Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Can't assign NIC [Aquantia Corp. AQC107]

    Scheduled Pinned Locked Moved Hardware
    81 Posts 14 Posters 20.8k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • K
      kouled @Gertjan
      last edited by

      I end up with error <=> I can't compile the driver...

      /usr/src/aqtion-freebsd-0.0.5/aq_main.c:197:57: error: too many arguments provided to function-like macro invocation
      197 | DRIVER_MODULE(atlantic, pci, aq_driver, aq_devclass, 0, 0);
      | ^
      /usr/include/sys/bus.h:854:9: note: macro 'DRIVER_MODULE' defined here
      854 | #define DRIVER_MODULE(name, busname, driver, evh, arg)
      | ^
      fatal error: too many errors emitted, stopping now [-ferror-limit=]

      In the main the function put 5 arguments in the bus.h that function is only expecting 5 arguments.. mismatch

      the code is not working properly

      I have no idea how I can run my 10g network card on my pfsense :-(

      1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by

        What were you compiling against? For which pfSense version?

        K 1 Reply Last reply Reply Quote 0
        • K
          kouled @stephenw10
          last edited by

          @stephenw10
          I was compiling on a Virtual Machine running freebsd 14.1 (couldn't get the 14.0 as my pfsense version) / kernel 2.7.2 as my pfsense version...

          I was compiling the source C for the network card 10g

          The driver for the card I have exist for a kernel >= 3.10

          So no package / driver for any 10G card :-(

          So I'm stuck and very frustaded

          stephenw10S 1 Reply Last reply Reply Quote 0
          • stephenw10S
            stephenw10 Netgate Administrator @kouled
            last edited by

            @kouled said in Can't assign NIC [Aquantia Corp. AQC107]:

            The driver for the card I have exist for a kernel >= 3.10

            That's almost certainly a Linux kernel and FreeBSD is not Linux.

            Did you checkout the FreeBSD git source from the correct commit hash as shown above?

            K 1 Reply Last reply Reply Quote 0
            • K
              kouled @stephenw10
              last edited by

              @stephenw10 I did and I found the above topic from onoseto on Apr 25 2024 at 6:43PM

              Attaching the Aquantia driver for latest pfSense (2.7.2) ....

              I try to follow but I get errors.

              It's just pity

              1 Reply Last reply Reply Quote 0
              • stephenw10S
                stephenw10 Netgate Administrator
                last edited by

                Hmm, and you're tying to compile the kmod pkg? I'm confused about where that Linux kernel reference came from?

                K 1 Reply Last reply Reply Quote 0
                • B
                  BlackPope
                  last edited by BlackPope

                  I get erorr
                  cat: net/aquantia-atlantic-kmod: No such file or directory
                  and
                  [00:00:00] Error: [79799] /usr/local/share/poudriere/bulk.sh:mount_ports:6:Missing mnt metadata for portstree

                  1 Reply Last reply Reply Quote 0
                  • K
                    kouled @stephenw10
                    last edited by

                    @stephenw10 the référence comme from the contrcutor of the network card <=> they say kernel >= 3.10...

                    But the issue is that I have the same NIC Aquantia Corp. AQC107 I can see listing the device on the pfsense running the command pciconf -lv

                    The output is:

                    none0@pci0:1:0:0: class=0x020000 rev=0x02 hdr=0x00 vendor=0x1d6a device=0x07b1 subvendor=0x1d6a subdevice=0x0001
                    vendor = 'Aquantia Corp.'
                    device = 'AQC107 NBase-T/IEEE 802.3bz Ethernet Controller [AQtion]'
                    class = network
                    subclass = ethernet

                    So the card is seen by freebsd...

                    But I'm stuck cause no package / no compilation possible
                    Any help will be greatful

                    Warm regards

                    stephenw10S K 2 Replies Last reply Reply Quote 0
                    • stephenw10S
                      stephenw10 Netgate Administrator @kouled
                      last edited by

                      @kouled said in Can't assign NIC [Aquantia Corp. AQC107]:

                      the référence comme from the contrcutor of the network card <=> they say kernel >= 3.10...

                      You have a link to that?

                      @kouled said in Can't assign NIC [Aquantia Corp. AQC107]:

                      So the card is seen by freebsd

                      It's seen as a PCIe device on the bus but it's not recognised by any driver so not usable at that point.

                      1 Reply Last reply Reply Quote 0
                      • K
                        kouled @kouled
                        last edited by

                        @kouled

                        https://www.tp-link.com/us/support/download/tx401/

                        1 Reply Last reply Reply Quote 0
                        • stephenw10S
                          stephenw10 Netgate Administrator
                          last edited by

                          There's no FreeBSD driver there, only Linux. And FreeBSD is not Linux!

                          So that driver will never work in pfSense and the kernel reference is only relevant for Linux.

                          You need to compile it from the FreeBSD source to have any chance.

                          K 1 Reply Last reply Reply Quote 0
                          • K
                            kouled @stephenw10
                            last edited by

                            @stephenw10

                            Indeed, so I try but it doesn't work

                            I build a freebsd VM and install the appropriate package to be able to compile...

                            I get the source https://github.com/Aquantia/aqtion-freebsd

                            But I get error:

                            usr/src/aqtion-freebsd-0.0.5/aq_main.c:197:57: error: too many arguments provided to function-like macro invocation
                            197 | DRIVER_MODULE(atlantic, pci, aq_driver, aq_devclass, 0, 0);
                            | ^
                            /usr/include/sys/bus.h:854:9: note: macro 'DRIVER_MODULE' defined here
                            854 | #define DRIVER_MODULE(name, busname, driver, evh, arg)
                            | ^
                            fatal error: too many errors emitted, stopping now [-ferror-limit=]

                            In the main the function put 5 arguments in the bus.h that function is only expecting 5 arguments.. mismatch

                            the code is not working properly

                            I study the C a long time ago (I'm old :-) ) and I never used after.

                            1 Reply Last reply Reply Quote 0
                            • First post
                              Last post
                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.