FAILOVER WITH 1 LAN and 1 WAN with 2 IP's
-
Good morning ,
I've a firewall with 2 ports: 1 lan and 1 wan and ( i beg your pardon) , I'm going to try to config a (very bad) "manual failover" with two virtual ip on Pfsense :
when needed i will plug the firewall in router A otherwise in router B , both ready to run on two different lines with two different public ip's.
I've the config below :
lan 192.168.1.0/24 - > PFsense > wan 192.168.180.254/24 and VIP 192.168.190.254/24 -> Router A ( 192.168.180.1/public ip A ) OR router B (192.168.190.1/public ip B)
I've tried to set a failover with two gateways , i've set outbound rules in hybrid mode adding VIP ip.
Now for example , when i plug in and reboot the firewall B i see the gateway group switched correctly and set itself online , i can ping ( by lan) the router B ip but cannot ping outside ( ex 8.8.4.4) and cannot reach nothing on internet .
I know that it's a crazy thing ...