Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    PFSense site-to-site with Tailscale and cloud cam issue

    Tailscale
    1
    1
    18
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M
      msurg
      last edited by

      Hello,

      I have two pfsense instances connected site-to-site and tailscale is installed on both and up. Tailscales are set up with "Accept Subnet Routes" enabled, advertising routes and no exit nodes. Devices can ping, connect from site A to B and vice versa.

      Site A network is 192.168.80.0/24 and Site B network is 192.168.1.0/24.

      I have a cloud cam on site B with IP address 192.168.1.43.

      When Tailscale is down I can connect from site A to cam on Site B and can get video stream with app (Smart Life).
      When Tailscale is up devices still can ping, connect from site A to B and vice versa but I cannot get the video stream from cam. It tries to connect and get stream for awhile and then gives error.

      Below are screenshots of pfsense states on site B filtered with cam IP (192.168.1.43) with Tailscale up and down.

      Someone can point me to right direction please?

      Thank you

      Capture01.JPG
      with Tailscale up

      Capture02.JPG
      with Tailscale down

      1 Reply Last reply Reply Quote 0
      • First post
        Last post
      Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.