Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    "Cannot reach the Netgate Servers" - DNS problem

    Scheduled Pinned Locked Moved Problems Installing or Upgrading pfSense Software
    3 Posts 2 Posters 556 Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • N
      nachorobot
      last edited by

      I'm trying to re-install pfSense on a netgate 2100 that suffered an "EFI partition too small" problem during an upgrade.

      I have successfully run pfSense Installer - 24.06-beta-7, but it fails when trying to connect to Netgate's servers. Dropping back to shell I can ping 8.8.8.8, but can't run ntp or ping domain names.

      Reading multiple threads on this forum, it's my understanding that this is a failure of DNS. From the threads, it's my suspicion (based on this comment from @stephenw10) that this is because the 2100 is on a 192.168.1 subnet, and so is my network, which is structured as:

      WAN -> Ancient pfSense Appliance (192.168.1.10) -> New(ish) 2100
      

      That is, my connection to the outside world is going through another pfSense appliance that's providing DHCP addresses in the 192.168.1.* space (it's given the 2100 an address of 192.168.1.135). I checked the firewall logs, it isn't blocking anything from the 2100 that I can see.

      If I'm barking up the wrong tree, please let me know, and I'm happy to provide any other info that might be useful (daemon.log attached below, plus ifconfig). If this is, however, because I need to change the subnet on the 2100 ... I'm not really sure how to change my subnet, and any guidance would be appreciated.

      Thank you for your time, and thank you for helping to secure the internet!
      -CAT

      daemon.log.txt
      ifconfig:

      root@pfSense-install:~ # ifconfig
      mvneta0: flags=1008a43<UP,BROADCAST,RUNNING,ALLMULTI,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500
              options=800bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,LINKSTATE>
              ether 00:e0:ed:c4:71:6e
              inet 192.168.1.135 netmask 0xffffff00 broadcast 192.168.1.255
              inet6 fe80::2e0:edff:fec4:716e%mvneta0 prefixlen 64 scopeid 0x1
              media: Ethernet autoselect (1000baseT <full-duplex>)
              status: active
              nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
      mvneta1: flags=1008a43<UP,BROADCAST,RUNNING,ALLMULTI,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500
              options=bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM>
              ether 00:e0:ed:c4:71:6f
              inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
              inet6 fe80::2e0:edff:fec4:716f%mvneta1 prefixlen 64 scopeid 0x2
              media: Ethernet 2500Base-KX <full-duplex>
              status: active
              nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
      enc0: flags=0 metric 0 mtu 1536
              options=0
              groups: enc
              nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
      lo0: flags=1008049<UP,LOOPBACK,RUNNING,MULTICAST,LOWER_UP> metric 0 mtu 16384
              options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
              inet 127.0.0.1 netmask 0xff000000
              inet6 ::1 prefixlen 128
              inet6 fe80::1%lo0 prefixlen 64 scopeid 0x9
              groups: lo
              nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
      pflog0: flags=0 metric 0 mtu 33152
              options=0
              groups: pflog
      pfsync0: flags=0 metric 0 mtu 1500
              options=0
              maxupd: 128 defer: off version: 1400
              syncok: 1
              groups: pfsync
      
      1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by

        Yes, that's the issue. You can change the LAN subnet temporarily during the install:
        https://docs.netgate.com/pfsense/en/latest/install/install-walkthrough.html#configure-lan-interface

        Set it to any other subnet like 192.168.2.1/24

        Steve

        N 1 Reply Last reply Reply Quote 1
        • N
          nachorobot @stephenw10
          last edited by

          @stephenw10 Thank you!
          I struggled to reassign the LAN interface. I was told that I could not set it to a 192.168.2.1/24 subdomain. I thought I had taken notes of that episode, but I can't seem to find them. It would not surprise me if I was mistyping something (I'm not dyslexic, but I sure seem to be when it comes to correctly choosing "LAN" or "WAN").
          However, after re-reading the link you provided I was able to set the LAN interface to None, which allowed installation to proceed.
          Thank you for your assistance! I have a new struggle getting my legacy settings installed, but I want to wrestle with that a bit more before returning here.

          1 Reply Last reply Reply Quote 1
          • First post
            Last post
          Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.