any logs you can get to?
-
No logs, the device comes from my ISP, and because I already set that device to bridge the LAN port it doesn't show any details about connected LAN devices either.
-
My set up works like this DSL modem has 4 ports, one port goes to my power over AC over to the other side of the house the second power over AC plugs into my firewall wan port modem is gives my firewall a wan address after I have my AP plugged into the lan of the firewall.
ISP dmark——>dsl modem——>firewall—->access point
I vpn onto the firewall with my static wan address, my IP address has not changed in years. I can see it connect into the firewall on the openVPN tab it shows states, after I have rules for what the vpn can access, it can only access my NAS.
Does yours do this? I think you said you have this,
ISP dmark——>modem——->router——->firewall bridged——>iMac you want to access
You’re gonna need to set a default route for that traffic on your router. Can you ping the iMac from the router?
-
This post is deleted! -
@george1116 said in OpenVPN does not work on bridged PFsense router:
My pfsense router is installed behind my home router, the LAN port on my home router which pfsense is connected to is set in bridged mode, so my pfsense WAN side is getting a public IP in the 199.x.x.x.x range.
I then installed openVPN on my pfsense router, but when I am connected directly to my home router (the bridged router) openVPN is not able to connect, however, when I connect via tethering to my mobile device hotstpo OpenVPN connects successfully.
What is the error I am getting:
When connecting to openVPN I get the below error message after some time.2024-01-03 08:30:08.123554 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity) 2024-01-03 08:30:08.123640 TLS Error: TLS handshake failedWhat have I checked:
- I checked my home router to see if port 1194 is blocked, and it isn't
- I verified that my pfsene router WAN side is indeed getting a public IP and it is.
- I ensured there is no double NATing, this is evident from the public IP on pfsense WAN
- I used Packet Capture to verify that indeed there was an outbound connection from my machine to pfsense router, and there was.
- I changed the Tunnel Network of OpenVPN, but it didn't help
- I used different authentication Modes, but it didn't work
I have been going on for 2 days now, has anyone experienced this or knows what the problem could be
I think the router in front of your firewall is causing the issues, is this a standard ISP issued router with a dmark or a modem?
