Alias error

[cjohnson]

@patient0

attempts to add a single port alias containing a single port definition fails with...

The following input errors were detected:

<bulletpointHERE>    is not a valid port or alias.

URL type aliases behave the same way.

yes, this is a prod box. i have two others that are not though.
i'm going to reserve the vi route for a last resort. i'm about to try the create/export/import thing you've mentioned now.

as far as the "out of the ordinary" item.... no. i'm trying this directly from a PC attached through a switch to one of the internal facing NICs.
OS is (among others i've tried including windows 11) Mint 21.3 with english, US.

[cjohnson]

OK.This is strange.

I can sucessfully use the "Import" button (which takes me to the "Bulk Import" page) on the main "Aliases" page to then create the alias with a range of IPs (using the "Aliases to Import" box on the subsequent page) how I want them.

If I attempt to import an exported alias XML from another box where I've created the alias how I attempted to do so to begin with, it doesn't quite work correctly.

If I then attempt to edit what I have there....

Any attempts to populate one or more of the address boxes (left column) there then save it, I get a similar looking "is not a valid host address" error as before. There's a very slight difference this time though. If i populate all three of those "testX" rows that you see in that screenshot, then try to save it... the error shows like this

So, there's for sure something jacked up with the parsing of the data once it gets into the box.
This rules out the "is my data getting munged before it even gets to the box" question.

[Anry]

Hello.
After updating the system to version 2.8.0-RELEASE (amd64)
built on Thu May 22 2:12:00 EEST 2025
FreeBSD 15.0-CURRENT
a similar problem arose.
Are there any solutions?

[johnpoz]

@Anry yeah use an actual valid FQDN or IP.. Like it says right there in the HINT in your screenshot.

test1 is not a fqdn, something like test1.home.arpa or test.domain.tld would be a fqdn - this fqdn has to be resolvable by pfsense.

[Anry]

When trying to create a new alias

I receive this message

The list of aliases now looks like this:

The contents of aliases are not displayed.
But they should be.
When editing an existing alias, list items are not displayed

There is such an alias with a list of hosts in the configuration

[Anry]

Hello.
Are there any recommendations on how to solve the problem that has arisen or do I need to reinstall the system and restore the configuration?

[johnpoz]

@Anry

What does the errors here say?

[Anry]

@johnpoz

I am attaching a screenshot.

[johnpoz]

@Anry well I would prob fix that - you have never renewed your gui cert? But that has nothing to do with the problem.

I am unable to duplicate your problem - but a complete reinstall seems like a sledge hammer to kill a fly.

I would export your aliases xml.. just so you have a copy of what you had.

Then delete them all.. And try from a clean slate for aliases.. Making sure after you delete them all that your export of xml is clean.

I even fired up my copy of 2.8 - and aliases working fine.

[Gertjan]

@johnpoz

are two individual IPs.

This looks like a IP "range" :

From 10.100.6.4 to 10.100.66.24.

Rapid solution :
Enter them individually ( )

[johnpoz]

@Gertjan you wouldn't do a range like that, range would be like this.

Then it would create the individual entries on its own. Not sure what the issue is, but I am unable to duplicate it..

The only thing comes to mind is space in there? But I tried that putting a space in front and after the IP and still works fine.

My guess would be browser doing something with it it shouldn't be - but he says he tried different browsers.

[Anry]

I have two more systems where pfsense is used. On all three systems everything worked without problems. After updating to the latest version, two systems work without errors and only one has a problem.
I compared the list and sizes of files on the pfsense website.
I found no differences. Perhaps there are other places where I could not look and check. Now I am trying to figure out the problem. It would be interesting to hear from the developer where to look. After all, it turns out that the IP address verification and conversion template does not work. I think that this is the same function that works when entering a new list and when displaying an existing one.
Tell me in which PHP file is this described?

[Gertjan]

@Anry

If all your pfSense boxes use the same version, then PHP is also the same.
Actually, identical pfSense version contain the same 'binaries' (PHP, etc).
If it works for one box, it should work for the other. And I know, this is not very helpful ...

[patient0]

@Anry said in Alias error:

The contents of aliases are not displayed.

One of your host alias got a description in Russian. Can you try remove it. It shouldn't matter at all but just trying to find what's is different.

I tried with a 2.8.0 clean install and with 2.8.0 upgrade from 2.7.2 and on Linux with Firefox and Chromium. No luck yet.

Any browser extensions installed?

[SteveITS]

@Gertjan said in Alias error:

This looks like a IP "range" :

That's how multiple IPs are listed in the xml file. (I had to look)

Putting in my "programmer hat" I would guess there is some other alias or entry in the config file that is invalid and causing problems. Non-standard characters, maybe. Maybe, drag/drop the file into a browser window or XML parser, since at least Firefox will read/display the XML.

[Anry]

In general, as my friend said, seven troubles - one reset. The situation was corrected by reinstalling the system and restoring the configuration. This can be written down as a solution to the problem.