SG-2100-MAX System crashes with Compex use and 1gbps fiber
-
Yeah that looks pretty much the same. More is useful though just to be sure.
You have a bunch of ath tunables if I recall? Have you tested without those?
-
@stephenw10 I removed all of them a while ago once it started working normally before the GB fiber
The only one I have left is
vfs.read_max Cluster read-ahead max block count = 128 for Squid
-
@stephenw10 I even installed a brand new out of the box card to see if that resolves it same thing happens with the new card too
-
@stephenw10 Do you want the whole crash report it is huge
-
That's not ath specific though, should be fine
-
@stephenw10 I wonder if I set channels wrong or something on the config side I have it set to 802.11a/n channel 151 or something and I think 11 for FCC with anywhere set and 60second for rekey and 3600 for group that was default values I have BSSintra communication set to no I just don't understand why it worked perfectly with the DSL and won't work now, I also use a traffic shaper for limiters CODEL with it set to 1000mbps to match my fiber line with 5000 for the length same thing reboots when I use that card
-
@stephenw10 TAC asked me to submit a Redmine because they said it is a bug in that Ath driver
-
Yup, it probably is. And it could well be specific to aarch64. There can't be many people using that combination.
Do you have several full crash reports yet?
-
@stephenw10 They wanted it submitted with the chipset info so they have what they need I guess.. I am confused as why it worked with 6mbs but not with the full speed that one report we got to them worked for finding the issue
-
You opened a bug? A ticket?
-
https://redmine.pfsense.org/issues/15472
-
Ok cool. It's specifically the Compex WLE200NX right? You should add that info to the bug.
-
@stephenw10 said in SG-2100-MAX System crashes with Compex use and 1gbps fiber:
Compex WLE200NX
Done added
