DNS/DHCP stop working suddenly

stephenw10

It will revert to the last good config if the current config file is unreadable. That could also indicate a drive issue.

michmoor

@stephenw10 OK now im nervous.
What are my options to either replace the 6100 or replace the SSD?

stephenw10

This is the first time you've seen this issue? It might not be the disk, I would want to see something conclusive. If it is you could just replace the disk though.

michmoor

@stephenw10
It happened again..
Got some more data that may or may not help.

Internet suddenly goes out so i go straight into console.
Nothing on the console screen. Usual output for selecting options.

WAN port loses IP address

Mar  1 15:22:59 GAFW dhclient[38626]: No working leases in persistent database - sleeping.
Mar  1 15:22:59 GAFW dhclient[30526]: FAIL
Mar  1 15:23:00 GAFW dhclient[38626]: connection closed
Mar  1 15:23:00 GAFW dhclient[38626]: exiting.
Mar  1 15:23:01 GAFW dhclient[41673]: PREINIT
Mar  1 15:23:01 GAFW dhclient[43008]: EXPIRE
Mar  1 15:23:01 GAFW dhclient[44238]: Deleting old routes
Mar  1 15:23:01 GAFW dhclient[45556]: PREINIT
Mar  1 15:23:01 GAFW dhclient[41096]: DHCPDISCOVER on ix3 to 255.255.255.255 port 67 interval 2
Mar  1 15:23:03 GAFW dhclient[41096]: DHCPDISCOVER on ix3 to 255.255.255.255 port 67 interval 5
Mar  1 15:23:08 GAFW dhclient[41096]: DHCPDISCOVER on ix3 to 255.255.255.255 port 67 interval 7

CPU usage using top -aSH command.

last pid: 16707;  load averages:  4.63,  3.67,  2.21                                                                                                         up 0+15:43:45  15:11:13
519 threads:   9 running, 472 sleeping, 38 waiting
CPU:  2.0% user,  0.0% nice, 26.4% system,  0.0% interrupt, 71.7% idle
Mem: 398M Active, 1576M Inact, 1347M Wired, 4465M Free
ARC: 319M Total, 119M MFU, 187M MRU, 875K Anon, 2154K Header, 10M Other
     261M Compressed, 759M Uncompressed, 2.91:1 Ratio
Swap: 1024M Total, 1024M Free

  PID USERNAME    PRI NICE   SIZE    RES STATE    C   TIME    WCPU COMMAND
    0 root        -60    -     0B  2128K CPU3     3  13:49  99.92% [kernel{if_io_tqg_3}]
   11 root        187 ki31     0B    64K RUN      2 872:54  95.83% [idle{idle: cpu2}]
   11 root        187 ki31     0B    64K CPU1     1 867:56  95.08% [idle{idle: cpu1}]
   11 root        187 ki31     0B    64K CPU0     0 878:02  93.18% [idle{idle: cpu0}]
60326 root         68    0   114M    51M accept   1   0:02   8.47% php-fpm: pool nginx (php-fpm)
81924 www          20    0    43M    23M kqread   1  12:44   1.15% /usr/local/sbin/haproxy -f /var/etc/haproxy/haproxy.cfg -p /var/run/haproxy.pid -D -x /tmp/haproxy.socket -sf 465
20240 unbound      20    0   192M   144M kqread   0   0:01   0.60% /usr/local/sbin/unbound -c /var/unbound/unbound.conf{unbound}
42858 root         20    0    13M  3084K select   2   4:35   0.57% /usr/sbin/syslogd -O rfc3164 -s -c -c -l /var/dhcpd/var/run/log -l /tmp/haproxy_chroot/var/run/log -P /var/run/sy
20240 unbound      20    0   192M   144M kqread   1   0:01   0.53% /usr/local/sbin/unbound -c /var/unbound/unbound.conf{unbound}
63614 root         20    0  1196M   733M uwait    1   4:34   0.48% /usr/local/bin/suricata --netmap -D -c /usr/local/etc/suricata/suricata_12791_igc1/suricata.yaml --pidfile /var/r
    0 root        -64    -     0B  2128K -        1   1:21   0.28% [kernel{dummynet}]
    0 root        -12    -     0B  2128K -        1   0:41   0.23% [kernel{z_wr_iss_0}]
48900 root         20    0    13M  3520K bpf      2   2:43   0.22% /usr/local/sbin/filterlog -i pflog0 -p /var/run/filterlog.pid
    0 root        -12    -     0B  2128K -        1   0:41   0.21% [kernel{z_wr_iss_1}]

michmoor

@stephenw10

What is also strange is that i could not resolve anything local. My own self hosted services would time out..

C:\Users\michm>nslookup syslog.xxxxxxx
Server:  GAFW.xxxxxxx
Address:  192.168.50.254

DNS request timed out.
    timeout was 2 seconds.
DNS request timed out.
    timeout was 2 seconds.
*** Request to GAFW.xxxxxxxxx timed-out

I went ahead and went for the reboot through console. It could not stop the Tailscale package. This forced me to pull the plug and plug it back in.

Netgate pfSense Plus will reboot. This may take a few minutes, depending on your hardware.
Do you want to proceed?

    Y/y: Reboot normally
    R/r: Reroot (Stop processes, remount disks, re-run startup sequence)
    S: Reboot into Single User Mode (requires console access!)
    Enter: Abort

Enter an option: r

Netgate pfSense Plus is rerooting now.
 Stopping package arpwatch...done.
 Stopping package freeradius3...done.
 Stopping package lldpd...done.
 Stopping package WireGuard...done.
 Stopping package haproxy...done.
 Stopping package nut...done.
 Stopping package syslog-ng...done.
 Stopping package Tailscale...   <----- stuck here and could not go past

I eventually lost access to the web configurator and got the nginx timed out message.

stephenw10

OK interesting. Not the SSD then, so that's good.

One CPU core seems to be stuck at 100%. We can only see it's interface io traffic so something attempting (and seemingly failing) to send or receive. From the fact tailscale could not be stopped I'd guess it's that somehow. Are you able to disable that as a test?

michmoor

@stephenw10
I have uninstalled Tailscale.
I’m glad I got some more data on this so thanks for the assistance.

If this is a bug - let’s say it might be for sake of conversation - I don’t have much data to prove this isn’t just environmental to my setup. Any other data points I can gather?
Losing a WAN ip address does make Tailscale chatty but i can’t find the link to why dns breaks for local resolution.

stephenw10

It looks like whatever is using that CPU core is preventing anything sending/receiving traffic or possible opening states. Causing problem for numerous services.

michmoor

@stephenw10
Interesting and i love that theory. Seems very logical.
Would explain why almost all functionality related to the firewall is broken - web-configurator , dns , dhcp...
Considering the 6100 has 4x cores, its not odd that a single core choking the firewall breaks connectivity?

edit: So whatever is using that core is related to traffic? High throughput? This 6100 can for sure push well over 10G from my testing but looking at the monitoring i see pretty low WAN throughput considering.
Tailscale seems like the smoking gun but checking my historical syslog it seems that once ix3 (WAN) goes down and cant renew a dhcp address, tailscale becomes very verbose. As i discovered today i am unable to reboot the router because it gets stuck on the tailscale process. High level but the trigger is losing the WAN.
If we're stable this weekend, i will install tailscale again and unplug the wan..see if i can reproduce.

stephenw10

@michmoor said in DNS/DHCP stop working suddenly:

Considering the 6100 has 4x cores, its not odd that a single core choking the firewall breaks connectivity?

It is I agree. Though I'm assuming it's choking something in the network stack so it doesn't matter than then other cores are still available.

tinfoilmatt

@michmoor said in DNS/DHCP stop working suddenly:

I went ahead and went for the reboot through console. It could not stop the Tailscale package. This forced me to pull the plug and plug it back in.

what's the longest you waited for the system to shutdown gracefully when it appeared to be 'stuck" stopping Tailscale package? conservative estimate in minutes...

michmoor

@cyberconsultants
maybe 5mins or so.
Reboots generally do not take long

@stephenw10 so far since the TS package removal things have been stable since. I’ll add the package tomorrow and let you know how things go.

tinfoilmatt

@michmoor five minutes doesn't seem reasonable given documented precaution:

https://docs.netgate.com/pfsense/en/latest/diagnostics/system-halt.html

...and what you seemed to be dealing with more specifically.

abrupt and repeated power losses over time might be closer in line with your 'root cause' than any particular package. i personally think it'd be advisable to make not cutting the power until you've waited at least an unreasonable period of time given the specific reboot context (sysem updates, maintenance, system crash, etc.) a more regular practice.

pfSense is a software firewall that doesn't load its config strictly out of NVRAM like typical consumer devices often do. despite filesystem and backup/recovery/snapshot improvements over time, OS corruption is still a real concern with abrupt loss of system power.

stephenw10

In reality I don't think I've ever seen a correctly functioning install take more than 5 mins to shutdown.

tinfoilmatt

@stephenw10 said in DNS/DHCP stop working suddenly:

In reality I don't think I've ever seen a correctly functioning install take more than 5 mins to shutdown.

so you would pull the physical power after five minutes of Stopping package Tailscale... in some kind of unstable system state?

stephenw10

If the console was hung at that point then yes. I might try hitting ctl+t first to see what it's actually waiting for. That won't allow it to continue but might give a clue as to why it failed.

tinfoilmatt

@stephenw10 said in DNS/DHCP stop working suddenly:

If the console was hung at that point then yes. I might try hitting ctl+t first to see what it's actually waiting for. That won't allow it to continue but might give a clue as to why it failed.

lol

michmoor

@stephenw10
Hey Stephen,
It happened again. I collected some data to help diagnose

I initially SSH'd to my firewall and was able to run a top -aSH.

last pid: 37748;  load averages:  5.19,  5.30,  5.34                                                                                                         up 5+14:27:25  06:36:49
536 threads:   10 running, 488 sleeping, 38 waiting
CPU:  1.1% user,  0.0% nice, 26.6% system,  0.1% interrupt, 72.3% idle
Mem: 471M Active, 1981M Inact, 1400M Wired, 3937M Free
ARC: 341M Total, 106M MFU, 214M MRU, 2972K Anon, 2640K Header, 14M Other
     267M Compressed, 972M Uncompressed, 3.64:1 Ratio
Swap: 1024M Total, 1024M Free

  PID USERNAME    PRI NICE   SIZE    RES STATE    C   TIME    WCPU COMMAND
    0 root        -60    -     0B  2160K CPU3     3 260:17  99.91% [kernel{if_io_tqg_3}]
   11 root        187 ki31     0B    64K CPU0     0 127.5H  96.51% [idle{idle: cpu0}]
   11 root        187 ki31     0B    64K CPU1     1 126.0H  95.49% [idle{idle: cpu1}]
   11 root        187 ki31     0B    64K RUN      2 126.7H  95.47% [idle{idle: cpu2}]
98424 unbound      23    0   179M   139M kqread   1   0:06   3.65% /usr/local/sbin/unbound -c /var/unbound/unbound.conf{unbound}
98424 unbound      21    0   179M   139M kqread   2   0:05   2.39% /usr/local/sbin/unbound -c /var/unbound/unbound.conf{unbound}

I noticed that my WAN IP has changed. Being on ATT fiber it has remained the same for over two years but its DHCP so now its time to change.

All logging stopped at the same time

-rw-------  1 root       wheel       572K Mar  7 02:29 filter.log.1.bz2
-rw-------  1 root       wheel       534K Mar  7 02:35 filter.log.0.bz2
-rw-------  1 root       wheel       214K Mar  7 02:37 resolver.log.1.bz2
-rw-------  1 root       wheel       149K Mar  7 02:39 resolver.log.0.bz2
-rw-------  1 root       wheel       2.9M Mar  7 02:39 auth.log
-rw-------  1 root       wheel       938K Mar  7 02:39 dhcpd.log
-rw-------  1 root       wheel       3.1M Mar  7 02:39 gateways.log
-rw-------  1 root       wheel       544K Mar  7 02:39 ntpd.log
-rw-------  1 root       wheel       2.6M Mar  7 02:39 nginx.log
-rw-------  1 root       wheel       2.8M Mar  7 02:39 routing.log
-rw-------  1 root       wheel       2.5M Mar  7 02:39 ipsec.log
-rw-------  1 root       wheel       2.5M Mar  7 02:39 openvpn.log
-rw-------  1 root       wheel       6.5M Mar  7 02:39 system.log
-rw-------  1 root       wheel       8.4M Mar  7 02:39 filter.log
-rw-------  1 root       wheel       426K Mar  7 02:39 resolver.log
-rw-------  1 freeradius freeradius  879K Mar  7 02:40 radius.log
-rw-r--r--  1 root       wheel       591B Mar  7 06:36 utx.lastlogin
-rw-------  1 root       wheel        22K Mar  7 06:36 utx.log

I still couldn't get to the GUI on the LAN side as it was unresponsive so from SSH I went ahead with the reboot. It was stalling on stopping certain packages so I did ctrl t

Netgate pfSense Plus is rebooting now.
 Stopping package arpwatch...done.
 Stopping package freeradius3...done.
 Stopping package lldpd...done.
 Stopping package WireGuard...
load: 5.71  cmd: php_wg 65403 [nanslp] 10.49r 0.68u 0.07s 3% 53036k
done.
 Stopping package haproxy...done.
 Stopping package nut...done.
 Stopping package syslog-ng...done.
 Stopping package softflowd...done.
 Stopping package suricata...

 Stopping package suricata...
load: 5.59  cmd: php-cgi 56784 [nanslp] 35.07r 0.54u 0.04s 0% 53360k

Waiting over an hour...........yes an hour...pfsense never came back from the reboot and within that hour I lost access to the shell. So I went in through the console and the console was flooded with the following logs.

arpresolve: can't allocate llinfo for 192.168.1.254 on ix3

I couldn't access anything else via console. Just the flooding of the arpresolve log tied up anything. Even disconnecting the ix3 interface from the ATT modem didn't matter..arpresolve still kept flooding console.

Finally, a reboot fixed it. Back online..

tinfoilmatt

@michmoor sounds like a simple gateway alarm/action triggering a cascade of headache. you might review configuration of the packages whose services you're not allowing to stop, likely compounding the kludge each time you do. it'll only get longer and kludgier if you keep "resolving" it the way you are.

Suricata initialization (both start and stop) is what's causing those arpresolve kernel notices.

stephenw10

Do you have the service watchdog installed? That can cause problems with stopping services when incorrectly used. It should only really be used for debugging. You would see that logged though.