Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    There were error(s) loading the rules: pfctl: DIOCADDRULENV: Device busy

    General pfSense Questions
    6
    59
    4.6k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • A
      a.dresner @stephenw10
      last edited by stephenw10

      @stephenw10 Thanks! Here you go ... some time before and after the error. I don't have any IPSEC or OPENVPN tunnels anymore. only wireguard.

      Jan 7 05:38:13	php-fpm	17629	/rc.openvpn: The command '/sbin/route -n6 get 'default' 2>/dev/null | /usr/bin/egrep 'flags: <.*PROTO.*>'' returned exit code '1', the output was ''
Jan 7 05:38:13	xinetd	64582	Starting reconfiguration
Jan 7 05:38:13	xinetd	64582	Swapping defaults
Jan 7 05:38:13	xinetd	64582	readjusting service 6969-udp
Jan 7 05:38:13	xinetd	64582	Reconfigured: new=0 old=1 dropped=0 (services)
Jan 7 05:39:23	rc.gateway_alarm	48978	>>> Gateway alarm: WG_VPN_HQ (Addr:10.100.92.1 Alarm:1 RTT:248.908ms RTTsd:35.048ms Loss:22%)
Jan 7 05:39:23	check_reload_status	446	updating dyndns WG_VPN_HQ
Jan 7 05:39:23	check_reload_status	446	Restarting IPsec tunnels
Jan 7 05:39:23	check_reload_status	446	Restarting OpenVPN tunnels/interfaces
Jan 7 05:39:23	check_reload_status	446	Reloading filter
Jan 7 05:39:24	php-fpm	406	/rc.openvpn: The command '/sbin/route -n6 get 'default' 2>/dev/null | /usr/bin/egrep 'flags: <.*PROTO.*>'' returned exit code '1', the output was ''
Jan 7 05:39:25	xinetd	64582	Starting reconfiguration
Jan 7 05:39:25	xinetd	64582	Swapping defaults
Jan 7 05:39:25	xinetd	64582	readjusting service 6969-udp
Jan 7 05:39:25	xinetd	64582	Reconfigured: new=0 old=1 dropped=0 (services)
Jan 7 05:41:00	rc.gateway_alarm	76323	>>> Gateway alarm: WG_VPN_HQ (Addr:10.100.92.1 Alarm:0 RTT:236.369ms RTTsd:9.695ms Loss:11%)
Jan 7 05:41:00	check_reload_status	446	updating dyndns WG_VPN_HQ
Jan 7 05:41:00	check_reload_status	446	Restarting IPsec tunnels
Jan 7 05:41:00	check_reload_status	446	Restarting OpenVPN tunnels/interfaces
Jan 7 05:41:00	check_reload_status	446	Reloading filter
Jan 7 05:41:01	php-fpm	88896	/rc.openvpn: The command '/sbin/route -n6 get 'default' 2>/dev/null | /usr/bin/egrep 'flags: <.*PROTO.*>'' returned exit code '1', the output was ''
Jan 7 05:41:01	xinetd	64582	Starting reconfiguration
Jan 7 05:41:01	xinetd	64582	Swapping defaults
Jan 7 05:41:01	xinetd	64582	readjusting service 6969-udp
Jan 7 05:41:01	xinetd	64582	Reconfigured: new=0 old=1 dropped=0 (services)
Jan 7 05:57:50	rc.gateway_alarm	60059	>>> Gateway alarm: WG_VPN_HQ (Addr:10.100.92.1 Alarm:1 RTT:250.866ms RTTsd:23.135ms Loss:21%)
Jan 7 05:57:50	check_reload_status	446	updating dyndns WG_VPN_HQ
Jan 7 05:57:50	check_reload_status	446	Restarting IPsec tunnels
Jan 7 05:57:50	check_reload_status	446	Restarting OpenVPN tunnels/interfaces
Jan 7 05:57:50	check_reload_status	446	Reloading filter
Jan 7 05:57:51	php-fpm	17629	/rc.openvpn: The command '/sbin/route -n6 get 'default' 2>/dev/null | /usr/bin/egrep 'flags: <.*PROTO.*>'' returned exit code '1', the output was ''
Jan 7 05:57:52	xinetd	64582	Starting reconfiguration
Jan 7 05:57:52	xinetd	64582	Swapping defaults
Jan 7 05:57:52	xinetd	64582	readjusting service 6969-udp
Jan 7 05:57:52	xinetd	64582	Reconfigured: new=0 old=1 dropped=0 (services)
Jan 7 05:59:10	rc.gateway_alarm	84513	>>> Gateway alarm: WG_VPN_HQ (Addr:10.100.92.1 Alarm:0 RTT:238.124ms RTTsd:16.477ms Loss:11%)
Jan 7 05:59:10	check_reload_status	446	updating dyndns WG_VPN_HQ
Jan 7 05:59:10	check_reload_status	446	Restarting IPsec tunnels
Jan 7 05:59:10	check_reload_status	446	Restarting OpenVPN tunnels/interfaces
Jan 7 05:59:10	check_reload_status	446	Reloading filter
Jan 7 05:59:11	php-fpm	406	/rc.openvpn: The command '/sbin/route -n6 get 'default' 2>/dev/null | /usr/bin/egrep 'flags: <.*PROTO.*>'' returned exit code '1', the output was ''
Jan 7 05:59:11	xinetd	64582	Starting reconfiguration
Jan 7 05:59:11	xinetd	64582	Swapping defaults
Jan 7 05:59:11	xinetd	64582	readjusting service 6969-udp
Jan 7 05:59:11	xinetd	64582	Reconfigured: new=0 old=1 dropped=0 (services)
Jan 7 06:08:52	rc.gateway_alarm	92876	>>> Gateway alarm: WG_VPN_HQ (Addr:10.100.92.1 Alarm:1 RTT:242.686ms RTTsd:17.076ms Loss:21%)
Jan 7 06:08:52	check_reload_status	446	updating dyndns WG_VPN_HQ
Jan 7 06:08:52	check_reload_status	446	Restarting IPsec tunnels
Jan 7 06:08:52	check_reload_status	446	Restarting OpenVPN tunnels/interfaces
Jan 7 06:08:52	check_reload_status	446	Reloading filter
Jan 7 06:08:53	php-fpm	88896	/rc.openvpn: The command '/sbin/route -n6 get 'default' 2>/dev/null | /usr/bin/egrep 'flags: <.*PROTO.*>'' returned exit code '1', the output was ''
Jan 7 06:08:53	xinetd	64582	Starting reconfiguration
Jan 7 06:08:53	xinetd	64582	Swapping defaults
Jan 7 06:08:53	xinetd	64582	readjusting service 6969-udp
Jan 7 06:08:53	xinetd	64582	Reconfigured: new=0 old=1 dropped=0 (services)
Jan 7 06:08:55	php-fpm	91599	/rc.filter_configure_sync: New alert found: PF was wedged/busy and has been reset.
Jan 7 06:08:55	php-fpm	91599	/rc.filter_configure_sync: New alert found: There were error(s) loading the rules: pfctl: DIOCADDRULENV: Device busy - The line in question reads [0]:
Jan 7 06:09:00	sshguard	98299	Exiting on signal.
Jan 7 06:09:00	sshguard	76217	Now monitoring attacks.
Jan 7 06:10:04	rc.gateway_alarm	48087	>>> Gateway alarm: WG_VPN_HQ (Addr:10.100.92.1 Alarm:0 RTT:248.487ms RTTsd:33.009ms Loss:16%)
Jan 7 06:10:04	check_reload_status	446	updating dyndns WG_VPN_HQ
Jan 7 06:10:04	check_reload_status	446	Restarting IPsec tunnels
Jan 7 06:10:04	check_reload_status	446	Restarting OpenVPN tunnels/interfaces
Jan 7 06:10:04	check_reload_status	446	Reloading filter
Jan 7 06:10:06	php-fpm	405	/rc.openvpn: The command '/sbin/route -n6 get 'default' 2>/dev/null | /usr/bin/egrep 'flags: <.*PROTO.*>'' returned exit code '1', the output was ''
Jan 7 06:10:06	xinetd	64582	Starting reconfiguration
Jan 7 06:10:06	xinetd	64582	Swapping defaults
Jan 7 06:10:06	xinetd	64582	readjusting service 6969-udp
Jan 7 06:10:06	xinetd	64582	Reconfigured: new=0 old=1 dropped=0 (services)
Jan 7 06:13:00	rc.gateway_alarm	27686	>>> Gateway alarm: WG_VPN_HQ (Addr:10.100.92.1 Alarm:1 RTT:252.683ms RTTsd:37.094ms Loss:21%)
Jan 7 06:13:00	check_reload_status	446	updating dyndns WG_VPN_HQ
Jan 7 06:13:00	check_reload_status	446	Restarting IPsec tunnels
Jan 7 06:13:00	check_reload_status	446	Restarting OpenVPN tunnels/interfaces
Jan 7 06:13:00	check_reload_status	446	Reloading filter
Jan 7 06:13:01	php-fpm	406	/rc.openvpn: The command '/sbin/route -n6 get 'default' 2>/dev/null | /usr/bin/egrep 'flags: <.*PROTO.*>'' returned exit code '1', the output was ''
Jan 7 06:13:01	xinetd	64582	Starting reconfiguration
Jan 7 06:13:01	xinetd	64582	Swapping defaults
Jan 7 06:13:01	xinetd	64582	readjusting service 6969-udp
Jan 7 06:13:01	xinetd	64582	Reconfigured: new=0 old=1 dropped=0 (services)
Jan 7 06:14:14	rc.gateway_alarm	87919	>>> Gateway alarm: WG_VPN_HQ (Addr:10.100.92.1 Alarm:0 RTT:235.090ms RTTsd:4.383ms Loss:14%)
Jan 7 06:14:14	check_reload_status	446	updating dyndns WG_VPN_HQ
Jan 7 06:14:14	check_reload_status	446	Restarting IPsec tunnels
Jan 7 06:14:14	check_reload_status	446	Restarting OpenVPN tunnels/interfaces
Jan 7 06:14:14	check_reload_status	446	Reloading filter
Jan 7 06:14:15	php-fpm	88896	/rc.openvpn: The command '/sbin/route -n6 get 'default' 2>/dev/null | /usr/bin/egrep 'flags: <.*PROTO.*>'' returned exit code '1', the output was ''
Jan 7 06:14:16	xinetd	64582	Starting reconfiguration
      1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by

        And you've only seen that one time so far?

        A 1 Reply Last reply Reply Quote 0
        • A
          a.dresner @stephenw10
          last edited by

          @stephenw10 Yes sir, just this single time. With that said, this is my only 6100 (I have 3) that has crashed and was replaced once.

          1 Reply Last reply Reply Quote 0
          • stephenw10S
            stephenw10 Netgate Administrator
            last edited by

            Hmm, nothing really logged there. I generally don't like to see xinetd running if possible but just one service running there isn't likely to be causing a problem. It's usually a sign that NAT refection with NAT+Proxy is enabled and that is almost never required.
            Potentially it was just a timing issue with several processes trying to make changes to pf.

            A 1 Reply Last reply Reply Quote 0
            • A
              a.dresner @stephenw10
              last edited by

              @stephenw10 Thank you, I cleaned up the NAT settings (set to Auto) and removed an old VLAN that I'm not using any longer. However I am still seeing this:
              Jan 9 14:35:47 php-fpm 405 /rc.openvpn: The command '/sbin/route -n6 get 'default' 2>/dev/null | /usr/bin/egrep 'flags: <.PROTO.>'' returned exit code '1', the output was ''

              Looking at my other 6100 logs, where I used to also have openvpn, and don't see this.

              1 Reply Last reply Reply Quote 0
              • stephenw10S
                stephenw10 Netgate Administrator
                last edited by

                Do you have any OpenVPN servers or clients defined at all?

                A 1 Reply Last reply Reply Quote 0
                • A
                  a.dresner @stephenw10
                  last edited by

                  @stephenw10 I have nothing configured under OpenVPN, I moved to Wireguard over a year ago.

                  1 Reply Last reply Reply Quote 0
                  • stephenw10S
                    stephenw10 Netgate Administrator
                    last edited by

                    Hmm, maybe you have a manually defined gateway for an OpenVPN interface that no longer exists?

                    Do you see that error if you run /etc/rc.openvpn manually?

                    A 1 Reply Last reply Reply Quote 0
                    • A
                      a.dresner @stephenw10
                      last edited by a.dresner

                      @stephenw10 Thank you sir, I ran /etc/rc.openvpn from a shell and nothing happened at the shell and I don't see anything in the general logs. But this sounds possible since I had a lot of OpenVPN settings at one time.

                      looking more specifically at the OpenVPN logs:

                      May 8 07:54:11 openvpn 45396 /sbin/ifconfig ovpns1 10.0.21.1 10.0.21.2 mtu 1500 netmask 255.255.255.0 up
                      May 8 07:54:11 openvpn 45396 /usr/local/sbin/ovpn-linkup ovpns1 1500 0 10.0.21.1 255.255.255.0 init
                      May 8 07:54:11 openvpn 45396 UDPv4 link local (bound): [AF_INET]77.154.17.160:1194
                      May 8 07:54:11 openvpn 45396 UDPv4 link remote: [AF_UNSPEC]
                      May 8 07:54:11 openvpn 45396 Initialization Sequence Completed
                      May 8 12:19:07 openvpn 45396 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]71.6.134.237:44342
                      May 8 15:12:42 openvpn 45396 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]185.200.116.82:57514
                      May 8 21:28:29 openvpn 45396 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]146.88.240.4:45635
                      May 8 23:24:32 openvpn 45396 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]205.210.31.50:53598
                      May 8 23:44:21 openvpn 45396 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]139.162.243.169:47215
                      May 9 01:17:22 openvpn 45396 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]167.94.138.106:10178
                      May 9 02:47:54 openvpn 45396 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]185.200.116.68:49366
                      May 9 14:34:56 openvpn 45396 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]89.248.168.36:44273
                      May 9 15:48:59 openvpn 45396 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]38.132.109.167:40381
                      May 9 18:01:54 openvpn 45396 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]198.235.24.251:52897
                      May 9 21:24:18 openvpn 45396 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]146.88.240.4:40052
                      May 10 03:59:19 openvpn 45396 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]38.132.109.164:51607
                      May 10 14:52:23 openvpn 45396 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]209.159.153.66:36429
                      May 10 15:07:49 openvpn 45396 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]185.200.116.86:59315
                      May 10 18:39:39 openvpn 45396 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]198.235.24.249:50765
                      May 10 21:29:04 openvpn 45396 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]146.88.240.4:46754
                      May 11 03:13:24 openvpn 45396 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]38.132.109.169:41486
                      May 11 15:14:22 openvpn 45396 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]185.200.116.67:46114
                      May 11 15:41:48 openvpn 45396 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]137.220.233.52:42501
                      May 11 21:31:28 openvpn 45396 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]146.88.240.4:46937
                      May 12 00:54:40 openvpn 45396 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]205.210.31.81:57090
                      May 12 02:04:50 openvpn 45396 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]209.159.153.66:36272
                      May 12 02:23:19 openvpn 45396 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]94.102.61.34:52550
                      May 12 02:44:31 openvpn 45396 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]38.132.109.166:52327
                      May 12 15:12:15 openvpn 45396 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]185.200.116.86:56789
                      May 12 15:56:30 openvpn 45396 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]199.195.248.205:32960
                      May 12 21:21:40 openvpn 45396 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]146.88.240.4:57996
                      May 12 23:44:22 openvpn 45396 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]205.210.31.226:56088
                      May 13 02:33:23 openvpn 45396 event_wait : Interrupted system call (fd=-1,code=4)
                      May 13 02:33:23 openvpn 45396 /usr/local/sbin/ovpn-linkdown ovpns1 1500 0 10.0.21.1 255.255.255.0 init
                      May 13 02:33:23 openvpn 45396 SIGTERM[hard,] received, process exiting
                      May 13 02:33:24 openvpn 60028 OpenVPN 2.6_git amd64-portbld-freebsd12.3 [SSL (OpenSSL)] [LZO] [LZ4] [MH/RECVDA] [AEAD] [DCO] built on Jun 4 2022
                      May 13 02:33:24 openvpn 60028 library versions: OpenSSL 1.1.1n-freebsd 15 Mar 2022, LZO 2.10
                      May 13 02:33:24 openvpn 60083 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
                      May 13 02:33:24 openvpn 60083 WARNING: experimental option --capath /var/etc/openvpn/server1/ca
                      May 13 02:33:24 openvpn 60083 TUN/TAP device ovpns1 exists previously, keep at program end
                      May 13 02:33:24 openvpn 60083 TUN/TAP device /dev/tun1 opened
                      May 13 02:33:24 openvpn 60083 /sbin/ifconfig ovpns1 10.0.21.1 10.0.21.2 mtu 1500 netmask 255.255.255.0 up
                      May 13 02:33:24 openvpn 60083 /usr/local/sbin/ovpn-linkup ovpns1 1500 0 10.0.21.1 255.255.255.0 init
                      May 13 02:33:24 openvpn 60083 UDPv4 link local (bound): [AF_INET]192.168.100.10:1194
                      May 13 02:33:24 openvpn 60083 UDPv4 link remote: [AF_UNSPEC]
                      May 13 02:33:24 openvpn 60083 Initialization Sequence Completed
                      May 13 02:33:46 openvpn 60083 event_wait : Interrupted system call (fd=-1,code=4)
                      May 13 02:33:46 openvpn 60083 /usr/local/sbin/ovpn-linkdown ovpns1 1500 0 10.0.21.1 255.255.255.0 init
                      May 13 02:33:46 openvpn 60083 SIGTERM[hard,] received, process exiting
                      May 13 02:33:47 openvpn 74832 OpenVPN 2.6_git amd64-portbld-freebsd12.3 [SSL (OpenSSL)] [LZO] [LZ4] [MH/RECVDA] [AEAD] [DCO] built on Jun 4 2022
                      May 13 02:33:47 openvpn 74832 library versions: OpenSSL 1.1.1n-freebsd 15 Mar 2022, LZO 2.10
                      May 13 02:33:47 openvpn 74970 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
                      May 13 02:33:47 openvpn 74970 WARNING: experimental option --capath /var/etc/openvpn/server1/ca
                      May 13 02:33:47 openvpn 74970 TUN/TAP device ovpns1 exists previously, keep at program end
                      May 13 02:33:47 openvpn 74970 TUN/TAP device /dev/tun1 opened
                      May 13 02:33:47 openvpn 74970 /sbin/ifconfig ovpns1 10.0.21.1 10.0.21.2 mtu 1500 netmask 255.255.255.0 up
                      May 13 02:33:47 openvpn 74970 /usr/local/sbin/ovpn-linkup ovpns1 1500 0 10.0.21.1 255.255.255.0 init
                      May 13 02:33:47 openvpn 74970 UDPv4 link local (bound): [AF_INET]77.154.17.160:1194
                      May 13 02:33:47 openvpn 74970 UDPv4 link remote: [AF_UNSPEC]
                      May 13 02:33:47 openvpn 74970 Initialization Sequence Completed
                      May 13 02:41:56 openvpn 74970 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]167.94.138.102:46606
                      May 13 03:21:15 openvpn 74970 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]38.132.109.112:51520
                      May 13 03:45:41 openvpn 74970 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]167.248.133.137:42977
                      May 13 15:05:27 openvpn 74970 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]185.200.118.41:58990
                      May 13 21:25:52 openvpn 74970 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]146.88.240.4:36818
                      May 13 21:57:47 openvpn 74970 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]205.210.31.163:52243
                      May 13 23:39:37 openvpn 74970 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]165.154.119.123:49481
                      May 14 03:42:15 openvpn 74970 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]185.200.118.39:40463
                      May 14 04:01:04 openvpn 74970 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]167.94.138.96:52973
                      May 14 08:06:11 openvpn 74970 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]45.83.67.253:19057
                      May 14 09:18:08 openvpn 74970 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]104.200.25.246:40505
                      May 14 15:34:44 openvpn 74970 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]185.200.118.48:42141
                      May 14 15:46:31 openvpn 74970 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]198.235.24.81:54644
                      May 14 19:57:34 openvpn 74970 event_wait : Interrupted system call (fd=-1,code=4)
                      May 14 19:57:34 openvpn 74970 /usr/local/sbin/ovpn-linkdown ovpns1 1500 0 10.0.21.1 255.255.255.0 init
                      May 14 19:57:34 openvpn 74970 SIGTERM[hard,] received, process exiting

                      1 Reply Last reply Reply Quote 0
                      • stephenw10S
                        stephenw10 Netgate Administrator
                        last edited by

                        Those are all very old. Those errors look like connection attempts from unknown clients. Unlikely to have caused this issue. Especially if running that did not reproduce the pf error in the general system log.

                        A 1 Reply Last reply Reply Quote 0
                        • A
                          a.dresner @stephenw10
                          last edited by

                          @stephenw10 sorry, I'm jet lagged and didn't even look at the dates. Ugh..

                          Here are the general logs after running that command at the shell:

                          Jan 10 21:27:45 php-fpm 406 /rc.openvpn: The command '/sbin/route -n6 get 'default' 2>/dev/null | /usr/bin/egrep 'flags: <.PROTO.>'' returned exit code '1', the output was ''
                          Jan 10 21:27:45 xinetd 63604 Starting reconfiguration
                          Jan 10 21:27:45 xinetd 63604 Swapping defaults
                          Jan 10 21:27:45 xinetd 63604 readjusting service 6969-udp
                          Jan 10 21:27:45 xinetd 63604 Reconfigured: new=0 old=1 dropped=0 (services)
                          Jan 10 21:28:39 rc.gateway_alarm 80695 >>> Gateway alarm: WG_VPN_HQ (Addr:10.100.92.1 Alarm:0 RTT:250.432ms RTTsd:20.860ms Loss:14%)
                          Jan 10 21:28:39 check_reload_status 446 updating dyndns WG_VPN_HQ
                          Jan 10 21:28:39 check_reload_status 446 Restarting IPsec tunnels
                          Jan 10 21:28:39 check_reload_status 446 Restarting OpenVPN tunnels/interfaces
                          Jan 10 21:28:39 check_reload_status 446 Reloading filter
                          Jan 10 21:28:40 php-fpm 405 /rc.openvpn: The command '/sbin/route -n6 get 'default' 2>/dev/null | /usr/bin/egrep 'flags: <.PROTO.>'' returned exit code '1', the output was ''
                          Jan 10 21:28:40 xinetd 63604 Starting reconfiguration
                          Jan 10 21:28:40 xinetd 63604 Swapping defaults
                          Jan 10 21:28:40 xinetd 63604 readjusting service 6969-udp
                          Jan 10 21:28:40 xinetd 63604 Reconfigured: new=0 old=1 dropped=0 (services)
                          Jan 10 21:40:13 rc.gateway_alarm 93364 >>> Gateway alarm: WG_VPN_HQ (Addr:10.100.92.1 Alarm:1 RTT:259.768ms RTTsd:29.231ms Loss:21%)
                          Jan 10 21:40:13 check_reload_status 446 updating dyndns WG_VPN_HQ
                          Jan 10 21:40:13 check_reload_status 446 Restarting IPsec tunnels
                          Jan 10 21:40:13 check_reload_status 446 Restarting OpenVPN tunnels/interfaces
                          Jan 10 21:40:13 check_reload_status 446 Reloading filter
                          Jan 10 21:40:15 php-fpm 28 /rc.openvpn: The command '/sbin/route -n6 get 'default' 2>/dev/null | /usr/bin/egrep 'flags: <.PROTO.>'' returned exit code '1', the output was ''
                          Jan 10 21:40:15 xinetd 63604 Starting reconfiguration
                          Jan 10 21:40:15 xinetd 63604 Swapping defaults
                          Jan 10 21:40:15 xinetd 63604 readjusting service 6969-udp
                          Jan 10 21:40:15 xinetd 63604 Reconfigured: new=0 old=1 dropped=0 (services)
                          Jan 10 21:40:57 rc.gateway_alarm 5473 >>> Gateway alarm: WG_VPN_HQ (Addr:10.100.92.1 Alarm:0 RTT:259.393ms RTTsd:31.093ms Loss:15%)
                          Jan 10 21:40:57 check_reload_status 446 updating dyndns WG_VPN_HQ
                          Jan 10 21:40:57 check_reload_status 446 Restarting IPsec tunnels
                          Jan 10 21:40:57 check_reload_status 446 Restarting OpenVPN tunnels/interfaces
                          Jan 10 21:40:57 check_reload_status 446 Reloading filter
                          Jan 10 21:40:58 php-fpm 406 /rc.openvpn: The command '/sbin/route -n6 get 'default' 2>/dev/null | /usr/bin/egrep 'flags: <.PROTO.>'' returned exit code '1', the output was ''
                          Jan 10 21:40:58 xinetd 63604 Starting reconfiguration
                          Jan 10 21:40:58 xinetd 63604 Swapping defaults
                          Jan 10 21:40:58 xinetd 63604 readjusting service 6969-udp
                          Jan 10 21:40:58 xinetd 63604 Reconfigured: new=0 old=1 dropped=0 (services)
                          Jan 10 21:41:00 sshguard 68209 Exiting on signal.
                          Jan 10 21:41:00 sshguard 76061 Now monitoring attacks.
                          Jan 10 21:47:35 php-fpm 28 /status_logs.php: Session timed out for user 'admin' from: 192.168.1.143 (Local Database)
                          Jan 10 21:47:45 php-fpm 28 /status_logs.php: Successful login for user 'admin' from: 192.168.1.143 (Local Database)
                          Jan 10 21:48:50 sshd 5970 Received disconnect from 192.168.1.143 port 64050:11: Normal Shutdown
                          Jan 10 21:48:50 sshd 5970 Disconnected from user admin 192.168.1.143 port 64050
                          Jan 10 21:49:21 sshd 55624 Accepted keyboard-interactive/pam for admin from 192.168.1.143 port 54238 ssh2

                          1 Reply Last reply Reply Quote 0
                          • stephenw10S
                            stephenw10 Netgate Administrator
                            last edited by

                            Hmm, no pf error then.

                            Without any openvpn config there shouldn't be anything triggered by running rc.openvpn.

                            I wonder if you still have any conf files remaining in /var/etc/openvpn?

                            A 2 Replies Last reply Reply Quote 0
                            • A
                              a.dresner @stephenw10
                              last edited by

                              @stephenw10 doesn't look like it

                              [23.09.1-RELEASE][admin@]/: cd /var/etc/openvpn
                              /var/etc/openvpn: No such file or directory.
                              [23.09.1-RELEASE][admin@                              ]/:

                              C 1 Reply Last reply Reply Quote 0
                              • C
                                clawsonn @a.dresner
                                last edited by

                                FYI
                                This week I just hit a similar issue where the PF machine ( Netgate pfSense Plus 23.09-RELEASE (amd64) ) was no longer smoothly pushing packets through and there was significant packet loss. After logging into webgui the notifications greeted with the following (date and time removed):

                                pf_busy

                                PF was wedged/busy and has been reset. @ -DATE TIME-
PF was wedged/busy and has been reset. @ -DATE TIME-

                                Filter Reload

                                There were error(s) loading the rules: pfctl: DIOCADDRULENV: Device busy - The line in question reads [0]: @ -DATE TIME-
There were error(s) loading the rules: pfctl: DIOCADDRULENV: Device busy - The line in question reads [0]: @ -DATE TIME-
There were error(s) loading the rules: pfctl: SIOCGIFGROUP: Device not configured - The line in question reads [0]: @ -DATE TIME-

                                The machine was rebooted and appears to functioning normal again.

                                When I have the time I will try to pull and review logs.

                                A 1 Reply Last reply Reply Quote 0
                                • C clawsonn referenced this topic on
                                • A
                                  a.dresner @clawsonn
                                  last edited by

                                  @clawsonn My situation has not improved. My notices:

                                  pf_busy
                                  • PF was wedged/busy and has been reset. @ 2024-01-25 04:54:20
                                  • PF was wedged/busy and has been reset. @ 2024-01-28 20:04:22
                                  • PF was wedged/busy and has been reset. @ 2024-01-30 02:24:22
                                  • PF was wedged/busy and has been reset. @ 2024-03-06 07:54:55
                                  • PF was wedged/busy and has been reset. @ 2024-03-15 08:14:59
                                  • PF was wedged/busy and has been reset. @ 2024-03-21 09:15:02
                                  • PF was wedged/busy and has been reset. @ 2024-03-23 20:45:03
                                  • PF was wedged/busy and has been reset. @ 2024-03-24 06:50:04
                                  Filter Reload
                                  • There were error(s) loading the rules: pfctl: DIOCADDRULENV: Device busy - The line in question reads [0]: @ 2024-01-25 04:54:21
                                  • There were error(s) loading the rules: pfctl: DIOCADDRULENV: Device busy - The line in question reads [0]: @ 2024-01-28 20:04:23
                                  • There were error(s) loading the rules: pfctl: DIOCADDRULENV: Device busy - The line in question reads [0]: @ 2024-01-30 02:24:23
                                  • There were error(s) loading the rules: pfctl: DIOCADDRULENV: Device busy - The line in question reads [0]: @ 2024-03-06 07:54:56
                                  • There were error(s) loading the rules: pfctl: DIOCADDRULENV: Device busy - The line in question reads [0]: @ 2024-03-15 08:15:00
                                  • There were error(s) loading the rules: pfctl: DIOCADDRULENV: Device busy - The line in question reads [0]: @ 2024-03-21 09:15:03
                                  • There were error(s) loading the rules: pfctl: DIOCADDRULENV: Device busy - The line in question reads [0]: @ 2024-03-23 20:45:04
                                  • There were error(s) loading the rules: pfctl: DIOCADDRULENV: Device busy - The line in question reads [0]: @ 2024-03-24 06:50:05

                                  This should not be happening.

                                  1 Reply Last reply Reply Quote 0
                                  • A
                                    a.dresner @stephenw10
                                    last edited by

                                    @stephenw10 Would be great if you could take a look at this, its happening quite consistently now

                                    1 Reply Last reply Reply Quote 0
                                    • stephenw10S
                                      stephenw10 Netgate Administrator
                                      last edited by

                                      Still the 6100 running 23.09.1?

                                      If you manually reload the ruleset in Status > Filter Reload does that trigger it?

                                      A 1 Reply Last reply Reply Quote 0
                                      • A
                                        a.dresner @stephenw10
                                        last edited by stephenw10

                                        @stephenw10 Yes sir, the 6100 running 23.09.1. Here is the output from the Filter Reload, it did not trigger any notices.

                                        Initializing
Creating aliases
Creating gateway group item...
Generating Limiter rules
Generating NAT rules
Creating 1:1 rules...
Creating outbound NAT rules
Creating automatic outbound rules
Setting up TFTP helper
Generating filter rules
Creating default rules
Pre-caching ...
Creating filter rule  ...
Creating filter rules  ...
Setting up pass/block rules
Setting up pass/block rules 
Creating rule 
Pre-caching Wireguard Port...
Creating filter rule Wireguard Port ...
Creating filter rules Wireguard Port ...
Setting up pass/block rules
Setting up pass/block rules Wireguard Port
Creating rule Wireguard Port
Pre-caching ping...
Creating filter rule ping ...
Creating filter rules ping ...
Setting up pass/block rules
Setting up pass/block rules ping
Creating rule ping
Pre-caching Default allow LAN to any rule...
Creating filter rule Default allow LAN to any rule ...
Creating filter rules Default allow LAN to any rule ...
Setting up pass/block rules
Setting up pass/block rules Default allow LAN to any rule
Creating rule Default allow LAN to any rule
Pre-caching ...
Creating filter rule  ...
Creating filter rules  ...
Setting up pass/block rules
Setting up pass/block rules 
Creating rule 
Pre-caching OpenVPN OpenVPN Users wizard...
Creating filter rule OpenVPN OpenVPN Users wizard ...
Creating filter rules OpenVPN OpenVPN Users wizard ...
Pre-caching Homebridge Allow...
Creating filter rule Homebridge Allow ...
Creating filter rules Homebridge Allow ...
Setting up pass/block rules
Setting up pass/block rules Homebridge Allow
Creating rule Homebridge Allow
Pre-caching Block Default LAN...
Creating filter rule Block Default LAN ...
Creating filter rules Block Default LAN ...
Setting up pass/block rules
Setting up pass/block rules Block Default LAN
Creating rule Block Default LAN
Pre-caching Block Default LAN...
Creating filter rule Block Default LAN ...
Creating filter rules Block Default LAN ...
Setting up pass/block rules
Setting up pass/block rules Block Default LAN
Creating rule Block Default LAN
Pre-caching Allow Any...
Creating filter rule Allow Any ...
Creating filter rules Allow Any ...
Setting up pass/block rules
Setting up pass/block rules Allow Any
Creating rule Allow Any
Pre-caching Pass VPN traffic from WireGuard peers...
Creating filter rule Pass VPN traffic from WireGuard peers ...
Creating filter rules Pass VPN traffic from WireGuard peers ...
Setting up pass/block rules
Setting up pass/block rules Pass VPN traffic from WireGuard peers
Creating rule Pass VPN traffic from WireGuard peers
Pre-caching ...
Creating filter rule  ...
Creating filter rules  ...
Setting up pass/block rules
Setting up pass/block rules 
Creating rule 
Pre-caching Pass VPN traffic from WireGuard peers...
Creating filter rule Pass VPN traffic from WireGuard peers ...
Creating filter rules Pass VPN traffic from WireGuard peers ...
Setting up pass/block rules
Setting up pass/block rules Pass VPN traffic from WireGuard peers
Creating rule Pass VPN traffic from WireGuard peers
Pre-caching UNVR Allow...
Creating filter rule UNVR Allow ...
Creating filter rules UNVR Allow ...
Setting up pass/block rules
Setting up pass/block rules UNVR Allow
Creating rule UNVR Allow
Pre-caching Block Default LAN...
Creating filter rule Block Default LAN ...
Creating filter rules Block Default LAN ...
Setting up pass/block rules
Setting up pass/block rules Block Default LAN
Creating rule Block Default LAN
Pre-caching Allow Any...
Creating filter rule Allow Any ...
Creating filter rules Allow Any ...
Setting up pass/block rules
Setting up pass/block rules Allow Any
Creating rule Allow Any
Creating IPsec rules...
Creating uPNP rules...
Generating ALTQ queues
Loading filter rules
Setting up logging information
Setting up Ethernet filter rules...
Setting up SCRUB information
Processing down interface states
Running plugins
Done
                                        1 Reply Last reply Reply Quote 0
                                        • stephenw10S
                                          stephenw10 Netgate Administrator
                                          last edited by

                                          Hmm, is there any sort of pattern to when it happens? When it's passing most traffic perhaps?

                                          Is there anything else logged at the time?

                                          A 2 Replies Last reply Reply Quote 0
                                          • A
                                            a.dresner @stephenw10
                                            last edited by

                                            @stephenw10 I have 3 locations. 3 6100, 2 of them are nearly identical configuration, most of the same components on the LAN. The 6100 that is throwing off these errors was replaced due to hardware at one time and so the config was restored. It's also the least configured of the 3 in terms of rules. I really wish I could give you more details but that location is pretty quiet..

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.