pfsense 2.7.2 Never completes startup process
-
@yon-0 said in pfsense 2.7.2 Never completes startup process:
i setup Static routing like 117.32.0.0/13 to WAN, other ips via VPN. the LAN's can't route to 117.32.0.0/13 now
The most important thing at present is to solve the ipv4 routing problem.
-
Ok so what exactly is the routing issue you're seeing? How are you testing?
-
@stephenw10 said in pfsense 2.7.2 Never completes startup process:
Ok so what exactly is the routing issue you're seeing? How are you testing?
10.50.1.254 is lan gateway ip. ipv4 to any via wan no route .
|------------------------------------------------------------------------------------------| | WinMTR statistics | | Host - % | Sent | Recv | Best | Avrg | Wrst | Last | |------------------------------------------------|------|------|------|------|------|------| | 10.50.1.254 - 0 | 3 | 3 | 1 | 1 | 2 | 2 | | Request timed out. - 100 | 2 | 0 | 0 | 0 | 0 | 0 | | Request timed out. - 100 | 2 | 0 | 0 | 0 | 0 | 0 | | Request timed out. - 100 | 2 | 0 | 0 | 0 | 0 | 0 | | Request timed out. - 100 | 2 | 0 | 0 | 0 | 0 | 0 | | Request timed out. - 100 | 2 | 0 | 0 | 0 | 0 | 0 | | Request timed out. - 100 | 2 | 0 | 0 | 0 | 0 | 0 | | Request timed out. - 100 | 2 | 0 | 0 | 0 | 0 | 0 | | Request timed out. - 100 | 2 | 0 | 0 | 0 | 0 | 0 | | Request timed out. - 100 | 2 | 0 | 0 | 0 | 0 | 0 | | Request timed out. - 100 | 2 | 0 | 0 | 0 | 0 | 0 | | Request timed out. - 100 | 2 | 0 | 0 | 0 | 0 | 0 | | Request timed out. - 100 | 2 | 0 | 0 | 0 | 0 | 0 | | Request timed out. - 100 | 2 | 0 | 0 | 0 | 0 | 0 | | Request timed out. - 100 | 2 | 0 | 0 | 0 | 0 | 0 | | Request timed out. - 100 | 2 | 0 | 0 | 0 | 0 | 0 | | Request timed out. - 100 | 2 | 0 | 0 | 0 | 0 | 0 | | Request timed out. - 100 | 2 | 0 | 0 | 0 | 0 | 0 | | Request timed out. - 100 | 2 | 0 | 0 | 0 | 0 | 0 | | Request timed out. - 100 | 2 | 0 | 0 | 0 | 0 | 0 | | Request timed out. - 100 | 2 | 0 | 0 | 0 | 0 | 0 | | Request timed out. - 100 | 2 | 0 | 0 | 0 | 0 | 0 | | Request timed out. - 100 | 2 | 0 | 0 | 0 | 0 | 0 | | Request timed out. - 100 | 2 | 0 | 0 | 0 | 0 | 0 | | Request timed out. - 100 | 2 | 0 | 0 | 0 | 0 | 0 | | Request timed out. - 100 | 2 | 0 | 0 | 0 | 0 | 0 | | Request timed out. - 100 | 2 | 0 | 0 | 0 | 0 | 0 | | Request timed out. - 100 | 2 | 0 | 0 | 0 | 0 | 0 | | Request timed out. - 100 | 2 | 0 | 0 | 0 | 0 | 0 | | Request timed out. - 100 | 2 | 0 | 0 | 0 | 0 | 0 | |________________________________________________|______|______|______|______|______|______|WinMTR v1.00 GPLv2
-
So there is no default IPv4 route?
The IPv4 gateway is not responding?
What does the routing table look like?
-
@stephenw10 said in pfsense 2.7.2 Never completes startup process:
So there is no default IPv4 route?
The IPv4 gateway is not responding?
What does the routing table look like?
ipv4 default route is vpn interface. some ipv4 setup Static routing via pppoe wan.
IPv4 Routes default 10.16.0.1 UGS 10 1420 ovpnc12 1.0.1.0/24 link#14 U1 1 1492 pppoe2 1.0.2.0/23 link#14 U1 1 1492 pppoe2 1.0.8.0/21 link#14 U1 1 1492 pppoe2 1.0.32.0/19 link#14 U1 1 1492 pppoe2 1.1.0.0/24 link#14 U1 1 1492 pppoe2 1.2.0.0/15 link#14 U1 1 1492 pppoe2 1.8.0.0/16 link#14 U1 1 1492 pppoe2 -
Ok so what IP are you trying to reach in the traceroute above?
-
@stephenw10 said in pfsense 2.7.2 Never completes startup process:
Ok so what IP are you trying to reach in the traceroute above?
-
@stephenw10 said in pfsense 2.7.2 Never completes startup process:
Ok so what IP are you trying to reach in the traceroute above?
all need via pppoe2 route ip not work.
-
So is pppoe2 a valid gateway? Is it in the ARP table?
-
@stephenw10 said in pfsense 2.7.2 Never completes startup process:
So is pppoe2 a valid gateway? Is it in the ARP table?
yes. i use diag_traceroute.php tool Source Address use pppoe interface is normal.
but Source Address use LAN interface route not normal. -
No outbound NAT perhaps?
-
@stephenw10 said in pfsense 2.7.2 Never completes startup process:
No outbound NAT perhaps?
i sent pm to you.
