Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Routing between two routers

    Routing and Multi WAN
    2
    4
    894
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • L
      Luich
      last edited by

      I have this problem. How can i make ping succesful from one computer to another if they are from a different subnet. Each computer is connected to a different SG-2440 to the Lan the interface. The two SG-2440 are connected through the OPT1 interface. The IP for the networks are 192.168.10.0/24 and 192.168.20.0/24.

      Should I make a new rule in the Firewall? Or is there a problem with the static route?

      Sorry for this post guys, I'm very new with networks and PFSense.

      1 Reply Last reply Reply Quote 0
      • DerelictD
        Derelict LAYER 8 Netgate
        last edited by

        https://doc.pfsense.org/index.php/Firewall_Rule_Basics

        https://doc.pfsense.org/index.php/Firewall_Rule_Troubleshooting

        Chattanooga, Tennessee, USA
        A comprehensive network diagram is worth 10,000 words and 15 conference calls.
        DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
        Do Not Chat For Help! NO_WAN_EGRESS(TM)

        1 Reply Last reply Reply Quote 0
        • L
          Luich
          last edited by

          I disable the firewall in order to see if it works, just to test. But it still does not ping the other computer.

          1 Reply Last reply Reply Quote 0
          • DerelictD
            Derelict LAYER 8 Netgate
            last edited by

            Check the local firewall and default gateway on that target computer then.

            Chattanooga, Tennessee, USA
            A comprehensive network diagram is worth 10,000 words and 15 conference calls.
            DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
            Do Not Chat For Help! NO_WAN_EGRESS(TM)

            1 Reply Last reply Reply Quote 0
            • First post
              Last post
            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.