Extremely slow DNS solved by disabling & re-enabling Python mode (unbound)

HLPPC

@bernieke Could be a dns rebind attack. You could try to capture http requests sent to and from unbound.

https://youtu.be/y9-0lICNjOQ?si=61DIfH4BWwwGqGIK

Says that pfSense can have issues

A friend of mine says that some ISPs bad Routing Public Key Infastructure Means people are subject to replay attacks and DNS rebind attacks. And also random interference if someone else out there has the same ipv4 address as you.

Also maybe try running tests on internet.nl see if your dns is encrypting correctly.

https://youtu.be/YKxKnVE5FaE?si=gCvUZ9IOFOVISHf4

Python is weird sometimes too. I do like cins army blocklists on a WAN.

HLPPC

@bernieke

Maybe the ISP wants your attention or you to do actual routing with BGP or something. They sometimes downgrade dns

https://youtu.be/jXG8fuJ-fUI?si=zTHyKmZNEy5vlDAC

If you are blocking dns, sometimes the same dns requests will repeat and go all the way around the world until successful.

pfBlocker has sent me to Qatar for google ads while blocking google but using google dns. Plausible too since jitter and whatnot with fq_codel is like zero. You can encrypt DNS extensions and use dns encryption curves and whatnot on some sides of the planet more bearably than others.

1 RSA/MD5 Must Not Implement Must Not Implement
3 DSA/SHA-1 Must Not Implement Must Not

2 SHA-256 RFC 4509 Required Required

Also, some dns encryption allows for dnssec and others forbid it. Fiber may employ TR-069 which uses MD5 somewhere and that isn't supposed to show up in dns encryption tests, according to a friend who wrote the internet.nl website.

Their dnssec resolver algorithm test is pretty good.

https://en.m.wikipedia.org/wiki/Domain_Name_System_Security_Extensions

Might be some Big-O stuff I didn't go to school for

Gertjan

@HLPPC said in Extremely slow DNS solved by disabling & re-enabling Python mode (unbound):

according to a friend who wrote the internet.nl website.

When you see him next time, show him this :

compared to :

Mails I send to gmail (example) confirm that my domain name, my mail server supports DANE.
This makes me doubt about the "internet.nl" DANE test.

@HLPPC said in Extremely slow DNS solved by disabling & re-enabling Python mode (unbound):

Their dnssec resolver algorithm test is pretty good.

Those who implement DNNSEC will probably use :
https://dnsviz.net/ example : https://dnsviz.net/d/test-domaine.fr/dnssec/
https://dnssec-analyzer.verisignlabs.com/

as these sites will indicate what is wrong if things are wrong.

@HLPPC said in Extremely slow DNS solved by disabling & re-enabling Python mode (unbound):

Also, some dns encryption allows for dnssec and others forbid it

DNSSEC isn't about encryption ( ≈ making your DNS requests invisible for others ).
They have to not-TLS as the DNS root servers don't support secured DNS (DNS over TLS) yet. And IMHO, it will take sometime before they do, as if all DNS has to go over TLS it would need to "thousand fold" the capacity of each DNS server, root and TLD, as TLS needs way more system resources as plain text small UDP packets.

The (your) wiki page :

DNSSEC does not provide confidentiality of data; in particular, all DNSSEC responses are authenticated but not encrypted.

DNSSEC is only about getting the correct answer.

bernieke

The past two days without pfblockerng worked perfectly fine. So I think we can conclude the problem isn't with DNS itself.

As soon as I enable pfblockerng + perform an update, I get the slow resolving. (I didn't realize the update was necessary when debugging this on Sunday, which is why the problem took a while to reappear, it only came after the next update on the hour.)

It's not just related to the update itself either, the problem doesn't go away afterwards, even after multiple hours. So simply changing the schedule to daily / weekly won't help me either.

There was mention of unbound restarts, but looking at the logs and the start time in a "ps aux|grep unbound" this doesn't seem to be the case for me, both indicate the time of my last change.

Disabling DNSBL, and updating again, fixes the problem as well. So clearly the problem is specifically with DNSBL.

I've now been trying to see if it's any specific group of feeds that's causing the problem.

The first step was enabling DNSBL with all groups disabled. ~~This was stable.~~

I then tried enabling groups one by one. But what I'm seeing is that the problem starts occurring at some point (not immediately after the update though, so it's unclear as of now which (if any) group might be the cause), but simply disabling groups and updating won't make it go away afterwards either (even if I disable all the groups), until I actually disable DNSBL altogether! So it seems something is getting stuck on the unbound side? Maybe the cache which I see mention of being restored after the unbound restart?

I'll continue trying to play with enabling groups of feeds to see if I can further pinpoint the problem (but this time with DNSBL disables / enables in between the changes). Although I'm starting to think it's not with any specific feed, but rather something (cache?) which keeps being added to instead of replacing / updating...

EDIT: It just happened with all groups disabled as well.

HLPPC

The ambient temperature with my ISP's equipment has to be like, 180 degrees F (82 C) right now. I wonder if that matters with dns and weird retransmissions.

Gertjan

@bernieke said in Extremely slow DNS solved by disabling & re-enabling Python mode (unbound):

There was mention of unbound restarts, but looking at the logs and the start time in a "ps aux|grep unbound" this doesn't seem to be the case for me, both indicate the time of my last change.

Use this to get start (and thus stop) moments :

grep 'start' /var/log/resolver.log

Your stats :

@bernieke said in Extremely slow DNS solved by disabling & re-enabling Python mode (unbound):

Jun 16 10:09:15 cerberus unbound[35808]: [35808:0] info: average recursion processing time 12.517736 sec

@bernieke said in Extremely slow DNS solved by disabling & re-enabling Python mode (unbound):

Jun 16 10:09:15 cerberus unbound[35808]: [35808:0] info: average recursion processing time 10.398178 sec

These two are the times it takes for a resolve process : get in contact with a root server (maybe already cached), then a TLD (may be already cached) and then a domain name server for an, example, A record.
These times are huge !

Just to be sure : these two, do they become way faster when there is not 'pfBlockerng' ?
or 'pfBlockerng' but no 'DNSBL' ?
Btw : python mode was introduced so 'plugins' or 'packages' or 'add-ons' could be written for unbound. Doing 'DNSBL' is just one of the possibilities = comparing the requested host name with a big list.

Typically, I see :

total.recursion.time.avg=0.128068

Which is still a whopping 128 msec

How big is your main DNSBL list ?

The list is stored in /var/unbound/pfb_py_hsts.txt ( I guess ).

Btw : you can see stats all the time with :

unbound-control -c /var/unbound/unbound.conf stats

bernieke

@Gertjan said in Extremely slow DNS solved by disabling & re-enabling Python mode (unbound):

Use this to get start (and thus stop) moments :
grep 'start' /var/log/resolver.log

No starts except for the ones I initiated.

Your stats :
These times are huge !

Just to be sure : these two, do they become way faster when there is not 'pfBlockerng' ?
or 'pfBlockerng' but no 'DNSBL' ?

This is with pfblockerng enabled and DNSBL disabled:

thread0.recursion.time.avg=0.031121
thread0.recursion.time.median=0.0216847
thread1.recursion.time.avg=0.027506
thread1.recursion.time.median=0.015819
total.recursion.time.avg=0.029363
total.recursion.time.median=0.0187519

How big is your main DNSBL list ?

It happens even with all the groups disabled, just having DSNBL enabled is sufficient (or, I guess, more correctly: having the unbound python module enabled?):

 UPDATE PROCESS START [ v3.2.0_10 ] [ 06/19/24 08:38:02 ]

===[  DNSBL Process  ]================================================

 Loading DNSBL Statistics... completed
 Missing DNSBL stats and/or Unbound DNSBL files - Rebuilding

 Loading DNSBL SafeSearch... enabled
 Loading DNSBL Whitelist... completed
 Loading TOP1M Whitelist... completed

Clearing all DNSBL Feeds
Added DNSBL Unbound python integration settings
Adding DNSBL Unbound python mounts:
  Creating: /var/unbound/usr/local/bin
  Mounting: /usr/local/bin
  Creating: /var/unbound/usr/local/lib
  Mounting: /usr/local/lib

DNS Resolver ( enabled ) unbound.conf modifications:
  Added DNSBL Unbound Python mode
  Added DNSBL Unbound Python mode script

VIP address(es) configured
Restarting DNSBL Service

TLD Analysis not required.
Stopping Unbound Resolver
Unbound stopped in 1 sec.
Additional mounts (DNSBL python):
   Mounting: /dev
Starting Unbound Resolver... completed [ 06/19/24 08:38:22 ]
Restarting DNSBL Service (DNSBL python)
DNSBL update [ 0 | PASSED  ]... completed
------------------------------------------------------------------------

===[  GeoIP Process  ]============================================


===[  IPv4 Process  ]=================================================

[ Amazon_AWS_v4 ]		 exists.
[ Atlassian_v4 ]		 exists.
[ Cloudflare_v4 ]		 exists.
[ GitHub_v4 ]			 exists.
[ Google_v4 ]			 exists.
[ Office_365_v4 ]		 exists.
[ Zendesk_v4 ]			 exists.
[ Abuse_Feodo_C2_v4 ]		 exists.
[ Abuse_SSLBL_v4 ]		 exists.
[ CINS_army_v4 ]		 exists.
[ ET_Block_v4 ]			 exists.
[ ET_Comp_v4 ]			 exists.
[ ISC_Block_v4 ]		 exists.
[ Spamhaus_Drop_v4 ]		 exists.
[ Spamhaus_eDrop_v4 ]		 exists.
[ Talos_BL_v4 ]			 exists.
[ MS_1_v4 ]			 exists.

===[  IPv6 Process  ]=================================================

[ Amazon_AWS_v6 ]		 exists.
[ Atlassian_v6 ]		 exists.
[ Cloudflare_v6 ]		 exists.
[ GitHub_v6 ]			 exists.
[ Google_v6 ]			 exists.
[ Office_365_v6 ]		 exists.

===[  Aliastables / Rules  ]==========================================

No changes to Firewall rules, skipping Filter Reload
No Changes to Aliases, Skipping pfctl Update


** Restarting firewall filter daemon **

 UPDATE PROCESS ENDED [ 06/19/24 08:38:32 ]

I just now tested this again, and I got timeout errors five minutes after enabling DSNBL without any feeds.

These are the unbound stats when the problem is occuring (note that getting these stats took a few seconds as well, while with DNSBL disabled they are immediate):

thread0.num.queries=86937
thread0.num.queries_ip_ratelimited=0
thread0.num.queries_cookie_valid=0
thread0.num.queries_cookie_client=0
thread0.num.queries_cookie_invalid=0
thread0.num.cachehits=83450
thread0.num.cachemiss=3487
thread0.num.prefetch=0
thread0.num.queries_timed_out=0
thread0.query.queue_time_us.max=0
thread0.num.expired=0
thread0.num.recursivereplies=3485
thread0.num.dnscrypt.crypted=0
thread0.num.dnscrypt.cert=0
thread0.num.dnscrypt.cleartext=0
thread0.num.dnscrypt.malformed=0
thread0.requestlist.avg=7.79036
thread0.requestlist.max=27
thread0.requestlist.overwritten=0
thread0.requestlist.exceeded=0
thread0.requestlist.current.all=2
thread0.requestlist.current.user=2
thread0.recursion.time.avg=10.313877
thread0.recursion.time.median=9.76303
thread0.tcpusage=0
thread1.num.queries=84599
thread1.num.queries_ip_ratelimited=0
thread1.num.queries_cookie_valid=0
thread1.num.queries_cookie_client=0
thread1.num.queries_cookie_invalid=0
thread1.num.cachehits=81243
thread1.num.cachemiss=3356
thread1.num.prefetch=0
thread1.num.queries_timed_out=0
thread1.query.queue_time_us.max=0
thread1.num.expired=0
thread1.num.recursivereplies=3355
thread1.num.dnscrypt.crypted=0
thread1.num.dnscrypt.cert=0
thread1.num.dnscrypt.cleartext=0
thread1.num.dnscrypt.malformed=0
thread1.requestlist.avg=8.15435
thread1.requestlist.max=22
thread1.requestlist.overwritten=0
thread1.requestlist.exceeded=0
thread1.requestlist.current.all=1
thread1.requestlist.current.user=1
thread1.recursion.time.avg=11.145005
thread1.recursion.time.median=10.6155
thread1.tcpusage=0
total.num.queries=171536
total.num.queries_ip_ratelimited=0
total.num.queries_cookie_valid=0
total.num.queries_cookie_client=0
total.num.queries_cookie_invalid=0
total.num.cachehits=164693
total.num.cachemiss=6843
total.num.prefetch=0
total.num.queries_timed_out=0
total.query.queue_time_us.max=0
total.num.expired=0
total.num.recursivereplies=6840
total.num.dnscrypt.crypted=0
total.num.dnscrypt.cert=0
total.num.dnscrypt.cleartext=0
total.num.dnscrypt.malformed=0
total.requestlist.avg=7.96887
total.requestlist.max=27
total.requestlist.overwritten=0
total.requestlist.exceeded=0
total.requestlist.current.all=3
total.requestlist.current.user=3
total.recursion.time.avg=10.721543
total.recursion.time.median=10.1893
total.tcpusage=0
time.now=1718782293.781636
time.up=3192.962215
time.elapsed=3192.962215
mem.cache.rrset=292578
mem.cache.message=309466
mem.mod.iterator=16716
mem.mod.validator=0
mem.mod.respip=0
mem.cache.dnscrypt_shared_secret=0
mem.cache.dnscrypt_nonce=0
mem.mod.dynlibmod=0
mem.streamwait=0
mem.http.query_buffer=0
mem.http.response_buffer=0
histogram.000000.000000.to.000000.000001=41
histogram.000000.000001.to.000000.000002=0
histogram.000000.000002.to.000000.000004=0
histogram.000000.000004.to.000000.000008=0
histogram.000000.000008.to.000000.000016=0
histogram.000000.000016.to.000000.000032=0
histogram.000000.000032.to.000000.000064=0
histogram.000000.000064.to.000000.000128=0
histogram.000000.000128.to.000000.000256=0
histogram.000000.000256.to.000000.000512=0
histogram.000000.000512.to.000000.001024=0
histogram.000000.001024.to.000000.002048=0
histogram.000000.002048.to.000000.004096=0
histogram.000000.004096.to.000000.008192=2
histogram.000000.008192.to.000000.016384=79
histogram.000000.016384.to.000000.032768=57
histogram.000000.032768.to.000000.065536=50
histogram.000000.065536.to.000000.131072=34
histogram.000000.131072.to.000000.262144=5
histogram.000000.262144.to.000000.524288=75
histogram.000000.524288.to.000001.000000=92
histogram.000001.000000.to.000002.000000=252
histogram.000002.000000.to.000004.000000=676
histogram.000004.000000.to.000008.000000=1229
histogram.000008.000000.to.000016.000000=3014
histogram.000016.000000.to.000032.000000=1054
histogram.000032.000000.to.000064.000000=177
histogram.000064.000000.to.000128.000000=3
histogram.000128.000000.to.000256.000000=0
histogram.000256.000000.to.000512.000000=0
histogram.000512.000000.to.001024.000000=0
histogram.001024.000000.to.002048.000000=0
histogram.002048.000000.to.004096.000000=0
histogram.004096.000000.to.008192.000000=0
histogram.008192.000000.to.016384.000000=0
histogram.016384.000000.to.032768.000000=0
histogram.032768.000000.to.065536.000000=0
histogram.065536.000000.to.131072.000000=0
histogram.131072.000000.to.262144.000000=0
histogram.262144.000000.to.524288.000000=0
num.query.type.A=9419
num.query.type.PTR=8
num.query.type.AAAA=161889
num.query.type.SRV=28
num.query.type.HTTPS=192
num.query.class.IN=171536
num.query.opcode.QUERY=171536
num.query.tcp=136
num.query.tcpout=0
num.query.udpout=4380
num.query.tls=0
num.query.tls.resume=0
num.query.ipv6=0
num.query.https=0
num.query.flags.QR=0
num.query.flags.AA=0
num.query.flags.TC=0
num.query.flags.RD=171536
num.query.flags.RA=0
num.query.flags.Z=0
num.query.flags.AD=25
num.query.flags.CD=0
num.query.edns.present=161685
num.query.edns.DO=0
num.answer.rcode.NOERROR=82178
num.answer.rcode.FORMERR=0
num.answer.rcode.SERVFAIL=0
num.answer.rcode.NXDOMAIN=89355
num.answer.rcode.NOTIMPL=0
num.answer.rcode.REFUSED=0
num.answer.rcode.nodata=72787
num.query.ratelimited=0
num.answer.secure=0
num.answer.bogus=0
num.rrset.bogus=0
num.query.aggressive.NOERROR=0
num.query.aggressive.NXDOMAIN=0
unwanted.queries=0
unwanted.replies=0
msg.cache.count=1096
rrset.cache.count=977
infra.cache.count=2
key.cache.count=0
msg.cache.max_collisions=4
rrset.cache.max_collisions=3
dnscrypt_shared_secret.cache.count=0
dnscrypt_nonce.cache.count=0
num.query.dnscrypt.shared_secret.cachemiss=0
num.query.dnscrypt.replay=0
num.query.authzone.up=0
num.query.authzone.down=0

Gertjan

@bernieke

Ok.
Hummmm.
That info doesn't look suspicious at all.

How do you use your IP feeds ? Are they used so you, pfSense, and your LAN devices, can't connect to them ?
I mean, if these lists contains also DNS domain name servers, then that's a shoot in the foot situation.

So, what about the other way around :
Use some DNSBL lists,
but no IP lists (or have these list block for inbound only, not outbound, which will make them useless, as per default WAN rules, all inbound is already blocked anyway).

bernieke

@Gertjan This was all working fine up to Saturday evening.

I'm not sure what you're asking concerning the IP feeds, this is what I have configured for them:

I think it's a pretty standard setup.

I've just tried the following:

enable DSNBL in unbound (non-python) mode, with full reload: works fine
changed to python mode, with full reload: immediately have the problem again (30+% cpu usage of unbound, very slow recursion time with lots of time outs)
changed back to non-python mode, with full reload: works fine (and again only 3% unbound cpu usage)

So it seems the issue is pretty clearly with the python module? Unless you think the IP feeds could have a different effect in the unbound vs unbound-python module?

The only thing I'm seeing with the non-python mode is an unbound-control 100% cpu spike every few seconds, but that's not hurting my dns resolution in any way:

total.recursion.time.avg=0.031341

I switched to python mode a few weeks back since I needed to exclude our chromecast from the filtering, as some apps from the local broadcast networks wouldn't work otherwise.

I think I'm going to have a look at pi-hole or adguard home, and kick out pfblockerng altogether...

Gertjan

@bernieke said in Extremely slow DNS solved by disabling & re-enabling Python mode (unbound):

I'm not sure what you're asking concerning the IP feeds,

How you use your listed IP feeds.
If some of them are outbound blocking
and
the list contains DNS servers you use
then ... well, that's problematic.

@bernieke said in Extremely slow DNS solved by disabling & re-enabling Python mode (unbound):

So it seems the issue is pretty clearly with the python module?

I get what you mean.
But the thing is : not every pfSense user (a million or so ?) has pfBlockerng installed.
But some, a couple of hundred thousands ( ? ) do use this pfSense package, I'm just one of them.
We al have this single file in common. That's the "python module" file, ever-body is using that file. No other files are involved.
=> compare that file with yours.
Of course, there could be a bug. A bug you hit, and "no one" else... and that's why it way more plausible that it's a config (local setup) issue.
The question is : which one.

Btw : I'm using a 4100 with pfSense Plus 24.03, like you..
Only difference : you have a arm, I have a x86.

HLPPC

Maybe unbound and pfblocker should be set up before your cloud software and everything else. Immutable data types were just mentioned on youtube. I had to have a crack at threads misbehaving. You do have cache misses. Also you only have 4 gigs of memory.

Last time I ran wildcards in pfBlocker with it maxed out (and with Suicata maxed out) I ended up chewing through over 32 gigs of ram and halfway into a swap. With and without the python part it was and with and without suricata, it still took loads of memory.