Error Fresh installation, media sector size
-
Hello guys,
I have tried install Pfsense with this img: pfSense-CE-memstick-2.3.4-RELEASE-amd64.img, but I can't install, the log is the following:Media sector size is 512 Warning: Bios sector numbering starts with sector 1 Information from DOS bootblock is: The data for patition 1 is: sysid 165 (0xa5), (FreeBSD/NetBSD/386BSD) start 63, size250069617 (122104 Meg), flag 80 (active) beg: cyl 0/ head 1/ sector 1; end: cyl 276/ head 15/ sector 63 The data for partition 2 is: UNUSED the data for partition 3 is: UNUSED the data for partition 4 is: UNUSED exit status: 0 Executing /sbin/bsdlabel -B -r -w ada0s1 auto bsdlabel unable to get correct path for ada0s1: No such file or directory exit status: 1
note: I added the pictures with the full log error, names: error-log1 and error-log2
Here is the disk target for the installation, before tried install Pfsense
fdisk -l Disk /dev/sda: 119.2 GiB, 12803567160 bytes, 250069680 sectors Units: sectors of 1 * 512 = 512 bytes Sector seize (logical/physical): 512bytes / 512 bytes I/O size (minimun/optimal): 512 bytes / 512 bytes
Here is the same disk after tried install Pfsense:
Disk /dev/sda: 119.2 GiB 128035676160 bytes, 25006980 sectors Units: sectors of 1 * 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes /512 bytes Disklabel type: dos Disk identifier: 0x90909090 Device Boot Start End Sectors Size ID Type /dev/sda1 * 63 250069679 250069617 119.2G a5 FreeBSD
I took 2 pictures from Bios, the Main and the Disk's section, names: Bios-disks and bios-info.
If you need any else, please let me know.
Thanks!!
JA
-
At a loss to what your trying to do? The memstick images are meant to be written to a usb stick.. And then booted from that stick..
https://doc.pfsense.org/index.php/Writing_Disk_Images
-
I did.
I used an usb to install Pfsense and the error is from that installation using pfSense-CE-memstick-2.3.4-RELEASE-amd64.img.
At a loss to what your trying to do? The memstick images are meant to be written to a usb stick.. And then booted from that stick..
https://doc.pfsense.org/index.php/Writing_Disk_Images