FreeRadius 3 - error messages

[esquire1968]

Hi!

I run FreeRadius3 on v2.4.0 and it works well. But I see very often the following messages in the log-file:

Oct 23 21:11:55 	radiusd 	13178 	(505) eap_peap: what went wrong, and how to fix the problem
Oct 23 21:11:55 	radiusd 	13178 	(505) eap_peap: Look for "reject" or "fail". Those earlier messages will tell you
Oct 23 21:11:55 	radiusd 	13178 	(505) eap_peap: to find out the reason why the user was rejected
Oct 23 21:11:55 	radiusd 	13178 	(505) eap_peap: This means you need to read the PREVIOUS messages in the debug output 

How kann I fix this.

Many thanks!

Thomas

[doktornotor]

Oct 23 21:11:55 radiusd 13178 (505) eap_peap: This means you need to read the PREVIOUS messages in the debug output

[esquire1968]

I found only the same messages …

... and this one once a day (after reconnect)

Oct 23 05:11:24 	radiusd 	13178 	Ready to process requests
Oct 23 05:11:24 	radiusd 	13178 	Loaded virtual server inner-tunnel-peap
Oct 23 05:11:24 	radiusd 	13178 	Loaded virtual server default
Oct 23 05:11:24 	radiusd 	13178 	Loaded virtual server inner-tunnel-ttls
Oct 23 05:11:24 	radiusd 	13178 	Ignoring "ldap" (see raddb/mods-available/README.rst)
Oct 23 05:11:24 	radiusd 	13178 	Ignoring "sql" (see raddb/mods-available/README.rst)
Oct 23 05:11:24 	radiusd 	13178 	Loaded virtual server <default>Oct 23 05:11:24 	radiusd 	13178 	[/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".
Oct 23 05:11:24 	radiusd 	13178 	[/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
Oct 23 05:11:24 	radiusd 	6979 	Debugger not attached</default> 

[doktornotor]

So what are you trying to solve? The message says that some authentication failed, that's it. If that's expected, then move on.