No web gui after updating 24.03

lohphat

@rbron01

Same thing happened. No WebUI and no DNS.

I had to revert to a backup config made right before the upgrade and reboot. WebUI and DNS came back.

johnpoz

@lohphat Are you also running on a VM?

lohphat

@johnpoz Negative. SG-3100

johnpoz

@lohphat I would do the same sort of testing, is nginx running even can you call it up on pfsense locally via loopback and IP your trying to hit.

Not aware of your config - but some issues being run into with the new interface binding for states vs floating. You could try changing it to floating, and then figure out what your doing that interface binding isn't working.

4eanlss

Confirmed that I have the anti-lockout rule:

cat /tmp/rules.debug | grep anti-

pass in quick on mvneta1 proto tcp from any to (mvneta1) port { 443 80 } ridentifier 10001 keep state label "anti-lockout rule"

4eanlss

@johnpoz Yes. It resolves to my ISPs LiteBeam 5AC Gen2

4eanlss

@stephenw10 said in No web gui after updating 24.03:

https://docs.netgate.com/pfsense/en/latest/releases/24-03.html#general

Even disabling the firewall does not resolve the web gui.
Still get either 301 Moved Permanently for port 80 or no response on port 8443.

Tried restarting the GUI -- nothing.
Considering reloading the config from just before the upgrade.

4eanlss

How to change state binding back to float from console via shell?

4eanlss

@4eanlss BTW: I also realized what was meant by try the WAN interface address.

From shell temporarily disabled PF: pfctl -d
launch browser to WAN IP
Accept the warning about certificate i.e. https workds
However, still receive a blank page.

4eanlss

@4eanlss Okay, so, after looking at the boot log I've found that there are a number of core-dumps on pkg-static. Looks like install from fresh image is in order.