Bug in Broadcom bnxt driver in combination with VLANs
-
@Delegator5042
I did a clean install for pfsense 2.6 and restored the old configuration backup. That went perfectly smooth. After that, as @stephenw10 already suggested, I went to System > Update and changed the desired branch to 2.6, so I could download packages again. -
@tmoehle
Encouraging to hear! I will give it a(nother) proper go then.
Silly me just read an old forum posts about the packages requiring an update, which I somehow can't find anymore so I probably didn't read something correct when I was looking for a place to download 2.6 -
@tmoehle Sorry for prying a lot, but do the VLANs on your NIC really work?
I installed 2.6 and the NIC works without VLANs.
When I create a VLAN and assign it to an interface, No traffic gets through (oddly enough the DHCP does work)
When I set a different network port (non bnxt) with the same VLAN to the same configured interface, it all works (albeit I have to reload firewall rules first).I am hoping that I am doing something wrong, since DHCP somehow still works on the VLAN with bnxt, but I don't see any issues with the gateway and the firewall rule permits the traffic.
-
@Delegator5042 My VLANs are working perfectly fine, yes. If your DHCP is working within those VLANs and pfsense is your only DHCP server, then chances are you overlook something.
-
This should now be fixed in the next 23.09 snapshots if anyone can test that.
Steve
-
@stephenw10 Will it only go into 23.09 or will there also be an update for CE?
-
It's fixed upstream in FreeBSD so it will be pulled into new CE builds.
-
@stephenw10 Hi. With pfsense version 2.7.0 im still facing this issue.
Will it get resolved in 2.7.2 or should i downgrade?
-
-
Yes that patch is in 2.7.2: https://github.com/pfsense/FreeBSD-src/commit/21d49ce6efe3883beef6d5456a3bda4194028b01
-
@stephenw10 Thank You. Let me try the same.
