24.03 beta to 24.03 RC upgrade failed

stephenw10

That might also apply to the first failure here though that error is slightly different.

Is that a UEFI device?

What do you see if you run efibootmgr manually?

mikey_s

@stephenw10

Yes it’s an UEFI device.

Planning on doing a check and fresh install of 2.7, then update to 23.09.1 and testing again.

Will highlight what I find and such.

It is my spare XG230 Rev2, I have my main Plus install on a XG135 Rev2.

stephenw10

Run: sysctl machdep.bootmethod

That will show you what it's actually booted.

stephenw10

@mikkom

What hardware is that?

Can you try running efibootmgr at the CLI and see what error it shows?

mikey_s

@stephenw10

efibootmgr: efi variables not supported on this system. root? kldload efirt?

XG230 Rev2 is a 1U Sophos appliance made by caswell. My unit is based on a Haswell CPU - i3-6100T as I swapped the CPU from a G4400.

mikey_s

@stephenw10

machdep.bootmethod: BIOS

Interesting, a re-checked the BIOS and it was UEFI and BIOS, so I'm going to re-install and then upgrade and again.

stephenw10

Ah, Ok. Yes you're hitting that bug directly then. If you install as both but then boot legacy that's when you will hit it. There's a fix for that incoming.

If you switch the BIOS to boot uefi it will pass that. Or install legacy only.

mikey_s

@stephenw10

I switched to UEFi in the BIOS and still issue, so will do a fresh install and re-test.

stephenw10

Is it actually booting uefi? The sysctl command show it is?

If so try running efibootmgr at the CLI and see what it returns.

You may have an interesting edge case.

mikey_s

@stephenw10

In process of rebuilt, so fresh 2.7.2 and upgrading to 23.09.1 atm and then I'll go to the RC and feedback.

mikey_s

Rebuilt and now updated

Boot to FW : false
BootCurrent: 0000
Timeout : 3 seconds
BootOrder : 0000, 0004, 0003
+Boot0000* FreeBSD
Boot0004* UEFI OS
Boot0003 UEFI: Built-in EFI Shell

machdep.bootmethod: UEFI

Now to deceide if I use a Intel(R) Core(TM) i3-6100T CPU @ 3.20GHz or a Intel(R) Atom(TM) CPU C3558 @ 2.20GHz with QAT.

The XG 135 Rev3 with Intel(R) Atom(TM) CPU C3558 @ 2.20GHz is my prod system, the above is my testing system.

stephenw10

Ok well that won't hit the issue now.

mikey_s

@stephenw10 said in 24.03 beta to 24.03 RC upgrade failed:

Ok well that won't hit the issue now.

Many thanks

Happy to build it back to how it was if you want a system in BIOS mode, but I expect you're all already on the case and don't need my minimal input.

stephenw10

If you have some special edge case it could be useful. The OP here has unexpected output from efibootmgr for example.

It usually either fails entirely like you originally saw or returns the list of boot entries without error. Anything other than that would be useful to test on.