check_upgrade: "Updating repositories metadata" returned error code 1
-
@stephenw10 Hi, we have the same problem, pfSense+ 24.11. The problem appeared since about 3 days ago.
-
It's showing as unregistered. Send me your NDI in chat and I'll check it.
-
I too have this exact problem.
-
Hello,
I have exactly same issue. I am running pfSense on Proxmox. It was all good until couple days ago i've notices empty branches and dashboard shows community edition. If i enter activation token again, it accepts it but dashboard still showing community and no updates/branches available. How can we proceed? -
Send me your NDI and order number in chat and I'll check it.
-
@stephenw10 Thank you, meanwhile I am in touch with LEV from netgate TAC. Already know about interface amount vs NDI.
-
Ah, OK. They can check that for you then.
-
Today I upgrade pfsense 2.7.2 to version 2.8 after reboot it shows in my notices on the menu bar also :
Upgrade
check_upgrade: "Updating repositories metadata" returned error code 1 @ 2025-05-30 13:34:24 -
It may fail during the upgrade or at reboot. Does that message return if you clear it? Can you see the available packages list?
-
How can I clear this message? I only see x Close and Mark All as Read buttons. yes I can see available packages list.
-
Mark it as read and it should be removed from the dashboard.
-
Ok I will try it.
I did Mark All as Read. After I reboot pfsense. Notice come back again
Upgrade
check_upgrade: "Updating repositories metadata" returned error code 1 @ 2025-05-31 01:23:18! Before upgrading pfSense from version 2.7.2 to 2.8, I removed all the installed packages. After completing the upgrade, I reinstalled the same packages again.
-
This post is deleted! -
But it only returns if you reboot? It checks for updates periodically or if you refresh the check on the dashboard. If that isn't throwing the error then it's not a general issue but something at boot.
-
I am getting this too. Everything went well with the upgrade and all works as it should but I also get the Notice after reboot (check_upgrade: "Updating repositories metadata" returned error code 1).
Seems to come up after I reload a saved backup and reboot. If I clear it and reboot and it comes right back. Don't really want to rebuild the whole firewall by hand so it would be nice if there was a solution to fix this.
My situation is an upgrade from 2.7.2 to 2.8 on pfsense CE. On the upgrade page it shows Branch 2.8 like it should. Seems to check ok. Packages show up and say they are up to date. Like I said everything seems to be ok. I tried all the things in the Upgrade Trouble Shooting Guide but none are the magic bullet for fixing this. -
@stephenw10 Now, every time I reboot, the notice does not appear. And if I refresh the check on the dashboard, the notice still doesn't come back.
However, I've encountered a new issue: when I click on certain items in the menu—such as System, Interfaces, Firewall, Services, VPN, Status, or Diagnostics—the notice appears again. I think I might need to completely reinstall the pfSense system. -
Solved my problem.
I did a clean install of 2.8 and restored a saved configuration. Got the same Notice.
Then I did a clean install of 2.7.2 and restored the same saved configuration. No notice even after several reboots.
The first time I did the upgrade from 2.7.2 to 2.8 I followed the instructions that said to uninstall packages so I did. I had three, snort, watchdog and patches (all patches applied). So I tried an upgrade again. This time when I did my upgrade from 2.7.2 to 2.8 I didn't uninstall those packages. The upgrade went off without a hitch. Also no repository metadata error.
Take it for what its worth. My box is happy now. I'll post an update if the Notice comes back. -
@Donny said in check_upgrade: "Updating repositories metadata" returned error code 1:
when I click on certain items in the menu—such as System, Interfaces, Firewall, Services, VPN, Status, or Diagnostics—the notice appears again
Hmm, in a repeatable way? Every time?
If you have some exact steps I'll try to replicate.
-
@stephenw10 Ok I will explain step by step today.
-
@stephenw10 Hello Stephenw10, This is the actual issue that occurred with pfSense 2.8 after upgrading from version 2.7.2:
- When the notification bell appears in the upper right corner of the Dashboard, I click on it. The notification message displayed is:
Upgrade
check_upgrade: "Updating repositories metadata" returned error code 1 @ 2025-06-02 10:02:41
A pop-up window appears with two options: X Close and Mark All as Read. - I click Mark All as Read, and then the notification bell disappears.
- Next, let's say I want to configure the DHCP Server. I go to Services > DHCP Server (it doesn't have to be under Services—any other menu works too). If I enter any other menu like System, Interfaces, Firewall, VPN, Status, or Diagnostics and choose any configuration option, the notification bell does not reappear, and I can configure everything normally within those menus.
- Then, I tested by rebooting the system and logging back into the pfSense Dashboard. The notification bell did not appear at the top right corner of the Dashboard.
- However, once I go into any menu and click a configuration item—for example, VPN > IPsec to configure VPN—the notification bell immediately reappears in the top right corner of the Dashboard.
- And whenever the notification bell reappears, I repeat steps 1–3.
My Installed packages:
acme 0.9_1
freeradius3 0.15.14
openvpn-client-export 1.9.5
pfBlockerNG-devel 3.2.8
System_Patches 2.2.20_2 - When the notification bell appears in the upper right corner of the Dashboard, I click on it. The notification message displayed is:
