How can i install 24.11 latest formware on SG 1100
-
Hello,
Is there any possibility to install on a netgate sg 1100 the latest 24.11 firmware?
i have tried to install it but i get a failed to install error because of lack no available space
Filesystem Size Used Avail Capacity Mounted on
/dev/ufs/pfSense_Install 1.0G 898M 27M 97% /
devfs 1.0K 0B 1.0K 0% /dev
tmpfs 16M 44K 16M 0% /tmp
tmpfs 16M 360K 16M 2% /var
/dev/md3 7.3M 2.5M 4.2M 37% /etc
Is there any way to pass this issue? -
@Briareos First try to delete old Boot Environments to free space:
https://docs.netgate.com/pfsense/en/latest/troubleshooting/filesystem-shrink.htmlWorst case yes you can reinstall:
https://docs.netgate.com/pfsense/en/latest/solutions/sg-1100/reinstall-pfsense.html -
Go here : download pfsense and download the installer.
Burn it to an USB drive, see pfSense documentation who to do that.
Put the USB drive in your 1100, hook up the console access : the small USB that came with your 1100.
See pfSense documentation how to set that cable up (serial port emulation).Now, restart your 1100.
The installer will - afaik, auto start.
The installer will detect that you have a 1100 so you will be able to install pfSense Plus.
The installer will find an existing pfSense config on pfSense internal drive, and ask if you want to re use it : you'll be having all the good (and bad) setting back from before.The pfSense documentation pages will guide you through all the steps.
Btw : with a little bit less then 100 Mbytes left, you can't install a "500 Mbytes size OS". For the upgrade to happen, it has to download first all the needed files ... and that wont fit with "3 % left".
-
@Gertjan already done that, no matter how many time i tried, the outcome is the same, instalation failed
*** Added user `cyrus' (id 60)
..........
[51/177] Extracting php83-curl-8.3.12: .......... done
[52/177] Installing libuv-1.49.1...
[52/177] Extracting libuv-1.49.1: .......... done
[53/177] Installing boost-libs-1.85.0...
[53/177] Extracting boost-libs-1.85.0: ..Child process pid=5216 terminated abnormally: Killed -
See : Little confused - is 24.11 not available for SG-1100? Says at latest revision 24.03 RELEASE
which makes me think that 24.11 should work on a 1100.
You have a "Stockage 8 GB EMMC " drive on board, so it should fit.
The installer will delete all drive info (partitions) before it re creates them.maybe it's time to 'check' your emmc first ? But sorry, can't tell how you can do that from the command line .... maybe @stephenw10 has a suggestion ?
-
It seems that it is a problem with the equipment, it just died....it is not turning on anymore, i have tested it with another power source.....same outcome...this thread can be closed, thank you all for the advices
-
@Gertjan thank you for the advice, yes, 24.11 it is available, seems that it was a hardware issue.
