Home page traffic graph shows ~half the correct number?
-
@Gblenn - Thank you for that response! I discovered that the problem returned after I had logged off and came back to test again later, so I was about to post yet another reply to myself. (I did a search on the topic, but didn't see the post you provided. Thanks for that.) Cheers!
-
Hmm, yup there have been several bugs in the past resulting in double or half the traffic shown. I thought they were fixed in 2.7.2 but apparently not.
Do you see that in the traffic graphs widget on the dashboard and in Status > Traffic Graphs?
-
Ah there is one still open: https://redmine.pfsense.org/issues/14933
There's a patch for it on there you can test.
-
@stephenw10 Never applied a patch like that, only the recommended system patches.
I pasted the link address and did "fetch", and it looks like this now :
After changing the path strip count to 1, I get the Apply button...
Am I safe to click Apply?? Or is there a way to a test run, without implementing?
-
There isn't but I tested it here just now and nothing blew up.
-
@stephenw10 Ok, then I guess it should be safe to try.
I did just now notice the very latest comment from Danilo, that path strip = 0 should be set...
-
Hmm, with the wrong path strip set I wouldn't expect it to apply at all.
-
It does apply with either 1 or 0 set though. 0 is correct the patch does not have any leading path that needs to be stripped.
-
@stephenw10 I discovered that before clicking Apply, so I only tried with it set to 0.
But anyway, the patch seem to work and I'm now seeing a correct graph also when returning to the page...
-
@Gblenn The patch seems to be working here, as well. Thanks to you and @stephenw10 for your help. Much appreciated.
