port alias not found
-
I had to reboot my pfsense this morning due to a configuration issue but now i am getting the following message
From my understanding, this should be a built-in port alias. Any reason why its not being picked up?
-
What version is that? Is MIM enabled?
If so does the port show as populated in Sys > Adv > MIM? Like:
-
-
@stephenw10 Pfnet Controller Daemon service was not running after reload. Interesting. Shouldnt the service start automatically? I know its Beta so maybe its not configured to do so yet?
-
Yes, it should start. Anything logged at boot showing it fail?
But that would explain why the alias wasn't populated.
Also I forgot that info in the webgui is new 25.03 so you won't see it in 24.11. It's useful in this sort of situation though!
-
Not sure what to look for in the log at start up but I'm posting the output of 'dmesg"
dmesg ---<<BOOT>>--- Copyright (c) 1992-2024 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 15.0-CURRENT #0 plus-RELENG_24_11-n256407-1bbb3194162: Fri Nov 22 05:08:46 UTC 2024 root@freebsd:/var/jenkins/workspace/pfSense-Plus-snapshots-24_11-main/obj/amd64/AKWlAIiM/var/jenkins/workspace/pfSense-Plus-snapshots-24_11-main/sources/FreeBSD-src-plus-RELENG_24_11/amd64.amd64/sys/pfSense amd64 FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) VT(vga): resolution 640x480 CPU: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz (2200.21-MHz K8-class CPU) Origin="GenuineIntel" Id=0x506f1 Family=0x6 Model=0x5f Stepping=1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x101<LAHF,Prefetch> Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> IA32_ARCH_CAPS=0xc69<RDCL_NO,SKIP_L1DFL_VME,MDS_NO> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8146931712 (7769 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <INSYDE H2O BIOS> WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. ioapic0 <Version 2.0> irqs 0-119 Launching APs: 3 1 2 TCP_ratelimit: Is now initialized ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff807543a0, 0) error 1 ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80754450, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80754500, 0) error 1 iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff80773fb0, 0) error 1 iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80774060, 0) error 1 iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80774110, 0) error 1 random: entropy device external interface wlan: mac acl policy registered kbd0 at kbdmux0 WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s netgate0: <Netgate 6100> netgate0: version: 0.1 vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0x7c51b000-0x7c51b017 smbios0: Version: 3.0 acpi0: <INSYDE H2O BIOS> acpi0: Power Button (fixed) unknown: I/O range not supported cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 24000000 Hz quality 950 Event timer "HPET" frequency 24000000 Hz quality 550 Event timer "HPET1" frequency 24000000 Hz quality 440 Event timer "HPET2" frequency 24000000 Hz quality 440 Event timer "HPET3" frequency 24000000 Hz quality 440 Event timer "HPET4" frequency 24000000 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <processor> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> mem 0x81600000-0x8161ffff at device 10.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> mem 0x81620000-0x8163ffff at device 11.0 on pci0 pci3: <ACPI PCI bus> on pcib3 nvme0: <Generic NVMe Device> mem 0x80700000-0x80703fff at device 0.0 on pci3 pcib4: <ACPI PCI-PCI bridge> mem 0x81640000-0x8165ffff at device 12.0 on pci0 pci4: <ACPI PCI bus> on pcib4 igc0: <Intel(R) Ethernet Controller I225-V> mem 0x81300000-0x813fffff,0x81400000-0x81403fff at device 0.0 on pci4 igc0: Using 1024 TX descriptors and 1024 RX descriptors igc0: Using 4 RX queues 4 TX queues igc0: Using MSI-X interrupts with 5 vectors igc0: Ethernet address: 90:ec:77:34:ce:dc igc0: netmap queues/slots: TX 4/1024, RX 4/1024 pcib5: <ACPI PCI-PCI bridge> mem 0x81660000-0x8167ffff at device 14.0 on pci0 pci5: <ACPI PCI bus> on pcib5 igc1: <Intel(R) Ethernet Controller I225-V> mem 0x81100000-0x811fffff,0x81200000-0x81203fff at device 0.0 on pci5 igc1: Using 1024 TX descriptors and 1024 RX descriptors igc1: Using 4 RX queues 4 TX queues igc1: Using MSI-X interrupts with 5 vectors igc1: Ethernet address: 90:ec:77:34:ce:dd igc1: netmap queues/slots: TX 4/1024, RX 4/1024 pcib6: <ACPI PCI-PCI bridge> mem 0x81680000-0x8169ffff at device 15.0 on pci0 pci6: <ACPI PCI bus> on pcib6 igc2: <Intel(R) Ethernet Controller I225-V> mem 0x80f00000-0x80ffffff,0x81000000-0x81003fff at device 0.0 on pci6 igc2: Using 1024 TX descriptors and 1024 RX descriptors igc2: Using 4 RX queues 4 TX queues igc2: Using MSI-X interrupts with 5 vectors igc2: Ethernet address: 90:ec:77:34:ce:de igc2: netmap queues/slots: TX 4/1024, RX 4/1024 pcib7: <ACPI PCI-PCI bridge> mem 0x816a0000-0x816bffff at device 16.0 on pci0 pci7: <ACPI PCI bus> on pcib7 igc3: <Intel(R) Ethernet Controller I225-V> mem 0x80d00000-0x80dfffff,0x80e00000-0x80e03fff at device 0.0 on pci7 igc3: Using 1024 TX descriptors and 1024 RX descriptors igc3: Using 4 RX queues 4 TX queues igc3: Using MSI-X interrupts with 5 vectors igc3: Ethernet address: 90:ec:77:34:ce:df igc3: netmap queues/slots: TX 4/1024, RX 4/1024 pcib8: <ACPI PCI-PCI bridge> mem 0x816c0000-0x816dffff at device 17.0 on pci0 pci8: <ACPI PCI bus> on pcib8 xhci0: <Intel Denverton USB 3.0 controller> mem 0x816e0000-0x816effff at device 21.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pcib9: <ACPI PCI-PCI bridge> at device 22.0 on pci0 pci9: <ACPI PCI bus> on pcib9 ix0: <Intel(R) X553 N (SFP+)> mem 0x80400000-0x805fffff,0x80604000-0x80607fff at device 0.0 on pci9 ix0: Using 2048 TX descriptors and 2048 RX descriptors ix0: Using 4 RX queues 4 TX queues ix0: Using MSI-X interrupts with 5 vectors ix0: allocated for 4 queues ix0: allocated for 4 rx queues ix0: Ethernet address: 90:ec:77:34:ce:da ix0: eTrack 0x8000084b PHY FW V65535 ix0: netmap queues/slots: TX 4/2048, RX 4/2048 ix1: <Intel(R) X553 N (SFP+)> mem 0x80200000-0x803fffff,0x80600000-0x80603fff at device 0.1 on pci9 ix1: Using 2048 TX descriptors and 2048 RX descriptors ix1: Using 4 RX queues 4 TX queues ix1: Using MSI-X interrupts with 5 vectors ix1: allocated for 4 queues ix1: allocated for 4 rx queues ix1: Ethernet address: 90:ec:77:34:ce:db ix1: eTrack 0x8000084b PHY FW V65535 ix1: netmap queues/slots: TX 4/2048, RX 4/2048 pcib10: <ACPI PCI-PCI bridge> at device 23.0 on pci0 pci10: <ACPI PCI bus> on pcib10 ix2: <Intel(R) X553 L (1GbE)> mem 0x80a00000-0x80bfffff,0x80c04000-0x80c07fff at device 0.0 on pci10 ix2: Using 2048 TX descriptors and 2048 RX descriptors ix2: Using 4 RX queues 4 TX queues ix2: Using MSI-X interrupts with 5 vectors ix2: allocated for 4 queues ix2: allocated for 4 rx queues ix2: Ethernet address: 90:ec:77:34:ce:d9 ix2: eTrack 0x80000889 ix2: netmap queues/slots: TX 4/2048, RX 4/2048 ix3: <Intel(R) X553 L (1GbE)> mem 0x80800000-0x809fffff,0x80c00000-0x80c03fff at device 0.1 on pci10 ix3: Using 2048 TX descriptors and 2048 RX descriptors ix3: Using 4 RX queues 4 TX queues ix3: Using MSI-X interrupts with 5 vectors ix3: allocated for 4 queues ix3: allocated for 4 rx queues ix3: Ethernet address: 90:ec:77:34:ce:d8 ix3: eTrack 0x80000889 ix3: netmap queues/slots: TX 4/2048, RX 4/2048 pci0: <simple comms> at device 24.0 (no driver attached) sdhci_pci0: <Intel Denverton eMMC 5.0 Controller> mem 0x816f6000-0x816f6fff,0x816f7000-0x816f7fff at device 28.0 on pci0 sdhci_pci0: 1 slot(s) allocated mmc0: <MMC/SD bus> on sdhci_pci0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 pci0: <memory> at device 31.2 (no driver attached) pci0: <serial bus> at device 31.5 (no driver attached) acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 16 flags 0x10 on acpi0 ns8250: UART FCR is broken uart0: console (115200,n,8,1) uart1: <Non-standard ns8250 class UART with FIFOs> port 0x2f8-0x2ff irq 17 on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounter "TSC-low" frequency 1100000098 Hz quality 1000 Timecounters tick every 1.000 msec ugen0.1: <Intel XHCI root HUB> at usbus0 uhub0 on usbus0 uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) nvme0: Allocated 16MB host memory buffer mmcsd0: 16GB <MMCHC TB2916 9.0 SN 079466A9 MFG 12/2021 by 112 0x0000> at mmc0 50.0MHz/8bit/65535-block mmcsd0boot0: 4MB partition 1 at mmcsd0 mmcsd0boot1: 4MB partition 2 at mmcsd0 mmcsd0rpmb: 4MB partition 3 at mmcsd0 Trying to mount root from zfs:pfSense/ROOT/default_clone []... uhub0: 8 ports with 8 removable, self powered ugen0.2: <CPS GX1500U> at usbus0 Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM nda0 at nvme0 bus 0 scbus0 target 0 lun 1 nda0: <M.2 (P80) 3TE6 V20B09 YCA12203170170376> nda0: Serial Number YCA12203170170376 nda0: nvme version 1.3 nda0: 114473MB (234441648 512 byte sectors) Netgate Cordoba GPIO Driver 0.4 loaded cordbuc0: <Netgate Cordoba IO controller> at port 0x800 on isa0 gpio0: <Cordoba uC GPIO controller> on cordbuc0 gpiobus0: <GPIO bus> on gpio0 gpioled0: <GPIO led> at pin 0 on gpiobus0 gpioled1: <GPIO led> at pin 1 on gpiobus0 gpioled10: <GPIO led> at pin 10 on gpiobus0 gpioled11: <GPIO led> at pin 11 on gpiobus0 gpioled2: <GPIO led> at pin 2 on gpiobus0 gpioled3: <GPIO led> at pin 3 on gpiobus0 gpioled4: <GPIO led> at pin 4 on gpiobus0 gpioled5: <GPIO led> at pin 5 on gpiobus0 gpioled6: <GPIO led> at pin 6 on gpiobus0 gpioled7: <GPIO led> at pin 7 on gpiobus0 gpioled8: <GPIO led> at pin 8 on gpiobus0 gpioled9: <GPIO led> at pin 9 on gpiobus0 gpioc0: <GPIO controller> on gpio0 CPU: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz (2200.00-MHz K8-class CPU) Origin="GenuineIntel" Id=0x506f1 Family=0x6 Model=0x5f Stepping=1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x101<LAHF,Prefetch> Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> IA32_ARCH_CAPS=0x14000c69<RDCL_NO,SKIP_L1DFL_VME,MDS_NO> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr TSC: P-state invariant, performance statistics ichsmb0: <Intel Denverton SMBus controller> port 0x2000-0x201f mem 0x816f8000-0x816f80ff at device 31.4 on pci0 smbus0: <System Management Bus> on ichsmb0 qat0: <Intel c3xxx QuickAssist> mem 0x81500000-0x8153ffff,0x81540000-0x8157ffff at device 0.0 on pci1 qat0: qat_dev0 started 6 acceleration engines qat0: FW version: 4.18.0 qat0: Excessive clock measure delay qat_ocf0: <QAT engine> wg0: changing name to 'tun_wg1' tun_wg1: link state changed to UP igc0: link state changed to UP igc1: link state changed to UP igc2: link state changed to UP igc3: link state changed to UP wg1: changing name to 'tun_wg0' tun_wg0: link state changed to UP coretemp0: <CPU On-Die Thermal Sensors> on cpu0 lo0: link state changed to UP igc2: link state changed to DOWN vlan0: changing name to 'igc2.23' vlan1: changing name to 'igc2.14' vlan2: changing name to 'igc2.15' vlan3: changing name to 'igc2.11' vlan4: changing name to 'igc2.17' vlan5: changing name to 'igc2.1234' vlan6: changing name to 'igc2.2' vlan7: changing name to 'igc2.6' igc3: link state changed to DOWN igc2: link state changed to UP igc2.17: link state changed to UP igc2.2: link state changed to UP igc2.6: link state changed to UP igc2.23: link state changed to UP igc2.1234: link state changed to UP igc2.11: link state changed to UP igc2.14: link state changed to UP igc2.15: link state changed to UP igc3: link state changed to UP igc0: link state changed to DOWN igc1: link state changed to DOWN tun3: changing name to 'ovpnc3' pflog0: promiscuous mode enabled ovpnc3: link state changed to UP igc0: link state changed to UP igc1: link state changed to UP tun0: changing name to 'controltun0' controltun0: link state changed to UP tun_wg1: link state changed to DOWN tun_wg0: link state changed to DOWN wg0: changing name to 'tun_wg1' tun_wg1: link state changed to UP igc0: promiscuous mode enabled igc2: promiscuous mode enabled igc2.23: promiscuous mode enabled igc2.1234: promiscuous mode enabled igc2.17: promiscuous mode enabled igc2.2: promiscuous mode enabled igc2.15: promiscuous mode enabled igc1: promiscuous mode enabled igc2.11: promiscuous mode enabled igc2.6: promiscuous mode enabled igc3: promiscuous mode enabled wg1: changing name to 'tun_wg0' tun_wg0: link state changed to UP tun1: link state changed to UP tun1: changing name to 'tailscale0' controltun0: link state changed to DOWN 000.649559 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 000.657125 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 000.664756 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 000.829575 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 igc0: link state changed to DOWN 001.215161 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 001.222783 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 001.230274 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 igc0: link state changed to UP igc2.23: promiscuous mode disabled igc2.2: promiscuous mode disabled igc1: promiscuous mode disabled igc2.17: promiscuous mode disabled igc2.1234: promiscuous mode disabled igc2.6: promiscuous mode disabled igc2.15: promiscuous mode disabled igc2: promiscuous mode disabled igc2.11: promiscuous mode disabled igc3: promiscuous mode disabled igc0: promiscuous mode disabled igc0: promiscuous mode enabled igc2: promiscuous mode enabled igc2.23: promiscuous mode enabled igc2.1234: promiscuous mode enabled igc2.15: promiscuous mode enabled igc2.17: promiscuous mode enabled igc2.2: promiscuous mode enabled igc1: promiscuous mode enabled igc2.11: promiscuous mode enabled igc2.6: promiscuous mode enabled igc3: promiscuous mode enabled 050.583749 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 050.591304 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 050.598842 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 050.612510 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 igc1: link state changed to DOWN 051.018638 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 051.026204 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 051.033732 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 igc1: link state changed to UP igc2.2: promiscuous mode disabled igc2.15: promiscuous mode disabled igc2.17: promiscuous mode disabled igc2.1234: promiscuous mode disabled igc1: promiscuous mode disabled igc2.6: promiscuous mode disabled igc2.11: promiscuous mode disabled igc3: promiscuous mode disabled igc2: promiscuous mode disabled igc2.23: promiscuous mode disabled igc0: promiscuous mode disabled igc0: promiscuous mode enabled igc2: promiscuous mode enabled igc2.23: promiscuous mode enabled igc2.17: promiscuous mode enabled igc2.1234: promiscuous mode enabled igc2.2: promiscuous mode enabled igc2.15: promiscuous mode enabled igc1: promiscuous mode enabled igc2.11: promiscuous mode enabled igc2.6: promiscuous mode enabled igc3: promiscuous mode enabled tun0: changing name to 'controltun0' controltun0: link state changed to UP -
It wouldn't be shown there. If it's anyway it will be in the main system log covering the boot up time or immediately after boot.
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.