PPPOE with VLAN to LAN with VLAN

[Maerad]

Hiya!

As of today, our ISP enforced the use of VLAN with their pppoe connection.
Now I added the VLAN to the pppoe and Internet works again, but our SIP connection won't.

Here the basic layout:

• PFSense Running on VMWARE ESXI, WAN = VLAN 4095 (means PFSense tags the needed VLAN), LAN = VLAN 4095
• PPPoE Modem (WAN Port PFSENSE with VLAN 7, PPPOE connected)
• LAN Port:
  Managed Switch with hybrid tagged/untagged. Every packet without VLAN 300 gets untagged with VLAN ID 1

• Interface1 (LAN) without VLAN, Switch untagged to VLAN 1

• Interface2 (VOICE) with VLAN 300, Switch tagged

I GUESS that the WAN connection tags the incoming packets with VLAN 7 and that's why the connection with/to the VLAN 300 won't work. The LAN Interface without VLAN works as it should, maybe because of the enforced tagging. So … any idea how to fix this?

Setting the Interface for LAN to VLAN 1 and change the switch to "tagged 1,300"? Can I remove the VLAN 7 from incoming pakets? Any other idea?

I already added VLAN 7 to tagged in the switch, even if it didn't make much sense ...

I'm honestly at a loss here

[stegbth]

Hi Merad,

was you able to fix this problem?

i have the same problem, my provider need a vlan as source for PPPoe.
PPPOe is working when using it without vlan.
But also assigning an IP to ibg0_vlan144 is working.

I am running PFsense 2.3.4p1 CE on APU2C4.

But it seems we are not the only one with this problem.
https://forum.pfsense.org/index.php?topic=118979.msg677260#msg677260

any ideas?

best regards
Thomas

[pfadmin]

Please make a picture of what ist what in your network. I don't know what you mean with "PPPoE Modem" and so on.

pfadmin