Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Help with multiple wan configuration

    Routing and Multi WAN
    1
    2
    384
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • S
      scatt
      last edited by

      Hi there,
      i'm running pfsense for a while to use load balancing with my 2 wan, but now i have a bit of trouble.

      Since a couple of days the setup was:
      Wan1(78.26.x.x)
      Wan2(192.168.2.1/24)
      Lan(192.168.1.1/24)
      Every was working for wan1, some little trouble with FTP and other with wan2 but normal web surfing was acceptable.

      Now i have changed the setup as follow:
      Wan1(78.26.x.x)
      Wan2(172.16.1.1/24)
      Lan(192.168.1.1/16)
      as before Wan1 is correcly working, no problem at all, but on the other wan i continue having blocked traffic,```
      Default deny rule IPv4 (@4)   172.16.1.2:64138   216.58.205.101:443

      
On wan1 i have multiple static ip adresses and since i use only 1 i have used one of the other for the wan1 interface on firewall, but on the other interface i don't have other ips, i'm quite sure that the wan2 setup is not ideal, can someone help me to solve this issue?
      1 Reply Last reply Reply Quote 0
      • S
        scatt
        last edited by

        based on my research i have figured out that should be a double nat problem, i will open a post on the NAT section

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.