Now Available: pfSense® CE 2.8.0-RELEASE

fireodo

I did the upgrade 2.7.2 -> 2.8.0 with all the packages (see signature) in place without any issues :-) but I recommend to take the netgate advise serious and uninstall the packages before upgrade ...

Waqar.UK

I know that removing before upgrade is the best possible way. But I upgraded without doing this. But backup the config file before.

SteveITS

@stephenw10 I suspect the question was about the "pfSense-repoc: no pfSense packages installed" error. But, the upgrade seems to have run.

On our one client with a 2.7.2 VM, after changing branches I don't see that but do see a "pfSense-repoc: open: No such file or directory" message.

SteveITS

@SteveITS said in Now Available: pfSense CE 2.8.0-RELEASE:

I don't see that

I can't seem to edit my post, but after changing back to 2.7.2 I do see the "pfSense-repoc: no package 'name' pfSense-repoc: no pfSense packages installed" message.

stephenw10

@SteveITS said in Now Available: pfSense CE 2.8.0-RELEASE:

but do see a "pfSense-repoc: open: No such file or directory" message.

Yup, it should still upgrade though if you set the branch to 2.8. That was a bug in an old repoc version but it should be upgraded by setting 2.8. Also it was cosmetic only is should still function.

sokeada

@stephenw10 thanks for multiple solutions, I'll shutdown pfSense and remove WiFi Card during today break time then I'll start to upgrade again.

tgbauer

@pfGeorge New version is working well for me so far. Looks like there is a missing closing ")" in the second line of the SHA256 file here: https://www.netgate.com/hubfs/pfSense-plus-installer-checksums.txt

This produces an error:

% sha256sum -c pfSense-plus-installer-checksums.txt
netgate-installer-amd64.img.gz: OK
netgate-installer-aarch64.img.gz: OK
sha256sum: WARNING: 1 line is improperly formatted

After adding the closing ")", it works as expected:

% sha256sum -c pfSense-plus-installer-checksums.txt
netgate-installer-amd64.img.gz: OK
netgate-installer-amd64.iso.gz: OK
netgate-installer-aarch64.img.gz: OK

jiri.zemanek

I need to compile a kernel driver. So I downloaded the pfSense/FreeBSD-src repository from GitHub, but there is no RELENG_2_8_0 branch. Using uname -a I thought there is a commit ID displayed but I have not found it in the repository either. So where do I get the FreeBSD source for this release?

stephenw10

What driver do you need?

jiri.zemanek

@jiri-zemanek OK, by using git blame ./sys/sys/param.h in the devel-main branch and traversing backwards I found

46297859a745 (John Baldwin        2024-12-06 17:25:04 -0500  76) #define __FreeBSD_version 1500029

which is the same version that reports sysctl kern.osreldate. So I'll use that.

jiri.zemanek

OK, so I installed 2.8.0 CE via the netgate installer ISO and now I am trying to install ACME plugin:

WARNING: Current pkg repository has a new PHP major
         version. pfSense should be upgraded before
         installing any new package.

When looking at the System --> Update, it says:

Current Base System  2.8.0
Latest Base System   2.7.0
Status               Running a newer version.

So not sure HOW...

It seems this release is so hot that it's still glowing...

stephenw10

It looks like your update branch is somehow set to 2.7.0. Did you restore a config with that set?

Do you see the 2.8.0 branch available to set?

Are you using any custom repos?

jiri.zemanek

@stephenw10 No, it's CLEAN install.

jiri.zemanek

@stephenw10 .....and the CLEAN install has Branch pull down menu EMPTY.

jiri.zemanek

@jiri-zemanek Out of curiosity I installed using netgate installer ISO the 2.7.2 version and it does not even show available packages because the /usr/local/etc/pkg/repos/pfSense.conf -> /usr/local/etc/pfSense/pkg/repos/pfSense_Installer-repo-0002.conf link is broken (there is no /usr/local/etc/pfSense/pkg/repos/pfSense_Installer-repo-0002.conf file). It seems the testing department is on holiday for a long time :-D

stephenw10

Seems more like you have no upstream access to pull the repo branches on either version for some reason.

In 2.8 try running: pfSense-repoc -ND see what errors it returns.

jiri.zemanek

@stephenw10 No error, just printed some system info (OS, platform, etc.). The last line some POST data.

stephenw10

Hmm, yet you still see no branches? If you run pfSense-repoc -NDJ it ll show you the branch JSON data you are passed.

What hardware are you running on? What was the driver you needed to build?

stephenw10

Ah, are you trying to run in Azure by any chance? Because that is not supported if so.

pfFog29

I don't see the CE 2.8.0 version at all, even after a reboot. Under System/Update only "Previous Stable Version (2.7.2)" or older versions show. What am I missing?