Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Pfsense on proxmox with omada

    Scheduled Pinned Locked Moved General pfSense Questions
    4 Posts 2 Posters 908 Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • J
      Judg3d
      last edited by

      I have been having trouble with a minipc that i previously successfully deployed (for personal) where I have proxmox OS with a pfsense VM and an omada lxc.

      The Network looks like

      MiniPC router (proxmox, pfsense, omada lxc) > Main Switch (2 AP attached) > Garage Switch (1 AP attached)

      All these devices are on the default LAN, I have VLAN setup for other stuff but the problem I am having is the default LAN.

      Subnet is 10.0.0.1/24 (not real)
      Main Switch is 10.0.0.116, Garage Switch is 10.0.0.121

      Proxmox is 10.0.0.50, omada is 10.0.0.102

      From pfsense I can ping all the switches, AP, proxmox host and omada lxc. I cannot ping or access the switches from proxmox host and omada lxc ( I assume if i fixed the proxmox host issue omada will work)

      The networking on proxmox is

      Eth1 (not real but its the physical rj45) to vmbr0 with no config as its used for WAN port on pfsense

      Eth2 (not real but its the physical rj45) to vmbr1, set with 10.0.0.50/24, 10.0.0.1 as gateway, VLAN aware, and set as pfsense LAN

      Omada has a static IP from pfsense under vmbr1.

      In pfsense LAN has wide open firewall rules and i never set any for proxmox.

      I have DNS resolver enabled with default settings, I had to change the /etc/resolv.conf DNS nameserver from my old network which i made this minipc on to 10.0.0.1 which fixed my DNS issues.

      I need help figuring out why my proxmox host and omada lxc wont reach the switches.

      1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by

        Does Proxmox only have an IP in the pfSense LAN subnet?

        Access from Omada to the switches pretty much has to be something in Proxmox. Something with a bad subnet mask set perhaps?

        What error is shown when you try to ping and it fails?

        Steve

        J 1 Reply Last reply Reply Quote 0
        • J
          Judg3d @stephenw10
          last edited by

          @stephenw10 yes proxmox and omada both have static IP from pfsense and can be pinged from pfsense it self.
          The only error I could find at least is the ping failed after I Ctrl+C for the icmp test. 0% success rate.

          1 Reply Last reply Reply Quote 0
          • stephenw10S
            stephenw10 Netgate Administrator
            last edited by

            Hmm, OK well it either has an ARP entry or a route for that device then. It should be sending directly since it's in the same subnet.

            Something must be blocking it.

            1 Reply Last reply Reply Quote 0
            • First post
              Last post
            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.