24.03 install failed in 1 out of 3

stephenw10

Duplicating messages:
Are you able to get a crash report after that panic?

Are you using xn NICs?

maverickws

@stephenw10
No unfortunately from what I was able to see I am not able to get a crash report after the panic.
The NIC's show as xn yes.

# lspci | grep -E -i --color 'network|ethernet'
23:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)

maverickws

here's the backtrace:

db> bt
Tracing pid 0 tid 100000 td 0xffffffff8303de40
kdb_enter() at kdb_enter+0x33/frame 0xffffffff83f0c890
panic() at panic+0x43/frame 0xffffffff83f0c8f0
trap_fatal() at trap_fatal+0x40f/frame 0xffffffff83f0c950
trap_pfault() at trap_pfault+0x4f/frame 0xffffffff83f0c9b0
calltrap() at calltrap+0x8/frame 0xffffffff83f0c9b0
--- trap 0xc, rip = 0xffffffff8128c005, rsp = 0xffffffff83f0ca88, rbp = 0xffffffff83f0cad0 ---
xen_start32() at xen_start32+0x5/frame 0xffffffff83f0cad0
xenpci_attach() at xenpci_attach+0x207/frame 0xffffffff83f0cb10
device_attach() at device_attach+0x3b5/frame 0xffffffff83f0cb60
bus_generic_attach() at bus_generic_attach+0x4b/frame 0xffffffff83f0cb90
pci_attach() at pci_attach+0xcb/frame 0xffffffff83f0cbd0
acpi_pci_attach() at acpi_pci_attach+0x17/frame 0xffffffff83f0cc10
device_attach() at device_attach+0x3b5/frame 0xffffffff83f0cc60
bus_generic_attach() at bus_generic_attach+0x4b/frame 0xffffffff83f0cc90
acpi_pcib_acpi_attach() at acpi_pcib_acpi_attach+0x42f/frame 0xffffffff83f0ccf0
device_attach() at device_attach+0x3b5/frame 0xffffffff83f0cd40
bus_generic_attach() at bus_generic_attach+0x4b/frame 0xffffffff83f0cd70
acpi_probe_children() at acpi_probe_children+0x237/frame 0xffffffff83f0cdd0
acpi_attach() at acpi_attach+0x972/frame 0xffffffff83f0ce60
device_attach() at device_attach+0x3b5/frame 0xffffffff83f0ceb0
bus_generic_attach() at bus_generic_attach+0x4b/frame 0xffffffff83f0cee0
device_attach() at device_attach+0x3b5/frame 0xffffffff83f0cf30
bus_generic_new_pass() at bus_generic_new_pass+0x127/frame 0xffffffff83f0cf60
root_bus_configure() at root_bus_configure+0x36/frame 0xffffffff83f0cf90
configure() at configure+0x9/frame 0xffffffff83f0cfa0
mi_startup() at mi_startup+0x1c8/frame 0xffffffff83f0cff0
db>

stephenw10

Aha, this is good. So it's something Xen specific by the looks of it. Let's see...

stephenw10

Are you able to get the console out put leading up to the panic so we can see what was attaching?

I note that 24.03 is built on FreeBSD15 and 23.09.X is FreeBSD14 so there could be incompatibility there. What version of Xen (or XCP) are you using?

maverickws

@stephenw10 hi

I can try to either do a screen recording or halt the VM prior to boot, plug the console and get the output.
I'll get back to this.

Now I have a small question about this FreeBSD versioning:
FreeBSD 14.1 was released June 2024
FreeBSD 15 official release schedule points it to be released in December 2025

How exactly are we already on FreeBSD 15 here? How ready for production is it?

Xen version is latest

# cat /etc/os-release 
NAME="XCP-ng"
VERSION="8.2.1"
ID="xenenterprise"
ID_LIKE="centos rhel fedora"
VERSION_ID="8.2.1"
PRETTY_NAME="XCP-ng 8.2.1"
ANSI_COLOR="0;31"
HOME_URL="http://xcp-ng.org/"
BUG_REPORT_URL="https://github.com/xcp-ng/xcp"

stephenw10

For our purposes, ready. I've run it up to our devs. Let's see what they say.

Unfortunately, as I say, I don't think any of them are running Xen/XCP any longer.

stephenw10

You're not using any special packages or modules for Xen I assume?

Like xe-guest-utilities?

maverickws

@stephenw10 No I am not, quite plain install.

Mind if I was why were you questioning about the xn network interfaces? Do they have some known issues?

By default none of the VM's had guest utilities installed.
Yesterday on my last attempt I installed xe-guest-utilities to see if that would render some difference, but nothing.

stephenw10

I asked about xn because it's an unusual NIC type. There are default configs for some NICs types like em and igb and none for xn, hn, virtio etc. If you had the hypervisor configured to present e1000 NICs it might have behaved differently.

It appears to be an issue when trying to attach something Xen specific but it's not clear just from the backtrace what that is. It may be possible to simply disable it.

maverickws

Alright so I'll try to come back and present a better output of what happens previous to the crash. I'm completely unable to do it now but I'll try to do it today still.

stephenw10

Thanks, that should help a lot.

maverickws

Hello again,

I'm sorry but it was impossible for me to do this last week.

In the meanwhile I proceeded and captured the whole boot from the Boot Screen to the crash.

   Autoboot in 0 seconds. [Space] to pause 

Loading kernel...
/boot/kernel/kernel text=0x19eec0 text=0xff4c38 text=0x17e3db4 data=0x180 data=0x22d718+0x3d18e8 0x8+0x1cb0f0+0x8+0x1da290
Loading configured modules...
/boot/entropy size=0x1000
/boot/kernel/zfs.ko size 0x5ea9a0 at 0x35a7000
/boot/kernel/opensolaris.ko size 0x1e2f0 at 0x3b92000
/boot/kernel/cryptodev.ko size 0x7718 at 0x3bb1000
can't find '/etc/hostid'
staging 0x73600000-0x779e3000 (not copying) tramp 0x779e3000 PT4 0x779e4000
Start @ 0xffffffff8039f000 ...
EFI framebuffer information:
addr, size     0xf0000000, 0x240000
dimensions     1024 x 768
stride         1024
masks          0x00ff0000, 0x0000ff00, 0x000000ff, 0x00000000
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
---<<BOOT>>---
Copyright (c) 1992-2024 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 15.0-CURRENT #0 plus-RELENG_24_03-n256311-e71f834dd81: Fri Apr 19 00:28:14 UTC 2024
    root@freebsd:/var/jenkins/workspace/pfSense-Plus-snapshots-24_03-main/obj/amd64/Y4MAEJ2R/var/jenkins/workspace/pfSense-Plus-snapshots-24_03-main/sources/FreeBSD-src-plus-RELENG_24_03/amd64.amd64/sys/pfSense amd64
FreeBSD clang version 17.0.6 (https://github.com/llvm/llvm-project.git llvmorg-17.0.6-0-g6009708b4367)
VT(efifb): resolution 1024x768
Hyper-V Version: 0.0.0 [SP0]
  Features=0x870<APIC,HYPERCALL,VPINDEX,TMFREQ>
  PM Features=0x0 [C0]
  Features3=0x8<PCPUDPE>
CPU: AMD Ryzen 5 3600 6-Core Processor               (3593.36-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x870f10  Family=0x17  Model=0x71  Stepping=0
  Features=0x1783fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0xfed83203<SSE3,PCLMULQDQ,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND,HV>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x40001f3<LAHF,CMP,CR8,ABM,SSE4A,MAS,Prefetch,DBE>
  Structured Extended Features=0x219c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA>
  Structured Extended Features2=0x400004<UMIP,RDPID>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  AMD Extended Feature Extensions ID EBX=0x1005<CLZERO,XSaveErPtr,IBPB>
Hypervisor: Origin = "Microsoft Hv"
real memory  = 2143289344 (2044 MB)
avail memory = 2012315648 (1919 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <Xen HVM>
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0: MADT APIC ID 1 != hw id 0
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-47
TCP_ratelimit: Is now initialized
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80750310, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff807503c0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80750470, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff80770010, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff807700c0, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80770170, 0) error 1
random: entropy device external interface
wlan: mac acl policy registered
kbd1 at kbdmux0
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0.
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
netgate0: <unknown hardware>
smbios0: <System Management BIOS> at iomem 0x7f3cc000-0x7f3cc01e
smbios0: Version: 2.8, BCD Revision: 2.8
acpi0: <Xen>
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 62500000 Hz quality 950
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xb008-0xb00b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc1a0-0xc1af at device 1.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
uhci0: <Intel 82371SB (PIIX3) USB controller> port 0xc180-0xc19f irq 23 at device 1.2 on pci0
usbus0 on uhci0
pci0: <bridge> at device 1.3 (no driver attached)
vgapci0: <VGA-compatible display> mem 0xf0000000-0xf1ffffff,0xf3042000-0xf3042fff at device 2.0 on pci0
vgapci0: Boot video device
xenpci0: <Xen Platform Device> port 0xc000-0xc0ff mem 0xf2000000-0xf2ffffff irq 28 at device 3.0 on pci0


Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address	= 0x2dee022
fault code		= supervisor read data, page not present
instruction pointer	= 0x20:0xffffffff8128c005
stack pointer	        = 0x28:0xffffffff83f0da88
frame pointer	        = 0x28:0xffffffff83f0dad0
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 0 (swapper)
rdi: 0000000000000000 rsi: ffffffff83f0da98 rdx: 0000000000000009
rcx: 0000000000001800  r8: 0000000000000007  r9: 0000000000000002
rax: 0000000002dee022 rbx: fffff800016fc000 rbp: ffffffff83f0dad0
r10: 0000000000000000 r11: ffffffff83f0d8f4 r12: ffffffff82d5aee0
r13: fffff800017c0690 r14: fffff800016fc600 r15: 0000000000001800
trap number		= 12
panic: page fault
cpuid = 0
time = 1
KDB: enter: panic
[ thread pid 0 tid 100000 ]
Stopped at      kdb_enter+0x33: movq    $0,0x235af42(%rip)

Hope this helps.

stephenw10

Ah, yup hopefully that will help.