[SOLVED] 2.4.0, SG-4860 will not upgrade

superweasel · Oct 14, 2017, 6:02 PM

I have a SG-4860 running 2.3.4-RELEASE-p1. When I attempted to upgrade to 2.4.0, I got a message that the upgrade failed and nothing was changed.

My setup is straight forward, PPPoE, couple of firewall rules, some VLANs, that is it.

Where do I need to look to figure out why it would not even attempt this upgrade?

Thanks,
Brent

TripleCrown · Oct 13, 2017, 3:14 PM

I also received a "Failed" on first attempt. It failed in my download. Did you try again? Mine worked perfectly the second attempt.

superweasel · Oct 13, 2017, 3:35 PM

Second time was a charm!

Thanks for the advice.

Crispix · Oct 13, 2017, 4:08 PM

Exact same experience: "failed" on the download first time. The second time worked perfectly. The reboot time was around 10 minutes, maybe a bit more.