IPSEC > Routing traffic from A Site to C Site through B site
-
Dear Community,
I hope that whoever reads this post is doing fine,
About this topic, i would like to know if someone has created the following environment, or knows something about it.Multiple A sites communicates with a single host in B site.
Now i need to use B site as an intermediary between A sites and C site.
So any traffic between A will flow to C site through B site, and viceversaAny ideas will be greatly appreciated
Warm Regards -
@DiegoEspinozaP said in IPSEC > Routing traffic from A Site to C Site through B site:
Multiple A sites communicates with a single host in B site.
Are these site to site IPSec?
If so, policy-based or routed? -
@viragomann Hi there,
So... i have many IPSEC A sites and hosts that send traffic to a single host in IPSEC B site.
And those are IPSEC tunnels.
Should i try with routed vti s2s?Warm Regards
-
@DiegoEspinozaP
No, you can also go with policy-based, but it's relevant for how to set it up. In routed IPSec you can just add static routes to route the traffic properly.
If you're using tunnels you have to add a phase 2 for A-C to both connections.This means in the A-B IPSec at A:
local: A subnets
remote: C subnets
In B-C at B you have to do the same.And at B in A-B and at C in B-C:
local: C subnets
remote: A subnets -
@viragomann Hi!
Thanks a lot, ill try and let you know the resultWarm Regards